MPXC2011DT1 vs MPX10DP Vergleich
Detaillierter Direktvergleich von MPXC2011DT1 von NXP Semiconductors und MPX10DP von STMicroelectronics. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
NXP Semiconductors
MPXC2011DT1 - 10kPa Differential Pressure Sensor 4-SSIP | NXP
MPXC2011DT1 ✓ AktivSTMicroelectronics
MPX10DP - 10kPa Differential Pressure Sensor 35mV | STMicroelectronics
MPX10DP ✓ AktivSpezifikationsvergleich
| Parameter | MPXC2011DT1 | MPX10DP |
|---|---|---|
| Marke | NXP Semiconductors | STMicroelectronics |
| Kategorie | Pressure Sensors | Pressure Sensors |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $14,95 | $6,09 |
| Pressure Type | Differential | Differential |
| Operating Pressure Range | 0 kPa to 10 kPa (0 PSI to 1.45 PSI) | 0 kPa to 10 kPa (0 to 1.45 PSI) |
| Full-Scale Output | 25 mV typical at 10 V excitation | — |
| Sensitivity | 2.5 mV/kPa typical | — |
| Excitation Voltage | 3 V DC to 10 V DC (10 V nominal) | — |
| Ausgangstyp | Analog Wheatstone bridge (ratiometric) | Analog Wheatstone bridge (uncompensated) |
| Gehäuse | 4-SSIP Chip Pak module, side port | — |
| Port Style | Female, 3.25 mm (0.128 in) barbed side port | — |
| Termination Style | Through-hole PCB, 4 leads | — |
| Betriebstemperatur | 0 °C to +85 °C | [DATA_NEEDED: operating temperature range] |
| Compensation | On-chip temperature compensated and calibrated | — |
| Technology | Piezoresistive silicon strain gauge | — |
| Module Dimensions | 7.6 mm x 12.8 mm nominal | — |
| Montageart | Through-hole (PCB mount with side-port tubing) | Through-Hole |
| RoHS-Status | [DATA_NEEDED: RoHS status not in web data] | [DATA_NEEDED: RoHS status] |
| Maximum Overload Pressure | — | [DATA_NEEDED: maximum overload pressure] |
| Output Voltage Span | — | 0 mV to 35 mV at 3 V excitation |
| Supply Voltage (Excitation) | — | 3 V DC typical |
| Port Configuration | — | Dual male 0.19 in (4.93 mm) tube, axial |
| Gehäuse / Bauform | — | 4-SIP Module |
| Bridge Impedance | — | [DATA_NEEDED: input/output bridge resistance] |
| Linearity | — | [DATA_NEEDED: linearity %FS] |
| Temperature Compensation | — | None (uncompensated) |
| Media Compatibility | — | Dry gases (non-corrosive) |