MPXC2011DT1 vs MPX10DP So sánh

So sánh chi tiết song song của MPXC2011DT1 bằng NXP Semiconductors và MPX10DP bằng STMicroelectronics. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

NXP Semiconductors
MPXC2011DT1 MPXC2011DT1 - 10kPa Differential Pressure Sensor 4-SSIP | NXP

MPXC2011DT1 - 10kPa Differential Pressure Sensor 4-SSIP | NXP

MPXC2011DT1 ✓ Hoạt động
STMicroelectronics
MPX10DP MPX10DP - 10kPa Differential Pressure Sensor 35mV | STMicroelectronics

MPX10DP - 10kPa Differential Pressure Sensor 35mV | STMicroelectronics

MPX10DP ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số MPXC2011DT1 MPX10DP
Thương hiệu NXP Semiconductors STMicroelectronics
Danh mục Pressure Sensors Pressure Sensors
Trạng thái vòng đời Hoạt động Hoạt động
Pressure Type Differential Differential
Operating Pressure Range 0 kPa to 10 kPa (0 PSI to 1.45 PSI) 0 kPa to 10 kPa (0 to 1.45 PSI)
Full-Scale Output 25 mV typical at 10 V excitation —
Sensitivity 2.5 mV/kPa typical —
Excitation Voltage 3 V DC to 10 V DC (10 V nominal) —
Kiểu đầu ra Analog Wheatstone bridge (ratiometric) Analog Wheatstone bridge (uncompensated)
Hộp 4-SSIP Chip Pak module, side port —
Port Style Female, 3.25 mm (0.128 in) barbed side port —
Termination Style Through-hole PCB, 4 leads —
Nhiệt độ hoạt động 0 °C to +85 °C [DATA_NEEDED: operating temperature range]
Compensation On-chip temperature compensated and calibrated —
Technology Piezoresistive silicon strain gauge —
Module Dimensions 7.6 mm x 12.8 mm nominal —
Kiểu lắp đặt Through-hole (PCB mount with side-port tubing) Through-Hole
Trạng thái RoHS [DATA_NEEDED: RoHS status not in web data] [DATA_NEEDED: RoHS status]
Maximum Overload Pressure — [DATA_NEEDED: maximum overload pressure]
Output Voltage Span — 0 mV to 35 mV at 3 V excitation
Supply Voltage (Excitation) — 3 V DC typical
Port Configuration — Dual male 0.19 in (4.93 mm) tube, axial
Hộp / Vỏ — 4-SIP Module
Bridge Impedance — [DATA_NEEDED: input/output bridge resistance]
Linearity — [DATA_NEEDED: linearity %FS]
Temperature Compensation — None (uncompensated)
Media Compatibility — Dry gases (non-corrosive)

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá