STMicroelectronics

LM2904WHYDT - Dual General-Purpose Op Amp | STMicroelectronics

Teilenummer: LM2904WHYDT ✓ Aktiv
Single supply or split supply Vdss 8-SOIC Package Implemented internally Speed
MOQ: 1 |

LM2904WHYDT Übersicht

STMicroelectronics LM2904WHYDT is a dual general-purpose operational amplifier in an 8-pin SOIC package. The device contains two independent, high-gain, internally frequency-compensated amplifiers, enabling one package to provide two signal-conditioning channels. According to the manufacturer product information, it is intended for automotive and industrial control systems and can operate from a single supply or split supply over a wide voltage range. The low-power architecture makes it suitable for battery-operated equipment, instrumentation, sensor interfaces, and general analog control circuits.

An operational amplifier is an analog integrated circuit that amplifies the difference between its inverting and non-inverting inputs. The op-amp category sits within analog signal-chain ICs and serves as a fundamental building block for sensors, filters, buffers, comparators, and closed-loop control systems. The LM2904 family combines internal frequency compensation with two amplifiers in one package, reducing board area compared with separate single-channel devices while preserving independent channels.

The LM2904WHYDT is identified as a standard general-purpose amplifier with two single-ended circuits. Its internally compensated architecture allows operation without an external compensation network in many conventional closed-loop configurations. The device is intended for low-power applications and is particularly useful where a compact, general-purpose dual amplifier is preferable to a high-speed precision amplifier. The exact input offset, bandwidth, output-current, and temperature limits should be confirmed from the manufacturer datasheet before final circuit sign-off.

Two independent channels can implement voltage followers, transimpedance stages, differential amplifiers, active filters, comparators, and motor or actuator-control loops. A common application is conditioning the output of a bridge sensor, potentiometer, or resistive divider before an ADC samples the signal. In automotive systems, the dual format can economize PCB space in body, climate, or powertrain-control modules where multiple low-power analog channels are required.

The SOIC-8 package supports conventional surface-mount assembly and is suitable for lead-free production boards. Place each power pin close to a low-impedance decoupling network and route sensitive input traces away from switching nodes. Because the amplifiers are independent rather than sharing internal signal paths, grounding and supply layout should be designed to minimize channel-to-channel coupling. Verify the exposed operating limits and decoupling recommendations in the manufacturer datasheet for the exact automotive temperature grade.

This page combines the manufacturer listing, distributor package identification, sourcing information, pin-compatible alternatives, and practical analog-design guidance. Use the Request a Quote form for current availability, lead time, and commercial terms, and use the official datasheet for authoritative electrical limits before layout release.

Drop-in-Alternativen für LM2904WHYDT – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit LM2904WHYDT (gleiche Bauform und Footprint) – abweichend in Package, Amplifier Type, Number of Channels, Gain-Bandwidth Product, Input Offset Voltage.

Texas Instruments
Package: SOIC-8 (D)
Number of Channels: 2 (Dual)
Input Offset Voltage: 0.5 mV typical / 3 mV maximum
Vergleichen mit LM2904WHYDT →
Texas Instruments
Package: 8-SOIC (D)
Amplifier Type: General Purpose
Number of Channels: 2
Vergleichen mit LM2904WHYDT →
STMicroelectronics
Package: SOIC-8 (8-SOIC / SOP-8)
Amplifier Type: Standard (General Purpose)
Number of Channels: 2
Vergleichen mit LM2904WHYDT →
Texas Instruments
Amplifier Type: Dual general-purpose operational amplifier
Gain-Bandwidth Product: 700 kHz
Vergleichen mit LM2904WHYDT →

LM2904BIDR

✅ Drop-In
Texas Instruments
📦 SOIC-8
Texas Instruments · Industry-standard dual operational amplifier · 2 (Dual) · 3 V to 36 V · +/-1.5 V to +/-18 V · 1.2 MHz · 0.5 V/us (typical) · 0.5 mV typical / 3 mV maximum

Preis auf Anfrage

Datenblatt ansehen →

LM2904BA

✅ Drop-In
📦 SOIC-8
LM2904-family revision with potentially different offset and temperature specifications; pin and supply compatibility must be confirmed

📋 Referenzalternative (nicht im Katalog)

