SN65HVD75D vs SN65HVD73DGS Сравнение
Подробное сравнение бок о бок SN65HVD75D от Texas Instruments и SN65HVD73DGS от Texas Instruments. Сравните ключевые характеристики, электрические параметры, упаковку, статус жизненного цикла, цены и наличие, чтобы выбрать лучший компонент для ваших требований.
Texas Instruments
SN65HVD75D - 3.3V 20Mbps RS-485 Transceiver | Texas Instruments
SN65HVD75D ✓ АктивенTexas Instruments
SN65HVD73DGS - 3.3V Full-Duplex RS-485 20Mbps | Texas Instruments
SN65HVD73DGS ✓ АктивенСравнение характеристик
| Параметр | SN65HVD75D | SN65HVD73DGS |
|---|---|---|
| Бренд | Texas Instruments | Texas Instruments |
| Категория | Interface ICs | Interface ICs |
| Статус жизненного цикла | Активен | Активен |
| Product Type | Half-duplex RS-485 transceiver | — |
| Напряжение питания | 3.3 V | — |
| Maximum Signaling Rate | 20 Mbps | — |
| Logic Input Compatibility | 5 V tolerant; compatible with 3.3 V or 5 V controllers | — |
| ESD Protection | IEC ESD protection on bus pins | — |
| ESD Test Model | Human Body Model and IEC Contact Discharge | — |
| Диапазон рабочих температур | -40°C to 125°C | — |
| Корпус | 8-pin SOIC (D) | 10-VSSOP (DGS) 3.0 mm × 3.0 mm |
| Тип монтажа | Surface mount | Surface Mount |
| Driver and Receiver Architecture | One differential driver and one differential receiver | — |
| Duplex Mode | Half-duplex | — |
| Bus Standards | RS-485 and RS-422 compatible transceiver | — |
| Recommended Supply Bypass | 100 nF ceramic capacitor | — |
| Recommended 3.3 V Regulator | TPS76333 | — |
| Recommended Isolated Supply Reference | SN6501 | — |
| Статус RoHS | [DATA_NEEDED: RoHS compliance status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH compliance status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Full |
| Supply Voltage (VCC) | — | 3 V to 3.6 V |
| Скорость передачи данных | — | 20 Mbps (max) |
| ESD Protection (Bus Pins) | — | 12 kV IEC 61000-4-2 contact discharge |
| Receiver Input Impedance | — | 1/8 unit load (up to 256 nodes) |
| Common-Mode Voltage Range | — | -7 V to +12 V |
| Driver Enable | — | Yes, active-high (DE pin) |
| Receiver Enable | — | Yes, active-low (RE pin) |
| Рабочая температура | — | -40 °C to +125 °C |
| Уровень MSL | — | 2 |