MPXC2011DT1 vs MPX10DP तुलना
विस्तृत दोनों ओर की तुलना MPXC2011DT1 द्वारा NXP Semiconductors और MPX10DP द्वारा STMicroelectronics. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
NXP Semiconductors
MPXC2011DT1 - 10kPa Differential Pressure Sensor 4-SSIP | NXP
MPXC2011DT1 ✓ सक्रियSTMicroelectronics
MPX10DP - 10kPa Differential Pressure Sensor 35mV | STMicroelectronics
MPX10DP ✓ सक्रियविशेषता तुलना
| पैरामीटर | MPXC2011DT1 | MPX10DP |
|---|---|---|
| ब्रांड | NXP Semiconductors | STMicroelectronics |
| श्रेणी | Pressure Sensors | Pressure Sensors |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Pressure Type | Differential | Differential |
| Operating Pressure Range | 0 kPa to 10 kPa (0 PSI to 1.45 PSI) | 0 kPa to 10 kPa (0 to 1.45 PSI) |
| Full-Scale Output | 25 mV typical at 10 V excitation | — |
| Sensitivity | 2.5 mV/kPa typical | — |
| Excitation Voltage | 3 V DC to 10 V DC (10 V nominal) | — |
| आउटपुट प्रकार | Analog Wheatstone bridge (ratiometric) | Analog Wheatstone bridge (uncompensated) |
| पैकेज | 4-SSIP Chip Pak module, side port | — |
| Port Style | Female, 3.25 mm (0.128 in) barbed side port | — |
| Termination Style | Through-hole PCB, 4 leads | — |
| ऑपरेटिंग तापमान | 0 °C to +85 °C | [DATA_NEEDED: operating temperature range] |
| Compensation | On-chip temperature compensated and calibrated | — |
| Technology | Piezoresistive silicon strain gauge | — |
| Module Dimensions | 7.6 mm x 12.8 mm nominal | — |
| माउंटिंग प्रकार | Through-hole (PCB mount with side-port tubing) | Through-Hole |
| RoHS स्थिति | [DATA_NEEDED: RoHS status not in web data] | [DATA_NEEDED: RoHS status] |
| Maximum Overload Pressure | — | [DATA_NEEDED: maximum overload pressure] |
| Output Voltage Span | — | 0 mV to 35 mV at 3 V excitation |
| Supply Voltage (Excitation) | — | 3 V DC typical |
| Port Configuration | — | Dual male 0.19 in (4.93 mm) tube, axial |
| पैकेज / केस | — | 4-SIP Module |
| Bridge Impedance | — | [DATA_NEEDED: input/output bridge resistance] |
| Linearity | — | [DATA_NEEDED: linearity %FS] |
| Temperature Compensation | — | None (uncompensated) |
| Media Compatibility | — | Dry gases (non-corrosive) |