IR2132SPBF vs IR2132STRPBF Karşılaştırma
Ayrıntılı yan yana karşılaştırma IR2132SPBF tarafından Infineon ve IR2132STRPBF tarafından InfineonAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | IR2132SPBF | IR2132STRPBF |
|---|---|---|
| Marka | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Part Number | IR2132SPBF | — |
| Manufacturer | Infineon Technologies (formerly International Rectifier) | — |
| Fonksiyon | Half-Bridge Gate Driver IC (3-phase, 6-channel) | — |
| Configuration | Inverting input | 3-Phase Bridge |
| Çıkış Sayısı | 6 (3 high-side, 3 low-side) | — |
| Maximum Offset Voltage (High-Side) | 600 V | — |
| Output Current (Source/Sink) | 0.5 A | — |
| Gate Drive Supply Voltage (VCC) | 10 V to 20 V | 10 V to 20 V |
| Logic Input Compatibility | CMOS/LSTTL, down to 2.5 V logic | — |
| Typical Deadtime | 0.8 us | — |
| Undervoltage Lockout (UVLO) | Yes, all 6 channels | Yes, on all channels |
| Bootstrap Design | Required for high-side channels | — |
| dV/dt Immunity | Yes | Yes (negative transient tolerant) |
| Negative VS Transient Tolerance | Yes | — |
| Paket | 28-SOIC (Wide Body, 7.50 mm) | 28-SOICWB (0.295 inch / 7.50 mm width) |
| Montaj Türü | Surface Mount | Surface Mount |
| İşletim Sıcaklığı Aralığı | -40C to +125C | [DATA_NEEDED: operating temperature range] |
| Lead-Free / RoHS | Yes (PbF suffix, RoHS compliant) | — |
| Packaging | Tube | — |
| Ağ Yapısı | 3-phase bridge driver for MOSFETs/IGBTs | — |
| Driver Type | — | Half-Bridge Gate Driver, Inverting Input |
| Number of Drivers | — | 6 (3 high-side + 3 low-side) |
| Offset Voltage (Max) | — | 600 V |
| Source Current (Typ.) | — | 250 mA |
| Sink Current (Typ.) | — | 500 mA |
| Propagation Delay (Typ.) | — | 675 ns |
| Internal Dead-Time (Typ.) | — | 0.8 µs |
| Input Logic | — | Inverting (HIN/LIN active-low) |
| Bootstrap Architecture | — | Yes (floating high-side channel) |
| Over-Current Protection | — | Yes, with ITRIP input and FAULT output |
| Integrated Op-Amp | — | Yes (current-sense amplifier) |
| Fault Output | — | Yes, active-low latched FAULT pin |
| RoHS Durumu | — | Compliant (PBF suffix) |