LM2904D

✅ Drop-In
Texas Instruments
📦 SOIC-8
2 · 3 V to 26 V · ±1.5 V to ±13 V · 700 kHz · 0.3 V/us · 2 mV (typical) · 500 uA (typical) · 0.7 mA (typical)

Preis auf Anfrage

Datenblatt ansehen →

LM2904QDR

✅ Drop-In
Texas Instruments
📦 SOIC-8
Dual general-purpose operational amplifier · 2 circuits · 26 V · 700 kHz · -40 °C to +125 °C · 8-pin SOIC (D) · 8 pins · 4 differential inputs for 2 amplifier channels

Preis auf Anfrage

Datenblatt ansehen →

LM2904DT

✅ Drop-In
STMicroelectronics
📦 SOIC-8
2 · 2 · Standard (General Purpose) · Single-Ended · High gain, internally frequency-compensated · 1.1 MHz · 15 V

Preis auf Anfrage

Datenblatt ansehen →

LM2904WHYDT Grenzwerte & elektrische Eigenschaften

Product Type Dual general-purpose operational amplifier
Number of Amplifiers 2 circuits
Channel Configuration 2 independent single-ended amplifiers
Internal Frequency Compensation Implemented internally
Gehäuse 8-SOIC
Montageart Surface mount
Supply Configuration Single supply or split supply

LM2904WHYDT 8-soic Pinbelegungsleitfaden

Pinbelegung für LM2904WHYDT (8-soic-Gehäuse). Dieses analoge Bauteil verfügt über Eingangs-, Ausgangs- und Versorgungspins. Offset-Null-, Kompensations- und Enable-Pin-Konfigurationen entnehmen Sie dem Herstellerdatenblatt. Ideal für Signalaufbereitung und Verstärkerschaltungen.

Pinbelegungsdiagramm für LM2904WHYDT im 8-soic-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für LM2904WHYDT.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

LM2904WHYDT ist geeignet für 6 Anwendungs: Automotive Sensor Signal Conditioning, Industrial Instrumentation Amplification, Active Audio and Low-Frequency Filters, Battery-Powered Control and Monitor Circuits, Motor Actuator Control Interfaces, Power Supply Feedback and Load Monitoring.

🚗

Automotive Sensor Signal Conditioning

The LM2904WHYDT fits low-power automotive sensing stages that require two independent analog channels in a compact 8-SOIC package. Two amplifiers can condition a bridge or resistive sensor and provide signal buffering or active filtering without adding two separate single-op-amp packages. Its general-purpose internally compensated architecture supports conventional closed-loop analog designs. Before releasing the circuit, verify the exact automotive grade, operating-temperature range, input common-mode limits, output swing, and offset against the manufacturer datasheet. The final selection must also preserve the sensor excitation range and signal-to-error budget.

🏭

Industrial Instrumentation Amplification

The LM2904WHYDT is suitable for industrial instrumentation front ends where two channels must amplify differential sensor signals with limited board area. One channel can perform the differential input stage while the other provides inversion, filtering, or output buffering. The device description identifies automotive and industrial control systems as intended markets and confirms two independent, internally compensated circuits. Check input-bias-current and common-mode requirements against high-impedance transducers, and confirm that output swing and gain-bandwidth product preserve required accuracy and settling behavior.

🎧

Active Audio and Low-Frequency Filters

Two independent LM2904WHYDT channels can form Sallen-Key or multiple-feedback active filters, tone controls, and low-frequency signal shapers. Internal frequency compensation simplifies conventional gain stages, while the dual package reduces component count and PCB area. The amplifier must remain within its input common-mode range, output swing, and gain-bandwidth limits throughout the passband and stopband. Validate stability with the actual source and load impedances, because capacitive loading and high closed-loop gain can affect the usable response even when the nominal pin arrangement is unchanged.

🔋

Battery-Powered Control and Monitor Circuits

The LM2904WHYDT is appropriate for battery-operated monitoring and control electronics that need two low-power amplifier channels without a high-bandwidth device. It can implement a voltage follower for a sensor, a comparator-style threshold stage, or a slow closed-loop control amplifier. Its dual configuration supports channel independence while keeping the external component count low. Verify supply current, input behavior near the lower rail, output swing, and common-mode range under the minimum battery voltage, because these operating conditions determine whether the circuit remains functional at end of discharge.

