SN65HVD75D vs SN65HVD73DGS 比較

詳細並排比較 SN65HVD75D 由 Texas Instruments 與 SN65HVD73DGS 由 Texas Instruments. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。

Texas Instruments
SN65HVD75D SN65HVD75D - 3.3V 20Mbps RS-485 Transceiver | Texas Instruments

SN65HVD75D - 3.3V 20Mbps RS-485 Transceiver | Texas Instruments

SN65HVD75D ✓ 啟用中
Texas Instruments
SN65HVD73DGS SN65HVD73DGS - 3.3V Full-Duplex RS-485 20Mbps | Texas Instruments

SN65HVD73DGS - 3.3V Full-Duplex RS-485 20Mbps | Texas Instruments

SN65HVD73DGS ✓ 啟用中

規格比較

參數 SN65HVD75D SN65HVD73DGS
品牌 Texas Instruments Texas Instruments
類別 Interface ICs Interface ICs
生命週期狀態 啟用中 啟用中
Product Type Half-duplex RS-485 transceiver —
供應電壓 3.3 V —
Maximum Signaling Rate 20 Mbps —
Logic Input Compatibility 5 V tolerant; compatible with 3.3 V or 5 V controllers —
ESD Protection IEC ESD protection on bus pins —
ESD Test Model Human Body Model and IEC Contact Discharge —
工作溫度範圍 -40°C to 125°C —
封裝 8-pin SOIC (D) 10-VSSOP (DGS) 3.0 mm × 3.0 mm
安裝類型 Surface mount Surface Mount
Driver and Receiver Architecture One differential driver and one differential receiver —
Duplex Mode Half-duplex —
Bus Standards RS-485 and RS-422 compatible transceiver —
Recommended Supply Bypass 100 nF ceramic capacitor —
Recommended 3.3 V Regulator TPS76333 —
Recommended Isolated Supply Reference SN6501 —
RoHS 狀態 [DATA_NEEDED: RoHS compliance status] Compliant
REACH Status [DATA_NEEDED: REACH compliance status] —
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification status] —
Protocol — RS-422, RS-485
Number of Drivers/Receivers — 1/1
Duplex — Full
Supply Voltage (VCC) — 3 V to 3.6 V
資料速率 — 20 Mbps (max)
ESD Protection (Bus Pins) — 12 kV IEC 61000-4-2 contact discharge
Receiver Input Impedance — 1/8 unit load (up to 256 nodes)
Common-Mode Voltage Range — -7 V to +12 V
Driver Enable — Yes, active-high (DE pin)
Receiver Enable — Yes, active-low (RE pin)
工作溫度 — -40 °C to +125 °C
MSL 等級 — 2

資料表與資源

瀏覽所有產品 建立 BOM 索取報價