MPX2010DP vs MPX12D Vergleich
Detaillierter Direktvergleich von MPX2010DP von NXP Semiconductors und MPX12D von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | MPX2010DP | MPX12D |
|---|---|---|
| Marke | NXP Semiconductors | NXP Semiconductors |
| Kategorie | Pressure Sensors | Pressure Sensors |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $8,50 | $4,75 |
| Sensortyp | Differential Pressure Sensor | — |
| Pressure Range | 0 to 10 kPa (0 to 1.45 PSI) | — |
| Technology | Piezoresistive (silicon strain gauge bridge) | Piezoresistive MEMS silicon shear strain gauge |
| Ausgangstyp | Analog voltage, Wheatstone bridge (mV level) | Wheatstone Bridge (uncompensated) |
| Typical Full-Scale Span | 25 mV at 10 V excitation | — |
| Zero Pressure Offset | 0 mV nominally (±1.0 mV max) | — |
| Versorgungsspannung | 10 V DC typical (max 16 V) | 3 V typical |
| Linearity | ±0.05% (typ) | — |
| Temperature Compensation | 0 °C to +85 °C (on-chip) | — |
| Betriebstemperatur | -40 °C to +125 °C | 0 °C to +85 °C |
| Response Time | 1.0 ms (typical) | — |
| Maximum Overpressure | 75 kPa | — |
| Burst Pressure | 200 kPa | — |
| Port Configuration | Dual ports (differential), 0.19 inch / 4.93 mm tubes | — |
| Package / Mounting | 4-SIP Module (through-hole with axial tubes) | — |
| Media Compatibility | Dry air or non-corrosive gas | — |
| RoHS-Status | Compliant | [DATA_NEEDED: RoHS compliance status] |
| Pressure Type | — | Differential |
| Operating Pressure | — | 1.45 PSI (10 kPa) |
| Maximum Overload Pressure | — | 10.88 PSI (75 kPa) |
| Full-Scale Output Voltage | — | 0 to 55 mV (at 3 V supply) |
| Accuracy | — | ±5% |
| Termination Style | — | PCB (through-hole) |
| Gehäuse | — | 4-SIP Module |
| Port Size | — | Female, 0.136 in (3.45 mm) |
| Port Style | — | No Port (base-side pressure inlet) |
| Compensation | — | Uncompensated (external compensation required) |
| Montageart | — | Through-Hole |