SN65HVD75D vs SN65HVD73DGS Ikinahambing

Detalyadong pagkakahiwalay na pagkakahambing ng SN65HVD75D sa pamamagitan ng Texas Instruments at SN65HVD73DGS sa pamamagitan ng Texas Instruments. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.

Texas Instruments
SN65HVD75D SN65HVD75D - 3.3V 20Mbps RS-485 Transceiver | Texas Instruments

SN65HVD75D - 3.3V 20Mbps RS-485 Transceiver | Texas Instruments

SN65HVD75D ✓ Nakahanda
Texas Instruments
SN65HVD73DGS SN65HVD73DGS - 3.3V Full-Duplex RS-485 20Mbps | Texas Instruments

SN65HVD73DGS - 3.3V Full-Duplex RS-485 20Mbps | Texas Instruments

SN65HVD73DGS ✓ Nakahanda

Pagsanggunian na paghahambing

Parametro SN65HVD75D SN65HVD73DGS
Brand Texas Instruments Texas Instruments
Kategorya Interface ICs Interface ICs
Katayuan ng Lifecycle Aktibo Aktibo
Product Type Half-duplex RS-485 transceiver —
Volte ng Pagbibigay 3.3 V —
Maximum Signaling Rate 20 Mbps —
Logic Input Compatibility 5 V tolerant; compatible with 3.3 V or 5 V controllers —
ESD Protection IEC ESD protection on bus pins —
ESD Test Model Human Body Model and IEC Contact Discharge —
Hanay ng Temperature na Operasyon -40°C to 125°C —
Packhaging 8-pin SOIC (D) 10-VSSOP (DGS) 3.0 mm × 3.0 mm
Uri ng Pagpapasok Surface mount Surface Mount
Driver and Receiver Architecture One differential driver and one differential receiver —
Duplex Mode Half-duplex —
Bus Standards RS-485 and RS-422 compatible transceiver —
Recommended Supply Bypass 100 nF ceramic capacitor —
Recommended 3.3 V Regulator TPS76333 —
Recommended Isolated Supply Reference SN6501 —
Tindminan RoHS [DATA_NEEDED: RoHS compliance status] Compliant
REACH Status [DATA_NEEDED: REACH compliance status] —
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification status] —
Protocol — RS-422, RS-485
Number of Drivers/Receivers — 1/1
Duplex — Full
Supply Voltage (VCC) — 3 V to 3.6 V
Rate ng Data — 20 Mbps (max)
ESD Protection (Bus Pins) — 12 kV IEC 61000-4-2 contact discharge
Receiver Input Impedance — 1/8 unit load (up to 256 nodes)
Common-Mode Voltage Range — -7 V to +12 V
Driver Enable — Yes, active-high (DE pin)
Receiver Enable — Yes, active-low (RE pin)
Temperature na Operasyon — -40 °C to +125 °C
Level ng MSL — 2

Mga Datasheets at Resources

Tingnan ang Lahat ng mga Produkto Lumikha ng BOM Hilingin ang Kita