MPX2010DP vs MPX12D Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng MPX2010DP sa pamamagitan ng NXP Semiconductors at MPX12D sa pamamagitan ng NXP Semiconductors. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
NXP Semiconductors
MPX2010DP - 10 kPa Differential Pressure Sensor | NXP/STMicro
MPX2010DP ✓ NakahandaNXP Semiconductors
MPX12D - 10 kPa Diff Pressure Sensor, 4-SIP | NXP Semiconductors
MPX12D ✓ NakahandaPagsanggunian na paghahambing
| Parametro | MPX2010DP | MPX12D |
|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors |
| Kategorya | Pressure Sensors | Pressure Sensors |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Type ng Sensor | Differential Pressure Sensor | — |
| Pressure Range | 0 to 10 kPa (0 to 1.45 PSI) | — |
| Technology | Piezoresistive (silicon strain gauge bridge) | Piezoresistive MEMS silicon shear strain gauge |
| Type ng Output | Analog voltage, Wheatstone bridge (mV level) | Wheatstone Bridge (uncompensated) |
| Typical Full-Scale Span | 25 mV at 10 V excitation | — |
| Zero Pressure Offset | 0 mV nominally (±1.0 mV max) | — |
| Volte ng Pagbibigay | 10 V DC typical (max 16 V) | 3 V typical |
| Linearity | ±0.05% (typ) | — |
| Temperature Compensation | 0 °C to +85 °C (on-chip) | — |
| Temperature na Operasyon | -40 °C to +125 °C | 0 °C to +85 °C |
| Response Time | 1.0 ms (typical) | — |
| Maximum Overpressure | 75 kPa | — |
| Burst Pressure | 200 kPa | — |
| Port Configuration | Dual ports (differential), 0.19 inch / 4.93 mm tubes | — |
| Package / Mounting | 4-SIP Module (through-hole with axial tubes) | — |
| Media Compatibility | Dry air or non-corrosive gas | — |
| Tindminan RoHS | Compliant | [DATA_NEEDED: RoHS compliance status] |
| Pressure Type | — | Differential |
| Operating Pressure | — | 1.45 PSI (10 kPa) |
| Maximum Overload Pressure | — | 10.88 PSI (75 kPa) |
| Full-Scale Output Voltage | — | 0 to 55 mV (at 3 V supply) |
| Accuracy | — | ±5% |
| Termination Style | — | PCB (through-hole) |
| Packhaging | — | 4-SIP Module |
| Port Size | — | Female, 0.136 in (3.45 mm) |
| Port Style | — | No Port (base-side pressure inlet) |
| Compensation | — | Uncompensated (external compensation required) |
| Uri ng Pagpapasok | — | Through-Hole |