⚙️

Motor Actuator Control Interfaces

The LM2904WHYDT can serve as an interface in motor and actuator-control systems by buffering command signals, amplifying position-sensor feedback, or conditioning an analog command into a control loop. Two independent channels allow command and feedback paths to be handled in one SOIC-8 device. Its general-purpose architecture is suitable for slow feedback loops rather than demanding motor-drive timing. Confirm output-current capability, output swing, stability with capacitive loads, and supply range, and provide local decoupling and careful routing to prevent switching transients from entering the analog path.

⚡

Power Supply Feedback and Load Monitoring

The LM2904WHYDT can monitor an output rail by buffering the midpoint of a resistor divider and comparing the conditioned level with a reference or ADC input. A second channel can monitor another rail or amplify a current-sense signal. The dual, low-power format makes it useful in compact supply-control and protection modules. Because it is not a precision part by default, calculate the resistor-divider error, amplifier offset, bias-current contribution, and output accuracy. The circuit must also keep the monitored node within the amplifier's input common-mode range at every expected operating condition.

What is the LM2904WHYDT?
The LM2904WHYDT is a dual general-purpose operational amplifier from STMicroelectronics packaged in an 8-SOIC. It contains two independent, high-gain, internally frequency-compensated amplifier circuits. According to the manufacturer product information, the device is designed specifically for automotive and industrial control systems and supports operation from a single supply or split supply over a wide voltage range. Use it for two-channel signal conditioning, filtering, buffering, or control functions.
What are the key specifications of LM2904WHYDT that engineers should know?
The LM2904WHYDT is a dual, internally frequency-compensated general-purpose operational amplifier in an 8-SOIC package. The manufacturer identifies two independent high-gain circuits, single-ended operation, single- or split-supply capability, and low-power supply drain. Exact gain-bandwidth product, offset voltage, input-bias current, output-current capability, supply range, and temperature limits must be taken from the STMicroelectronics datasheet before the amplifier is approved for a production design.
Where can I download the LM2904WHYDT datasheet PDF?
The official STMicroelectronics product page for LM2904WHYDT is available on the ST eStore at https://estore.st.com/en/lm2904whydt-cpn.html. It is the appropriate starting point for the current manufacturer documentation and ordering information. Independent datasheet indexes also mirror the document, but the manufacturer-hosted copy should control when package, revision, or grade details differ. Always verify the pin configuration and electrical limits against the document revision applicable to your order.
Where can I find the LM2904WHYDT pinout?
The LM2904WHYDT uses an 8-SOIC package, and its functional pin assignment should be taken from the pin-configuration drawing in the STMicroelectronics datasheet. The distributor catalog identifies the package as 8-SOIC, but pin names and electrical functions are not printed in the catalog excerpt. During PCB design, use the exact manufacturer drawing to identify both amplifier channels, their input and output pins, and the two supply terminals.
Is LM2904WHYDT suitable for automotive control systems?
The LM2904WHYDT is specifically described by STMicroelectronics for automotive and industrial control systems, so it is a functional fit for low-power automotive signal-conditioning circuitry. Qualification grade, temperature range, and production status must still be confirmed for the exact device before release. The manufacturer product information and datasheet should be used to verify environmental limits, automotive qualification, and any grade-specific test requirements.
What can replace the LM2904WHYDT?
The LM2904WHYDT can be replaced only after confirming the candidate has the same SOIC-8 pin arrangement, supply limits, input/output voltage range, and acceptable DC and AC performance. Compatible parts identified through the LM2904 cross-reference family include other LM2904 devices, but the exact suffix can change temperature grade, shipping form, or qualification. Compare the manufacturer data for every candidate before treating it as a drop-in replacement.
Is the LM2904WHYDT the same as the LM2904D?
The LM2904WHYDT and LM2904D are both members of the general-purpose LM2904 family, but their exact manufacturer, package suffix, grade, and ordering codes must be compared before interchange. The target device is an STMicroelectronics 8-SOIC part, while the cross-reference results identify LM2904D from other manufacturers. Verify pinout, supply voltage, temperature range, offset, bandwidth, and qualification rather than treating the base family name as proof of drop-in equivalence.
What is the best STMicroelectronics equivalent for LM2904WHYDT?
