MPX2010DP vs MPX12D 比較
詳細並排比較 MPX2010DP 由 NXP Semiconductors 與 MPX12D 由 NXP Semiconductors. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
規格比較
| 參數 | MPX2010DP | MPX12D |
|---|---|---|
| 品牌 | NXP Semiconductors | NXP Semiconductors |
| 類別 | Pressure Sensors | Pressure Sensors |
| 生命週期狀態 | 啟用中 | 啟用中 |
| 感測器類型 | Differential Pressure Sensor | — |
| Pressure Range | 0 to 10 kPa (0 to 1.45 PSI) | — |
| Technology | Piezoresistive (silicon strain gauge bridge) | Piezoresistive MEMS silicon shear strain gauge |
| 輸出類型 | Analog voltage, Wheatstone bridge (mV level) | Wheatstone Bridge (uncompensated) |
| Typical Full-Scale Span | 25 mV at 10 V excitation | — |
| Zero Pressure Offset | 0 mV nominally (±1.0 mV max) | — |
| 供應電壓 | 10 V DC typical (max 16 V) | 3 V typical |
| Linearity | ±0.05% (typ) | — |
| Temperature Compensation | 0 °C to +85 °C (on-chip) | — |
| 工作溫度 | -40 °C to +125 °C | 0 °C to +85 °C |
| Response Time | 1.0 ms (typical) | — |
| Maximum Overpressure | 75 kPa | — |
| Burst Pressure | 200 kPa | — |
| Port Configuration | Dual ports (differential), 0.19 inch / 4.93 mm tubes | — |
| Package / Mounting | 4-SIP Module (through-hole with axial tubes) | — |
| Media Compatibility | Dry air or non-corrosive gas | — |
| RoHS 狀態 | Compliant | [DATA_NEEDED: RoHS compliance status] |
| Pressure Type | — | Differential |
| Operating Pressure | — | 1.45 PSI (10 kPa) |
| Maximum Overload Pressure | — | 10.88 PSI (75 kPa) |
| Full-Scale Output Voltage | — | 0 to 55 mV (at 3 V supply) |
| Accuracy | — | ±5% |
| Termination Style | — | PCB (through-hole) |
| 封裝 | — | 4-SIP Module |
| Port Size | — | Female, 0.136 in (3.45 mm) |
| Port Style | — | No Port (base-side pressure inlet) |
| Compensation | — | Uncompensated (external compensation required) |
| 安裝類型 | — | Through-Hole |