SN65MLVD200ADR vs DS90C402M Comparaison
Comparaison détaillée côte à côte de SN65MLVD200ADR par Texas Instruments et DS90C402M par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
SN65MLVD200ADR - Half-Duplex M-LVDS Transceiver, 8-SOIC | TI
SN65MLVD200ADR ✓ ActifComparaison des spécifications
| Paramètre | SN65MLVD200ADR | DS90C402M |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Fonction | Half-duplex M-LVDS transceiver (1 driver + 1 receiver) | — |
| Débit de données | Up to 100 Mbps (typical) | — |
| Driver Skew | 700 ps (typical) | — |
| Tension d'alimentation | 3.3 V (typical) | — |
| Output Drive Current | 24 mA (typical) | — |
| ESD Protection (Bus Pins) | ±9 kV HBM | — |
| Common-Mode Range (Receiver) | -1 V to +3.4 V (M-LVDS spec) | — |
| Standards Compliance | TIA/EIA-899 (M-LVDS); TIA/EIA-644 (LVDS reference) | — |
| Température de fonctionnement | -40 °C to +85 °C | — |
| Boîtier | 8-pin SOIC | 8-lead SOIC |
| Type de montage | Surface Mount | Surface mount |
| Niveau MSL | [DATA_NEEDED: MSL level] | — |
| Nombre de broches | 8 | — |
| Statut RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Lead-Free | Yes | — |
| Device Type | — | Dual LVDS receiver |
| Receiver Configuration | — | 2 receivers |
| Input Threshold Sensitivity | — | ±100 mV |
| Common-Mode Noise Protection | — | Supported |
| Data-Rate Optimization | — | High data rate |
| Power Optimization | — | Low power |
| Interface Pairing | — | DS90C401 companion device |
| Topologie | — | Dual high-speed point-to-point interface |
| Package Family | — | SOIC surface-mount package family |
| Nombre de broches | — | 8 |
| Tension d'alimentation de fonctionnement | — | [DATA_NEEDED: operating supply voltage] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Maximum Data Rate | — | [DATA_NEEDED: maximum data rate] |
| Courant d'alimentation | — | [DATA_NEEDED: supply current] |
| Plage de température de fonctionnement | — | [DATA_NEEDED: operating temperature range] |
| Differential Input Termination | — | [DATA_NEEDED: input termination requirement] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| MSL | — | [DATA_NEEDED: moisture sensitivity level] |