SN65HVD75D vs SN65HVD73DGS 比較

詳細な並列比較: SN65HVD75D メーカー: Texas Instruments および SN65HVD73DGS メーカー: Texas Instruments。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。

Texas Instruments
SN65HVD75D SN65HVD75D - 3.3V 20Mbps RS-485 Transceiver | Texas Instruments

SN65HVD75D - 3.3V 20Mbps RS-485 Transceiver | Texas Instruments

SN65HVD75D ✓ 生産中
Texas Instruments
SN65HVD73DGS SN65HVD73DGS - 3.3V Full-Duplex RS-485 20Mbps | Texas Instruments

SN65HVD73DGS - 3.3V Full-Duplex RS-485 20Mbps | Texas Instruments

SN65HVD73DGS ✓ 生産中

仕様比較

パラメータ SN65HVD75D SN65HVD73DGS
ブランド Texas Instruments Texas Instruments
カテゴリ Interface ICs Interface ICs
ライフサイクル状態 有効 有効
Product Type Half-duplex RS-485 transceiver —
電源電圧 3.3 V —
Maximum Signaling Rate 20 Mbps —
Logic Input Compatibility 5 V tolerant; compatible with 3.3 V or 5 V controllers —
ESD Protection IEC ESD protection on bus pins —
ESD Test Model Human Body Model and IEC Contact Discharge —
動作温度範囲 -40°C to 125°C —
パッケージ 8-pin SOIC (D) 10-VSSOP (DGS) 3.0 mm × 3.0 mm
実装タイプ Surface mount Surface Mount
Driver and Receiver Architecture One differential driver and one differential receiver —
Duplex Mode Half-duplex —
Bus Standards RS-485 and RS-422 compatible transceiver —
Recommended Supply Bypass 100 nF ceramic capacitor —
Recommended 3.3 V Regulator TPS76333 —
Recommended Isolated Supply Reference SN6501 —
RoHS ステータス [DATA_NEEDED: RoHS compliance status] Compliant
REACH Status [DATA_NEEDED: REACH compliance status] —
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification status] —
Protocol — RS-422, RS-485
Number of Drivers/Receivers — 1/1
Duplex — Full
Supply Voltage (VCC) — 3 V to 3.6 V
データレート — 20 Mbps (max)
ESD Protection (Bus Pins) — 12 kV IEC 61000-4-2 contact discharge
Receiver Input Impedance — 1/8 unit load (up to 256 nodes)
Common-Mode Voltage Range — -7 V to +12 V
Driver Enable — Yes, active-high (DE pin)
Receiver Enable — Yes, active-low (RE pin)
動作温度 — -40 °C to +125 °C
MSLレベル — 2

データシート&リソース

すべての製品を閲覧 BOMを作成 見積もり依頼