SP485R vs SP485RCP-L Comparaison
Comparaison détaillée côte à côte de SP485R par MaxLinear et SP485RCP-L par MaxLinear. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | SP485R | SP485RCP-L |
|---|---|---|
| Marque | MaxLinear | MaxLinear |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Fonction | Transceiver | — |
| Protocol | RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half | — |
| Receiver Hysteresis | [DATA_NEEDED: receiver hysteresis mV] | — |
| Débit de données | 5 Mbps | — |
| Tension d'alimentation | 4.75 V to 5.25 V | 5.25 V |
| Température de fonctionnement | [DATA_NEEDED: operating temperature range C] | — |
| Receiver Input Impedance (RIN) | 120 kOhm minimum, 150 kOhm typical (1/10 unit load) | — |
| Bus Loading | 1/10 unit load (supports 400+ transceivers on bus) | — |
| Input Sensitivity | +/-200 mV | — |
| Common-Mode Input Voltage Range | -7 V to +12 V | — |
| Shutdown Mode | Yes | — |
| Boîtier | 8-pin narrow SOIC (SOIC-8) or 8-pin PDIP | 8-pin PDIP |
| Type de montage | Surface Mount (SOIC) / Through-Hole (PDIP) | Through-hole |
| Pin-to-Pin Equivalent | SP485 (with higher RIN) | — |
| Statut RoHS | [DATA_NEEDED: rohs status] | [DATA_NEEDED: RoHS status] |
| Product Type | — | RS-422/RS-485 transceiver |
| Transceiver Configuration | — | 1 driver / 1 receiver |
| Duplex Mode | — | Half-duplex |
| Supported Standards | — | RS-422 and RS-485 |
| Maximum Data Rate | — | 1000 kbps |
| Plage de température de fonctionnement | — | 0°C to 70°C |
| Driver Count | — | 1 |
| Receiver Count | — | 1 |
| Operating Supply Current | — | [DATA_NEEDED: operating supply current] |
| Courant de repos | — | [DATA_NEEDED: quiescent current] |
| Courant d'arrêt | — | [DATA_NEEDED: shutdown current] |
| Receiver Input Sensitivity | — | [DATA_NEEDED: receiver input sensitivity] |
| Common-Mode Voltage Range | — | [DATA_NEEDED: common-mode voltage range] |
| Driver Output Voltage | — | [DATA_NEEDED: driver output voltage] |
| ESD Protection | — | [DATA_NEEDED: ESD protection rating] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |