MPXC2011DT1 vs MPX10DP Perbandingan
Perbandingan bersamaan detil MPXC2011DT1 dari NXP Semiconductors dan MPX10DP dari STMicroelectronics. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
NXP Semiconductors
MPXC2011DT1 - 10kPa Differential Pressure Sensor 4-SSIP | NXP
MPXC2011DT1 ✓ AktifSTMicroelectronics
MPX10DP - 10kPa Differential Pressure Sensor 35mV | STMicroelectronics
MPX10DP ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | MPXC2011DT1 | MPX10DP |
|---|---|---|
| Merek | NXP Semiconductors | STMicroelectronics |
| Kategori | Pressure Sensors | Pressure Sensors |
| Status Lingkungan Hidup | Aktif | Aktif |
| Pressure Type | Differential | Differential |
| Operating Pressure Range | 0 kPa to 10 kPa (0 PSI to 1.45 PSI) | 0 kPa to 10 kPa (0 to 1.45 PSI) |
| Full-Scale Output | 25 mV typical at 10 V excitation | — |
| Sensitivity | 2.5 mV/kPa typical | — |
| Excitation Voltage | 3 V DC to 10 V DC (10 V nominal) | — |
| Tipe Output | Analog Wheatstone bridge (ratiometric) | Analog Wheatstone bridge (uncompensated) |
| Paket | 4-SSIP Chip Pak module, side port | — |
| Port Style | Female, 3.25 mm (0.128 in) barbed side port | — |
| Termination Style | Through-hole PCB, 4 leads | — |
| Suhu Kerja | 0 °C to +85 °C | [DATA_NEEDED: operating temperature range] |
| Compensation | On-chip temperature compensated and calibrated | — |
| Technology | Piezoresistive silicon strain gauge | — |
| Module Dimensions | 7.6 mm x 12.8 mm nominal | — |
| Tipe Mounting | Through-hole (PCB mount with side-port tubing) | Through-Hole |
| Status RoHS | [DATA_NEEDED: RoHS status not in web data] | [DATA_NEEDED: RoHS status] |
| Maximum Overload Pressure | — | [DATA_NEEDED: maximum overload pressure] |
| Output Voltage Span | — | 0 mV to 35 mV at 3 V excitation |
| Supply Voltage (Excitation) | — | 3 V DC typical |
| Port Configuration | — | Dual male 0.19 in (4.93 mm) tube, axial |
| Paket / Case | — | 4-SIP Module |
| Bridge Impedance | — | [DATA_NEEDED: input/output bridge resistance] |
| Linearity | — | [DATA_NEEDED: linearity %FS] |
| Temperature Compensation | — | None (uncompensated) |
| Media Compatibility | — | Dry gases (non-corrosive) |