SP485R vs SP485RCP-L Perbandingan

Perbandingan bersamaan detil SP485R dari MaxLinear dan SP485RCP-L dari MaxLinear. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.

Perbandingan Spesifikasi

Parameter Umum SP485R SP485RCP-L
Merek MaxLinear MaxLinear
Kategori Interface ICs Interface ICs
Status Lingkungan Hidup Aktif Aktif
Fungsi Transceiver —
Protocol RS-485 —
Number of Drivers/Receivers 1/1 —
Duplex Half —
Receiver Hysteresis [DATA_NEEDED: receiver hysteresis mV] —
Laju Data 5 Mbps —
Tegangan Pemuat 4.75 V to 5.25 V 5.25 V
Suhu Kerja [DATA_NEEDED: operating temperature range C] —
Receiver Input Impedance (RIN) 120 kOhm minimum, 150 kOhm typical (1/10 unit load) —
Bus Loading 1/10 unit load (supports 400+ transceivers on bus) —
Input Sensitivity +/-200 mV —
Common-Mode Input Voltage Range -7 V to +12 V —
Shutdown Mode Yes —
Paket 8-pin narrow SOIC (SOIC-8) or 8-pin PDIP 8-pin PDIP
Tipe Mounting Surface Mount (SOIC) / Through-Hole (PDIP) Through-hole
Pin-to-Pin Equivalent SP485 (with higher RIN) —
Status RoHS [DATA_NEEDED: rohs status] [DATA_NEEDED: RoHS status]
Product Type — RS-422/RS-485 transceiver
Transceiver Configuration — 1 driver / 1 receiver
Duplex Mode — Half-duplex
Supported Standards — RS-422 and RS-485
Maximum Data Rate — 1000 kbps
Rentang Suhu Kerja — 0°C to 70°C
Driver Count — 1
Receiver Count — 1
Operating Supply Current — [DATA_NEEDED: operating supply current]
Arus Memerintah — [DATA_NEEDED: quiescent current]
Arus Menutup — [DATA_NEEDED: shutdown current]
Receiver Input Sensitivity — [DATA_NEEDED: receiver input sensitivity]
Common-Mode Voltage Range — [DATA_NEEDED: common-mode voltage range]
Driver Output Voltage — [DATA_NEEDED: driver output voltage]
ESD Protection — [DATA_NEEDED: ESD protection rating]
REACH Status — [DATA_NEEDED: REACH status]
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification]

Spek dan Sumber

Buka Semua Produk Buat BOM Ajukan Diskon