SN65MLVD200ADR vs DS90C402M Perbandingan

Perbandingan bersamaan detil SN65MLVD200ADR dari Texas Instruments dan DS90C402M dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.

Texas Instruments
SN65MLVD200ADR SN65MLVD200ADR - Half-Duplex M-LVDS Transceiver, 8-SOIC | TI

SN65MLVD200ADR - Half-Duplex M-LVDS Transceiver, 8-SOIC | TI

SN65MLVD200ADR ✓ Aktif
Texas Instruments
DS90C402M DS90C402M - Dual LVDS Receiver, ±100 mV | Texas Instruments

DS90C402M - Dual LVDS Receiver, ±100 mV | Texas Instruments

DS90C402M ✓ Aktif

Perbandingan Spesifikasi

Parameter Umum SN65MLVD200ADR DS90C402M
Merek Texas Instruments Texas Instruments
Kategori Interface ICs Interface ICs
Status Lingkungan Hidup Aktif Aktif
Fungsi Half-duplex M-LVDS transceiver (1 driver + 1 receiver) —
Laju Data Up to 100 Mbps (typical) —
Driver Skew 700 ps (typical) —
Tegangan Pemuat 3.3 V (typical) —
Output Drive Current 24 mA (typical) —
ESD Protection (Bus Pins) ±9 kV HBM —
Common-Mode Range (Receiver) -1 V to +3.4 V (M-LVDS spec) —
Standards Compliance TIA/EIA-899 (M-LVDS); TIA/EIA-644 (LVDS reference) —
Suhu Kerja -40 °C to +85 °C —
Paket 8-pin SOIC 8-lead SOIC
Tipe Mounting Surface Mount Surface mount
Level MSL [DATA_NEEDED: MSL level] —
Jumlah Pin 8 —
Status RoHS Compliant [DATA_NEEDED: RoHS status]
Lead-Free Yes —
Device Type — Dual LVDS receiver
Receiver Configuration — 2 receivers
Input Threshold Sensitivity — ±100 mV
Common-Mode Noise Protection — Supported
Data-Rate Optimization — High data rate
Power Optimization — Low power
Interface Pairing — DS90C401 companion device
Topologi — Dual high-speed point-to-point interface
Package Family — SOIC surface-mount package family
Jumlah Pin — 8
Tegangan Pemuat Kerja — [DATA_NEEDED: operating supply voltage]
Propagation Delay — [DATA_NEEDED: propagation delay]
Input Common-Mode Range — [DATA_NEEDED: input common-mode voltage range]
Maximum Data Rate — [DATA_NEEDED: maximum data rate]
Arus Pemuat — [DATA_NEEDED: supply current]
Rentang Suhu Kerja — [DATA_NEEDED: operating temperature range]
Differential Input Termination — [DATA_NEEDED: input termination requirement]
REACH Status — [DATA_NEEDED: REACH status]
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification]
MSL — [DATA_NEEDED: moisture sensitivity level]

Spek dan Sumber

Buka Semua Produk Buat BOM Ajukan Diskon