SP485R vs SP485RCP-L Comparación
Comparación detallada lado a lado de SP485R por MaxLinear y SP485RCP-L por MaxLinear. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | SP485R | SP485RCP-L |
|---|---|---|
| Marca | MaxLinear | MaxLinear |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Función | Transceiver | — |
| Protocol | RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half | — |
| Receiver Hysteresis | [DATA_NEEDED: receiver hysteresis mV] | — |
| Velocidad de datos | 5 Mbps | — |
| Tensión de alimentación | 4.75 V to 5.25 V | 5.25 V |
| Temperatura de funcionamiento | [DATA_NEEDED: operating temperature range C] | — |
| Receiver Input Impedance (RIN) | 120 kOhm minimum, 150 kOhm typical (1/10 unit load) | — |
| Bus Loading | 1/10 unit load (supports 400+ transceivers on bus) | — |
| Input Sensitivity | +/-200 mV | — |
| Common-Mode Input Voltage Range | -7 V to +12 V | — |
| Shutdown Mode | Yes | — |
| Encapsulado | 8-pin narrow SOIC (SOIC-8) or 8-pin PDIP | 8-pin PDIP |
| Tipo de montaje | Surface Mount (SOIC) / Through-Hole (PDIP) | Through-hole |
| Pin-to-Pin Equivalent | SP485 (with higher RIN) | — |
| Estado RoHS | [DATA_NEEDED: rohs status] | [DATA_NEEDED: RoHS status] |
| Product Type | — | RS-422/RS-485 transceiver |
| Transceiver Configuration | — | 1 driver / 1 receiver |
| Duplex Mode | — | Half-duplex |
| Supported Standards | — | RS-422 and RS-485 |
| Maximum Data Rate | — | 1000 kbps |
| Rango de temperatura de funcionamiento | — | 0°C to 70°C |
| Driver Count | — | 1 |
| Receiver Count | — | 1 |
| Operating Supply Current | — | [DATA_NEEDED: operating supply current] |
| Corriente en reposo | — | [DATA_NEEDED: quiescent current] |
| Corriente de apagado | — | [DATA_NEEDED: shutdown current] |
| Receiver Input Sensitivity | — | [DATA_NEEDED: receiver input sensitivity] |
| Common-Mode Voltage Range | — | [DATA_NEEDED: common-mode voltage range] |
| Driver Output Voltage | — | [DATA_NEEDED: driver output voltage] |
| ESD Protection | — | [DATA_NEEDED: ESD protection rating] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |