MPX2010DP vs MPX12D So sánh

So sánh chi tiết song song của MPX2010DP bằng NXP Semiconductors và MPX12D bằng NXP Semiconductors. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

NXP Semiconductors
MPX2010DP MPX2010DP - 10 kPa Differential Pressure Sensor | NXP/STMicro

MPX2010DP - 10 kPa Differential Pressure Sensor | NXP/STMicro

MPX2010DP ✓ Hoạt động
NXP Semiconductors
MPX12D MPX12D - 10 kPa Diff Pressure Sensor, 4-SIP | NXP Semiconductors

MPX12D - 10 kPa Diff Pressure Sensor, 4-SIP | NXP Semiconductors

MPX12D ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số MPX2010DP MPX12D
Thương hiệu NXP Semiconductors NXP Semiconductors
Danh mục Pressure Sensors Pressure Sensors
Trạng thái vòng đời Hoạt động Hoạt động
Kiểu cảm biến Differential Pressure Sensor —
Pressure Range 0 to 10 kPa (0 to 1.45 PSI) —
Technology Piezoresistive (silicon strain gauge bridge) Piezoresistive MEMS silicon shear strain gauge
Kiểu đầu ra Analog voltage, Wheatstone bridge (mV level) Wheatstone Bridge (uncompensated)
Typical Full-Scale Span 25 mV at 10 V excitation —
Zero Pressure Offset 0 mV nominally (±1.0 mV max) —
Điện áp cung cấp 10 V DC typical (max 16 V) 3 V typical
Linearity ±0.05% (typ) —
Temperature Compensation 0 °C to +85 °C (on-chip) —
Nhiệt độ hoạt động -40 °C to +125 °C 0 °C to +85 °C
Response Time 1.0 ms (typical) —
Maximum Overpressure 75 kPa —
Burst Pressure 200 kPa —
Port Configuration Dual ports (differential), 0.19 inch / 4.93 mm tubes —
Package / Mounting 4-SIP Module (through-hole with axial tubes) —
Media Compatibility Dry air or non-corrosive gas —
Trạng thái RoHS Compliant [DATA_NEEDED: RoHS compliance status]
Pressure Type — Differential
Operating Pressure — 1.45 PSI (10 kPa)
Maximum Overload Pressure — 10.88 PSI (75 kPa)
Full-Scale Output Voltage — 0 to 55 mV (at 3 V supply)
Accuracy — ±5%
Termination Style — PCB (through-hole)
Hộp — 4-SIP Module
Port Size — Female, 0.136 in (3.45 mm)
Port Style — No Port (base-side pressure inlet)
Compensation — Uncompensated (external compensation required)
Kiểu lắp đặt — Through-Hole

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá