SN65HVD75D vs SN65HVD73DGS तुलना

विस्तृत दोनों ओर की तुलना SN65HVD75D द्वारा Texas Instruments और SN65HVD73DGS द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Texas Instruments
SN65HVD75D SN65HVD75D - 3.3V 20Mbps RS-485 Transceiver | Texas Instruments

SN65HVD75D - 3.3V 20Mbps RS-485 Transceiver | Texas Instruments

SN65HVD75D ✓ सक्रिय
Texas Instruments
SN65HVD73DGS SN65HVD73DGS - 3.3V Full-Duplex RS-485 20Mbps | Texas Instruments

SN65HVD73DGS - 3.3V Full-Duplex RS-485 20Mbps | Texas Instruments

SN65HVD73DGS ✓ सक्रिय

विशेषता तुलना

पैरामीटर SN65HVD75D SN65HVD73DGS
ब्रांड Texas Instruments Texas Instruments
श्रेणी Interface ICs Interface ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type Half-duplex RS-485 transceiver —
सप्लाई वोल्टेज 3.3 V —
Maximum Signaling Rate 20 Mbps —
Logic Input Compatibility 5 V tolerant; compatible with 3.3 V or 5 V controllers —
ESD Protection IEC ESD protection on bus pins —
ESD Test Model Human Body Model and IEC Contact Discharge —
ऑपरेटिंग तापमान रेंज -40°C to 125°C —
पैकेज 8-pin SOIC (D) 10-VSSOP (DGS) 3.0 mm × 3.0 mm
माउंटिंग प्रकार Surface mount Surface Mount
Driver and Receiver Architecture One differential driver and one differential receiver —
Duplex Mode Half-duplex —
Bus Standards RS-485 and RS-422 compatible transceiver —
Recommended Supply Bypass 100 nF ceramic capacitor —
Recommended 3.3 V Regulator TPS76333 —
Recommended Isolated Supply Reference SN6501 —
RoHS स्थिति [DATA_NEEDED: RoHS compliance status] Compliant
REACH Status [DATA_NEEDED: REACH compliance status] —
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification status] —
Protocol — RS-422, RS-485
Number of Drivers/Receivers — 1/1
Duplex — Full
Supply Voltage (VCC) — 3 V to 3.6 V
डेटा दर — 20 Mbps (max)
ESD Protection (Bus Pins) — 12 kV IEC 61000-4-2 contact discharge
Receiver Input Impedance — 1/8 unit load (up to 256 nodes)
Common-Mode Voltage Range — -7 V to +12 V
Driver Enable — Yes, active-high (DE pin)
Receiver Enable — Yes, active-low (RE pin)
ऑपरेटिंग तापमान — -40 °C to +125 °C
MSL स्तर — 2

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध