MPC885CZP133 - 133MHz PowerQUICC MPU, 357-PBGA | NXP
Teilenummer: MPC885CZP133 ✗ Abgekündigt| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $42.5 | $42,50 |
| 10 | $39.2 | $392,00 |
| 100 | $35.75 | $3.575,00 |
| 500 | $31.4 | $15.700,00 |
| 1.000 | $28.95 | $28.950,00 |
MPC885CZP133 Übersicht
A PowerQUICC (Power Architecture with Communications) processor is a class of integrated microprocessor that combines a general-purpose CPU core with a separate RISC-based communications engine on a single die. It sits within the broader hierarchy: microprocessor -> embedded MPU -> PowerQUICC -> communications processor -> Power Architecture technology. This integration reduces system bill-of-materials and enables deterministic handling of multiple serial channels simultaneously, which is essential in routers, switches, and access multiplexers where the CPU alone cannot service the sustained interrupt load of TDM and packet traffic.
Key differentiating features include the on-chip CPM with separate RISC engine, dual 8 KB instruction/data caches, a powerful memory controller supporting DRAM, SRAM, Flash, and PCMCIA, integrated security engine, and multiple serial communication controllers (SCCs, SMCs) for HDLC/SDLC, UART, BISYNC, SPI, and I2C. The MPC885 is the superset device of the MPC880/MPC885 family, with the 'CZ' suffix denoting the 357-PBGA package and '133' indicating the 133 MHz core speed grade.
The architecture integrates the PowerPC 8xx core with a 32-bit data path, hardware multiply/divide, and four instruction units. The CPM operates at a configurable baud-rate generator clock and supports up to eight serial channels concurrently, offloading the core. Internal 32-bit address bus, 32-bit data bus, and dedicated PCMCIA/USB interfaces make the device suitable for integrated access platforms and customer-premises equipment.
Typical applications include networked routers, DSLAM line cards, ISDN terminal adapters, T1/E1 multiplexers, and industrial control with serial-intensive I/O. The wide peripheral set also fits customer-premises gateways, set-top boxes, and embedded Linux appliances that require deterministic serial handling.
When designing with this part, ensure a stable 1.8V supply with bulk decoupling near the BGA, follow NXP AN2130 PCB layout guidelines for 357-PBGA fan-out, and verify JTAG access before board bring-up. The 357-BGA package demands at least four routing layers; plan stack-up and via-in-pad early.
This page consolidates distributor pricing, drop-in alternatives in the same 357-PBGA footprint, and practical design notes not assembled in any single manufacturer document.
Drop-in-Alternativen für MPC885CZP133 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit MPC885CZP133 (gleiche Bauform und Footprint) – abweichend in Core Architecture, Package, Operating Temperature, Communications Processor Module (CPM), Manufacturer.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
MPC885VR133
✅ Drop-In✓ Auf Lager
$27.4 / Stück
Datenblatt ansehen →MPC885ZP133
✅ Drop-In✓ Auf Lager
$16.25 / Stück
Datenblatt ansehen →MPC880CVR133
✅ Drop-In✓ Auf Lager
$32.1 / Stück
Datenblatt ansehen →MPC880VR133
✅ Drop-In✓ Auf Lager
$19.45 / Stück
Datenblatt ansehen →MPC875ZT133
✅ Drop-In✓ Auf Lager
$19.85 / Stück
Datenblatt ansehen →MPC885CZP133 Grenzwerte & elektrische Eigenschaften
| Core Architecture | Power Architecture (PowerPC 8xx) |
| Core Frequency | 133 MHz |
| Datenbusbreite | 32-bit |
| Address Bus Width | 32-bit |
| Instruction Cache | 8 KB |
| Data Cache | 8 KB |
| Core Supply Voltage | 1.7 V to 1.9 V |
| Betriebstemperatur | -40C to +100C |
| Gehäuse | 357-PBGA (25x25 mm) |
| Pin-Anzahl | 357 |
| Montageart | Surface Mount |
| Communications Processor Module (CPM) | Yes, integrated with separate RISC engine |
| On-chip Security Engine | Yes |
| Memory Controller | DRAM, SRAM, Flash, PCMCIA |
| Serial Channels | Multiple SCCs/SMCs (HDLC, UART, SPI, I2C) |
| Family | PowerQUICC MPC880/MPC885 |
MPC885CZP133 357-pbga (25x25 mm) Pinbelegungsleitfaden
Pinbelegung für MPC885CZP133 (357-pbga (25x25 mm)-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für MPC885CZP133.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
MPC885CZP133 ist geeignet für 6 Anwendungs: Telecom DSLAM Line Card, Industrial Router / Edge Gateway, ISDN Terminal Adapter, T1/E1 Multiplexer, Set-Top Box / Media Gateway, Embedded Industrial Control with Serial I/O.
Telecom DSLAM Line Card
The MPC885CZP133 fits DSLAM line-card applications because its on-chip CPM offload engine handles multiple HDLC/SDLC and PPP-over-ATM channels without burdening the main core. The 133 MHz PowerPC core plus CPM can sustain several T1/E1 ports concurrently, with the integrated 32-bit memory controller feeding ATM SAR ASICs. Its 357-PBGA package supports fan-out for the multi-port serial bus typical of DSLAM architectures, while -40C to +100C temperature rating fits central-office deployments.
Empfohlen
Industrial Router / Edge Gateway
In industrial router and edge-gateway designs, the MPC885CZP133 provides deterministic serial handling for cellular modems, GPS, and fieldbuses alongside the main TCP/IP stack. The CPM's separate RISC engine manages SCCs running HDLC and UART protocols in parallel, freeing the 133 MHz core for routing, firewall, and VPN services. The 1.7V-1.9V core supply plus 3.3V I/O is well-supported by industrial-grade power trees. The 357-PBGA package ensures robust mechanical and thermal performance for industrial enclosures.
Empfohlen
ISDN Terminal Adapter
The MPC885CZP133 is well-suited to ISDN terminal adapters that must terminate multiple BRI/PRI channels while presenting Ethernet/IP services to the LAN. The integrated SCCs run HDLC framing for ISDN D-channel signaling at the full 133 MHz throughput, while the CPM offload engine handles time-critical channel-associated signalling without jitter. The 357-PBGA footprint fits compact S/T or U-interface termination cards, and the -40C to +100C range covers customer-premises environments.
Empfohlen
T1/E1 Multiplexer
In T1/E1 multiplexer designs, the MPC885CZP133 terminates multiple T1/E1 trunks and demultiplexes channels onto a backplane. The CPM's separate RISC processor handles per-channel bit manipulation and HDLC encapsulation at line rate, eliminating an external framer ASIC in many designs. With up to 8 SCCs plus several SMCs, the device can sustain 4-8 T1/E1 ports simultaneously at full 133 MHz core throughput. Its 32-bit memory bus supports burst-mode DMA into external SSRAM for jitter buffers.
Empfohlen
Set-Top Box / Media Gateway
The MPC885CZP133 powers set-top boxes and residential media gateways that require MPEG transport-stream demultiplexing alongside Ethernet/IP and USB interfaces. Its 133 MHz PowerPC core can run embedded Linux with adequate headroom for HTTP/UPnP service stacks, while the CPM offloads the smart-card and IR control channels. The 357-PBGA package offers the thermal and routing headroom needed for consumer-premises equipment with constrained board area.
Empfohlen
Embedded Industrial Control with Serial I/O
The MPC885CZP133 fits industrial control applications where deterministic multi-drop serial comms (RS-485 Modbus, Profibus, CAN bridging) coexist with TCP/IP management. The CPM RISC engine runs SCC channels as Modbus masters or slaves in parallel while the core processes control logic. Industrial-grade -40C to +100C rating plus the 357-PBGA mechanical robustness suit factory-floor enclosures. Memory controller supports both battery-backed SRAM for deterministic state retention and DRAM for Linux runtime.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für MPC885CZP133 – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | MPC885VR133 | MPC885ZP133 | MPC880CVR133 | MPC880VR133 | MPC875ZT133 |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 357-PBGA (25x25) | 357-PBGA (25x25) | 357-PBGA (25x25) | 357-PBGA (25x25) | 357-PBGA (25x25) | 357-PBGA (25x25) |
| Core Frequency | 133 MHz | 133 MHz | 133 MHz | 133 MHz | 133 MHz | 133 MHz |
| Operating Temperature | -40C to +100C | -40C to +100C | -40C to +100C | -40C to +100C | -40C to +100C | -40C to +100C |
| On-chip Security Engine | Yes | Yes | Reduced | Reduced | Reduced | Reduced |
| Lifecycle Status | NRND | NRND | NRND | NRND | NRND | NRND |
Wichtigste Unterscheidungsmerkmale
- Full on-chip security engine included (vs. MPC880CVR133)
- Maximum CPM peripheral count in the 357-PBGA family (vs. MPC880VR133)
- Superset device of MPC8xx family (vs. MPC875ZT133)
Designhinweise
The 357-PBGA at 1.27 mm pitch requires at least 4 PCB layers for fan-out escape routing, with via-in-pad recommended for inner rows. Place 1.0 uF 0402 decoupling caps within 4 mm of every 8-10 BGA balls, plus 10 uF bulk capacitors at each supply island. Reference NXP application note AN2130 'Design Considerations for BGA Packages' for the recommended stack-up and trace-width rules. The exposed die paddle must be soldered to a continuous ground pad for thermal dissipation; thermal vias to inner ground planes are mandatory.
Provide a 1.8V core supply (1.7V-1.9V range, 1.5A typical load) and a 3.3V I/O supply (0.5A typical). Both rails must ramp together within the sequencing window specified in the hardware specifications datasheet to avoid latch-up. The PLL analog supply (1.8V_AVDD) must be ferrite-filtered from the digital core supply to reduce jitter. Estimated: at 133 MHz full operation, core current draw is ~0.8A; budget 1.2A peak.
Do not confuse the MPC885CZP133 (357-PBGA) with the MPC885CVR133 (different package) when ordering or laying out the PCB - the part number suffix 'CZ' denotes the 357-PBGA package specifically. Verify JTAG access through the standard 14-pin COP header during board bring-up before depopulating BGA rework stock. The CPM RISC engine requires separate firmware initialization in addition to the main core boot; missing this step leaves serial channels silent.
Compliance-Informationen
RoHS, lead-free, halogen-free status not confirmed in verified web data; consult NXP product compliance letter for current certificate. AEC-Q100 not applicable (industrial/telecom MPU, not automotive).