The closest STMicroelectronics alternatives are LM2904-family devices that retain the 8-SOIC footprint and dual-amplifier arrangement, such as LM2904B or LM2904BA when offered in a compatible package. Their key differences can include input-offset performance, supply range, temperature grade, or qualification. The cross-reference results specifically mention LM2904B and LM2904BA as newer family options, but the exact suffix and pin configuration must be confirmed in the manufacturer documentation.
When should I choose LM2904WHYDT instead of another dual op amp?
Choose LM2904WHYDT when a low-power, general-purpose dual amplifier with internal frequency compensation is required for automotive or industrial control circuitry. It is preferable when a familiar SOIC-8 implementation, two independent channels, and single- or split-supply operation are priorities. Select a precision or high-speed alternative only when the application genuinely needs lower offset, wider bandwidth, lower noise, rail-to-rail output, or another performance dimension not promised by the LM2904.
Is LM2904WHYDT suitable for sensor interfaces and signal conditioning?
The LM2904WHYDT is suitable for many low-frequency sensor and signal-conditioning stages because it provides two independent, internally compensated amplifiers. It can buffer potentiometers, amplify small differential signals, or form active filters when its input-offset, bias-current, common-mode, and output-swing specifications satisfy the circuit. Check those limits against the sensor source impedance and required accuracy before selection, especially for high-impedance or precision measurements.
How should I decouple the LM2904WHYDT power supply?
Place the local supply-decoupling capacitor directly beside the LM2904WHYDT supply pin, with a short and low-inductance return path to the ground or reference plane. Follow the capacitor value and layout guidance in the manufacturer datasheet for the operating frequency and supply impedance. Keep both amplifier channels on a stable, quiet ground reference, and route output and feedback paths away from switching-node traces to reduce supply ripple and channel coupling.
What is the difference between LM2904WHYDT and LM2904B?
Both belong to the LM2904 general-purpose dual-amplifier family, but LM2904B may differ from LM2904WHYDT in electrical revision, offset performance, temperature rating, or qualification. The available cross-reference material identifies LM2904B as a newer family option without establishing every exact parameter for this orderable suffix. A drop-in decision therefore requires a parameter-by-parameter comparison of pinout, supply range, offset, bandwidth, bias current, output swing, and temperature limits.
Can an LM2904-family device replace the LM2904WHYDT in a split-supply circuit?
An LM2904-family device can replace the LM2904WHYDT in a split-supply design only if its pinout and electrical limits preserve operation on the positive and negative rails. Confirm input common-mode range, output swing, supply current, stability with the selected load capacitance, and behavior near ground. The manufacturer datasheet is the controlling document; a candidate should not be accepted solely because both devices are labeled dual LM2904 amplifiers.
Where can I buy LM2904WHYDT and check its lead time?
Use the Request a Quote form on this page to request current LM2904WHYDT availability, lead time, and order terms from XAIPART. The manufacturer lists the device for ordering through its eStore, while distributor listings provide additional catalog and sourcing context. Commercial terms can change with quantity and supply status, so obtain a current quotation rather than relying on an archived price when planning production procurement.
What is the price of LM2904WHYDT?
The current commercial price of LM2904WHYDT should be obtained through the Request a Quote form on this page so that quantity, availability, and supply conditions are evaluated together. The structured pricing information on this page is separate from the technical description and is maintained independently for purchasing workflows. For design budgeting, also obtain a formal quotation covering the exact MPN, package suffix, quantity, and required delivery schedule.
Is LM2904WHYDT in stock and what is its lead time?
Current stock and lead time for LM2904WHYDT should be requested through the Request a Quote form on this page. The manufacturer product page accepts orders and distributor catalog pages show the part, but neither catalog representation guarantees the same inventory position or delivery commitment at the time of your request. Include your required quantity, shipment destination, production schedule, and acceptable package suffix so the response reflects the actual procurement requirement.
What design trade-offs should be checked when replacing LM2904WHYDT?
The principal replacement checks are footprint, channel pin assignment, supply range, input common-mode range, output swing, offset voltage, input-bias current, gain-bandwidth product, slew behavior, output-current capability, stability, and temperature qualification. Internal frequency compensation can also affect the usable closed-loop bandwidth and output-capacitance range. Compare the proposed part against the manufacturer datasheet for both devices, then validate the complete analog path because a substitute may alter system noise and offset even when the pin count matches.

