SN65MLVD200ADR vs DS90C402M Comparação

Comparação detalhada lado a lado de SN65MLVD200ADR por Texas Instruments e DS90C402M por Texas Instruments. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.

Texas Instruments
SN65MLVD200ADR SN65MLVD200ADR - Half-Duplex M-LVDS Transceiver, 8-SOIC | TI

SN65MLVD200ADR - Half-Duplex M-LVDS Transceiver, 8-SOIC | TI

SN65MLVD200ADR ✓ Ativo
Texas Instruments
DS90C402M DS90C402M - Dual LVDS Receiver, ±100 mV | Texas Instruments

DS90C402M - Dual LVDS Receiver, ±100 mV | Texas Instruments

DS90C402M ✓ Ativo

Comparação de especificações

Parâmetro SN65MLVD200ADR DS90C402M
Marca Texas Instruments Texas Instruments
Categoria Interface ICs Interface ICs
Status do ciclo de vida Ativo Ativo
Função Half-duplex M-LVDS transceiver (1 driver + 1 receiver) —
Taxa de dados Up to 100 Mbps (typical) —
Driver Skew 700 ps (typical) —
Tensão de alimentação 3.3 V (typical) —
Output Drive Current 24 mA (typical) —
ESD Protection (Bus Pins) ±9 kV HBM —
Common-Mode Range (Receiver) -1 V to +3.4 V (M-LVDS spec) —
Standards Compliance TIA/EIA-899 (M-LVDS); TIA/EIA-644 (LVDS reference) —
Temperatura de operação -40 °C to +85 °C —
Encapsulamento 8-pin SOIC 8-lead SOIC
Tipo de montagem Surface Mount Surface mount
Nível MSL [DATA_NEEDED: MSL level] —
Contagem de pinos 8 —
Status RoHS Compliant [DATA_NEEDED: RoHS status]
Lead-Free Yes —
Device Type — Dual LVDS receiver
Receiver Configuration — 2 receivers
Input Threshold Sensitivity — ±100 mV
Common-Mode Noise Protection — Supported
Data-Rate Optimization — High data rate
Power Optimization — Low power
Interface Pairing — DS90C401 companion device
Topologia — Dual high-speed point-to-point interface
Package Family — SOIC surface-mount package family
Número de pinos — 8
Tensão de alimentação de operação — [DATA_NEEDED: operating supply voltage]
Propagation Delay — [DATA_NEEDED: propagation delay]
Input Common-Mode Range — [DATA_NEEDED: input common-mode voltage range]
Maximum Data Rate — [DATA_NEEDED: maximum data rate]
Corrente de alimentação — [DATA_NEEDED: supply current]
Faixa de temperatura de operação — [DATA_NEEDED: operating temperature range]
Differential Input Termination — [DATA_NEEDED: input termination requirement]
REACH Status — [DATA_NEEDED: REACH status]
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification]
MSL — [DATA_NEEDED: moisture sensitivity level]

Fichas técnicas e recursos

Ver todos os produtos Criar BOM Solicitar cotação