SN65HVD75D vs SN65HVD73DGS Comparison
Detailed side-by-side comparison of SN65HVD75D by Texas Instruments and SN65HVD73DGS by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
SN65HVD75D - 3.3V 20Mbps RS-485 Transceiver | Texas Instruments
SN65HVD75D ✓ ActiveTexas Instruments
SN65HVD73DGS - 3.3V Full-Duplex RS-485 20Mbps | Texas Instruments
SN65HVD73DGS ✓ ActiveSpecification Comparison
| Parameter | SN65HVD75D | SN65HVD73DGS |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Interface ICs | Interface ICs |
| Lifecycle Status | Active | Active |
| Product Type | Half-duplex RS-485 transceiver | — |
| Supply Voltage | 3.3 V | — |
| Maximum Signaling Rate | 20 Mbps | — |
| Logic Input Compatibility | 5 V tolerant; compatible with 3.3 V or 5 V controllers | — |
| ESD Protection | IEC ESD protection on bus pins | — |
| ESD Test Model | Human Body Model and IEC Contact Discharge | — |
| Operating Temperature Range | -40°C to 125°C | — |
| Package | 8-pin SOIC (D) | 10-VSSOP (DGS) 3.0 mm × 3.0 mm |
| Mounting Type | Surface mount | Surface Mount |
| Driver and Receiver Architecture | One differential driver and one differential receiver | — |
| Duplex Mode | Half-duplex | — |
| Bus Standards | RS-485 and RS-422 compatible transceiver | — |
| Recommended Supply Bypass | 100 nF ceramic capacitor | — |
| Recommended 3.3 V Regulator | TPS76333 | — |
| Recommended Isolated Supply Reference | SN6501 | — |
| RoHS Status | [DATA_NEEDED: RoHS compliance status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH compliance status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Full |
| Supply Voltage (VCC) | — | 3 V to 3.6 V |
| Data Rate | — | 20 Mbps (max) |
| ESD Protection (Bus Pins) | — | 12 kV IEC 61000-4-2 contact discharge |
| Receiver Input Impedance | — | 1/8 unit load (up to 256 nodes) |
| Common-Mode Voltage Range | — | -7 V to +12 V |
| Driver Enable | — | Yes, active-high (DE pin) |
| Receiver Enable | — | Yes, active-low (RE pin) |
| Operating Temperature | — | -40 °C to +125 °C |
| MSL Level | — | 2 |