Technische Referenzdaten für LM2904WHYDT – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the LM2904WHYDT when the design needs two independent, internally compensated general-purpose amplifier channels in an 8-SOIC package, especially for automotive or industrial signal-conditioning and control functions. Its dual configuration provides a practical balance between board area and channel count without adding the fourth channel of a quad amplifier such as the LM324KAPWR. Consider LM2904B or LM2904BA when their newer electrical revision provides a documented benefit in offset, bandwidth, temperature performance, or qualification. Evaluate LM2904D from NXP Semiconductors when an alternate source is required, and LM2904QDR when its automotive-specific qualification matches the application. None should be treated as an automatic substitute: compare pinout, supply range, input common-mode range, output swing, offset, bias current, bandwidth, stability, and temperature limits. Use the LM2904WHYDT when its manufacturer limits meet the signal integrity and environmental requirements of the finished circuit.

Vergleich mit Alternativen

Parameter Dieses Produkt LM2904B LM2904BA LM2904D LM2904QDR LM2904DT
Brand STMicroelectronics STMicroelectronics STMicroelectronics NXP Semiconductors Texas Instruments STMicroelectronics
Package 8-SOIC SOIC-8 SOIC-8 SOIC-8 SOIC-8 SOIC-8
Amplifier Count 2 circuits 2 circuits 2 circuits 2 circuits 2 circuits 2 circuits
Internal Frequency Compensation Implemented internally Implemented internally Implemented internally Implemented internally Implemented internally Implemented internally
Product Positioning Standard general-purpose dual amplifier Newer LM2904-family dual amplifier Newer LM2904-family dual amplifier General-purpose dual amplifier Automotive-oriented dual amplifier General-purpose dual amplifier
Supply Configuration Single supply or split supply Single supply or split supply Single supply or split supply Single supply or split supply Single supply or split supply Single supply or split supply

Wichtigste Unterscheidungsmerkmale

  • Two independent general-purpose amplifiers in one compact package (vs. LM324KAPWR)
  • Manufacturer positioning for automotive and industrial control systems (vs. LM2904QDR)
  • SOIC-8 dual-amplifier footprint shared across established LM2904 cross-references (vs. LM2904D)

Designhinweise

Place the local bypass capacitor beside the LM2904WHYDT supply connection and provide a short, low-impedance ground return. Select the capacitor and any additional bulk capacitance according to the manufacturer recommendations and the impedance of the upstream supply. Avoid long input and feedback runs, since supply ripple and ground displacement can appear as input-referred error in high-gain analog stages.

Assign one amplifier channel to the most sensitive signal path and keep both channels' feedback loops compact. Route noninverting inputs away from supply, clock, and switching-node copper. If both amplifiers process related signals, maintain symmetrical grounding and avoid routing one channel’s output near the other channel’s input. This reduces channel-to-channel coupling and makes troubleshooting easier.

Do not assume that every device labeled LM2904 is an electrical drop-in replacement. Verify the exact pin assignment, supply range, input common-mode range, output swing, offset voltage, bias current, bandwidth, load stability, and temperature grade. An SOIC-8 footprint alone does not prove equivalent behavior, especially for high-impedance sensors, single-supply operation near ground, or automotive temperature requirements.

For low-frequency filter or amplifier stages, check closed-loop gain against the device gain-bandwidth product and confirm stability with the actual source and load capacitance. Add a small isolation resistor between the amplifier and unusually capacitive loads only after reviewing the manufacturer stability guidance. This is particularly important when driving long cable, sensor, or actuator connections from a general-purpose op amp.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The device is described by STMicroelectronics for automotive and industrial control systems, but grade-specific qualification and environmental declarations must be confirmed in the current manufacturer documentation. The supplied catalog information does not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.

Ähnliche Suchanfragen

LM2904WHYDT datasheet LM2904WHYDT pinout LM2904WHYDT datasheet pdf LM2904WHYDT equivalent LM2904WHYDT replacement LM2904WHYDT cross reference LM2904WHYDT vs LM2904D LM2904WHYDT price LM2904WHYDT stock STMicroelectronics LM2904WHYDT LM2904WHYDT SOIC-8 pinout LM2904WHYDT automotive amplifier

Verwandte Bauteile & Begriffe

STMicroelectronics LM2904WHYDT LM2904B LM2904BA LM2904D LM2904QDR LM2904DT operational amplifier op amp dual op amp general-purpose amplifier analog integrated circuit signal conditioning active filter closed-loop control internally frequency-compensated amplifier single supply split supply low-dropout automotive control systems industrial control systems 8-SOIC SOIC package surface mount SMD
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen