SN65MLVD200ADR vs DS90C402M Vergleich
Detaillierter Direktvergleich von SN65MLVD200ADR von Texas Instruments und DS90C402M von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
SN65MLVD200ADR - Half-Duplex M-LVDS Transceiver, 8-SOIC | TI
SN65MLVD200ADR ✓ AktivSpezifikationsvergleich
| Parameter | SN65MLVD200ADR | DS90C402M |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Funktion | Half-duplex M-LVDS transceiver (1 driver + 1 receiver) | — |
| Datenrate | Up to 100 Mbps (typical) | — |
| Driver Skew | 700 ps (typical) | — |
| Versorgungsspannung | 3.3 V (typical) | — |
| Output Drive Current | 24 mA (typical) | — |
| ESD Protection (Bus Pins) | ±9 kV HBM | — |
| Common-Mode Range (Receiver) | -1 V to +3.4 V (M-LVDS spec) | — |
| Standards Compliance | TIA/EIA-899 (M-LVDS); TIA/EIA-644 (LVDS reference) | — |
| Betriebstemperatur | -40 °C to +85 °C | — |
| Gehäuse | 8-pin SOIC | 8-lead SOIC |
| Montageart | Surface Mount | Surface mount |
| MSL-Level | [DATA_NEEDED: MSL level] | — |
| Pin-Anzahl | 8 | — |
| RoHS-Status | Compliant | [DATA_NEEDED: RoHS status] |
| Lead-Free | Yes | — |
| Device Type | — | Dual LVDS receiver |
| Receiver Configuration | — | 2 receivers |
| Input Threshold Sensitivity | — | ±100 mV |
| Common-Mode Noise Protection | — | Supported |
| Data-Rate Optimization | — | High data rate |
| Power Optimization | — | Low power |
| Interface Pairing | — | DS90C401 companion device |
| Topologie | — | Dual high-speed point-to-point interface |
| Package Family | — | SOIC surface-mount package family |
| Anzahl der Pins | — | 8 |
| Betriebsversorgungsspannung | — | [DATA_NEEDED: operating supply voltage] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Maximum Data Rate | — | [DATA_NEEDED: maximum data rate] |
| Versorgungsstrom | — | [DATA_NEEDED: supply current] |
| Betriebstemperaturbereich | — | [DATA_NEEDED: operating temperature range] |
| Differential Input Termination | — | [DATA_NEEDED: input termination requirement] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| MSL | — | [DATA_NEEDED: moisture sensitivity level] |