SN65HVD75D vs SN65HVD73DGS So sánh

So sánh chi tiết song song của SN65HVD75D bằng Texas Instruments và SN65HVD73DGS bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Texas Instruments
SN65HVD75D SN65HVD75D - 3.3V 20Mbps RS-485 Transceiver | Texas Instruments

SN65HVD75D - 3.3V 20Mbps RS-485 Transceiver | Texas Instruments

SN65HVD75D ✓ Hoạt động
Texas Instruments
SN65HVD73DGS SN65HVD73DGS - 3.3V Full-Duplex RS-485 20Mbps | Texas Instruments

SN65HVD73DGS - 3.3V Full-Duplex RS-485 20Mbps | Texas Instruments

SN65HVD73DGS ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số SN65HVD75D SN65HVD73DGS
Thương hiệu Texas Instruments Texas Instruments
Danh mục Interface ICs Interface ICs
Trạng thái vòng đời Hoạt động Hoạt động
Product Type Half-duplex RS-485 transceiver —
Điện áp cung cấp 3.3 V —
Maximum Signaling Rate 20 Mbps —
Logic Input Compatibility 5 V tolerant; compatible with 3.3 V or 5 V controllers —
ESD Protection IEC ESD protection on bus pins —
ESD Test Model Human Body Model and IEC Contact Discharge —
Khoảng nhiệt độ hoạt động -40°C to 125°C —
Hộp 8-pin SOIC (D) 10-VSSOP (DGS) 3.0 mm × 3.0 mm
Kiểu lắp đặt Surface mount Surface Mount
Driver and Receiver Architecture One differential driver and one differential receiver —
Duplex Mode Half-duplex —
Bus Standards RS-485 and RS-422 compatible transceiver —
Recommended Supply Bypass 100 nF ceramic capacitor —
Recommended 3.3 V Regulator TPS76333 —
Recommended Isolated Supply Reference SN6501 —
Trạng thái RoHS [DATA_NEEDED: RoHS compliance status] Compliant
REACH Status [DATA_NEEDED: REACH compliance status] —
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification status] —
Protocol — RS-422, RS-485
Number of Drivers/Receivers — 1/1
Duplex — Full
Supply Voltage (VCC) — 3 V to 3.6 V
Tốc độ dữ liệu — 20 Mbps (max)
ESD Protection (Bus Pins) — 12 kV IEC 61000-4-2 contact discharge
Receiver Input Impedance — 1/8 unit load (up to 256 nodes)
Common-Mode Voltage Range — -7 V to +12 V
Driver Enable — Yes, active-high (DE pin)
Receiver Enable — Yes, active-low (RE pin)
Nhiệt độ hoạt động — -40 °C to +125 °C
Cấp MSL — 2

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá