MW7IC2240NBR1 vs MW7IC2240NR1 Comparison

Detailed side-by-side comparison of MW7IC2240NBR1 by NXP Semiconductors and MW7IC2240NR1 by NXP Semiconductors. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.

NXP Semiconductors
MW7IC2240NBR1 MW7IC2240NBR1 - 4W W-CDMA RF LDMOS Power Amplifier | NXP

MW7IC2240NBR1 - 4W W-CDMA RF LDMOS Power Amplifier | NXP

MW7IC2240NBR1 Obsolete
NXP Semiconductors
MW7IC2240NR1 MW7IC2240NR1 - 4W W-CDMA RF LDMOS PA, 2110-2170 MHz | NXP

MW7IC2240NR1 - 4W W-CDMA RF LDMOS PA, 2110-2170 MHz | NXP

MW7IC2240NR1 ✓ Active

Specification Comparison

Parameter MW7IC2240NBR1 MW7IC2240NR1
Brand NXP Semiconductors NXP Semiconductors
Category RF Amplifiers RF Amplifiers
Lifecycle Status Obsolete Active
Stock Status In Stock In Stock
Unit Price (USD) $29.00 $13.16
Frequency Range 2110 MHz to 2170 MHz (usable 2000-2200 MHz) 2110 MHz to 2170 MHz (usable 2000-2200 MHz)
Modulation / RF Type W-CDMA (also TD-SCDMA, LTE) —
Output Power (Average) 4 W Avg. @ 2112.5 MHz, single-carrier W-CDMA —
Supply Voltage (VDD) 28 V (rated 24 V to 32 V operation) —
Quiescent Current Stage 1 (IDQ1) 90 mA —
Quiescent Current Stage 2 (IDQ2) 420 mA —
Minimum Gain 15 dB (typical 30 dB) —
Input VSWR 5:1 5:1
Output VSWR 5:1 5:1
Nominal Impedance 50 ohm (on-chip matched) 50 ohm (DC-blocked input, >3 ohm output)
P1dB (Output) 46 dBm (per distributor listing) —
Technology RF LDMOS (multi-stage integrated) LDMOS (Laterally Diffused MOSFET)
Package TO-272 WB-16 (over-molded plastic, 16-lead) TO-270 WBL-16 (TO-270WB16), 16-pin ceramic
Mounting Type Surface Mount Surface Mount / flange mount with ground pad
Terminal Finish Matte Tin (Sn) —
Package Body Material Plastic / Epoxy —
Operating Mode 100% PAR tested for W-CDMA-like signals —
RoHS Status [DATA_NEEDED: RoHS compliance] —
Function — RF Power Amplifier (W-CDMA, multi-stage)
Average Output Power — 4 W (W-CDMA, 28 V)
Power Gain (Min) — 15 dB
Drain Supply Voltage — 24 V to 32 V (28 V typical)
Spurious Emissions — Below -60 dBc from 100 mW to 10 W CW Pout
On-Chip Matching — Yes (input 50 ohm DC-blocked, partial output)
Quiescent Current Compensation — Integrated with temperature compensation
Enable Function — Yes
Operating Modulation Formats — W-CDMA, TD-SCDMA, LTE-FDD, multi-carrier

Datasheets & Resources

Browse All Products Create BOM Request Quote