MPX2010DP vs MPX12D 비교
다음의 상세 나란히 비교: MPX2010DP 제조: NXP Semiconductors 및 MPX12D 제조: NXP Semiconductors. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | MPX2010DP | MPX12D |
|---|---|---|
| 브랜드 | NXP Semiconductors | NXP Semiconductors |
| 카테고리 | Pressure Sensors | Pressure Sensors |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $8.50 | $4.75 |
| 센서 유형 | Differential Pressure Sensor | — |
| Pressure Range | 0 to 10 kPa (0 to 1.45 PSI) | — |
| Technology | Piezoresistive (silicon strain gauge bridge) | Piezoresistive MEMS silicon shear strain gauge |
| 출력 유형 | Analog voltage, Wheatstone bridge (mV level) | Wheatstone Bridge (uncompensated) |
| Typical Full-Scale Span | 25 mV at 10 V excitation | — |
| Zero Pressure Offset | 0 mV nominally (±1.0 mV max) | — |
| 공급 전압 | 10 V DC typical (max 16 V) | 3 V typical |
| Linearity | ±0.05% (typ) | — |
| Temperature Compensation | 0 °C to +85 °C (on-chip) | — |
| 동작 온도 | -40 °C to +125 °C | 0 °C to +85 °C |
| Response Time | 1.0 ms (typical) | — |
| Maximum Overpressure | 75 kPa | — |
| Burst Pressure | 200 kPa | — |
| Port Configuration | Dual ports (differential), 0.19 inch / 4.93 mm tubes | — |
| Package / Mounting | 4-SIP Module (through-hole with axial tubes) | — |
| Media Compatibility | Dry air or non-corrosive gas | — |
| RoHS 상태 | Compliant | [DATA_NEEDED: RoHS compliance status] |
| Pressure Type | — | Differential |
| Operating Pressure | — | 1.45 PSI (10 kPa) |
| Maximum Overload Pressure | — | 10.88 PSI (75 kPa) |
| Full-Scale Output Voltage | — | 0 to 55 mV (at 3 V supply) |
| Accuracy | — | ±5% |
| Termination Style | — | PCB (through-hole) |
| 패키지 | — | 4-SIP Module |
| Port Size | — | Female, 0.136 in (3.45 mm) |
| Port Style | — | No Port (base-side pressure inlet) |
| Compensation | — | Uncompensated (external compensation required) |
| 실장 유형 | — | Through-Hole |