SP485R vs SP485RCP-L 비교

다음의 상세 나란히 비교: SP485R 제조: MaxLinear 및 SP485RCP-L 제조: MaxLinear. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.

MaxLinear
SP485RCP-L SP485RCP-L - 1 Mbps RS-485 Transceiver | MaxLinear

SP485RCP-L - 1 Mbps RS-485 Transceiver | MaxLinear

SP485RCP-L ✓ 활성

사양 비교

파라미터 SP485R SP485RCP-L
브랜드 MaxLinear MaxLinear
카테고리 Interface ICs Interface ICs
수명 주기 상태 활성 활성
기능 Transceiver —
Protocol RS-485 —
Number of Drivers/Receivers 1/1 —
Duplex Half —
Receiver Hysteresis [DATA_NEEDED: receiver hysteresis mV] —
데이터 속도 5 Mbps —
공급 전압 4.75 V to 5.25 V 5.25 V
동작 온도 [DATA_NEEDED: operating temperature range C] —
Receiver Input Impedance (RIN) 120 kOhm minimum, 150 kOhm typical (1/10 unit load) —
Bus Loading 1/10 unit load (supports 400+ transceivers on bus) —
Input Sensitivity +/-200 mV —
Common-Mode Input Voltage Range -7 V to +12 V —
Shutdown Mode Yes —
패키지 8-pin narrow SOIC (SOIC-8) or 8-pin PDIP 8-pin PDIP
실장 유형 Surface Mount (SOIC) / Through-Hole (PDIP) Through-hole
Pin-to-Pin Equivalent SP485 (with higher RIN) —
RoHS 상태 [DATA_NEEDED: rohs status] [DATA_NEEDED: RoHS status]
Product Type — RS-422/RS-485 transceiver
Transceiver Configuration — 1 driver / 1 receiver
Duplex Mode — Half-duplex
Supported Standards — RS-422 and RS-485
Maximum Data Rate — 1000 kbps
동작 온도 범위 — 0°C to 70°C
Driver Count — 1
Receiver Count — 1
Operating Supply Current — [DATA_NEEDED: operating supply current]
대기 전류 — [DATA_NEEDED: quiescent current]
셧다운 전류 — [DATA_NEEDED: shutdown current]
Receiver Input Sensitivity — [DATA_NEEDED: receiver input sensitivity]
Common-Mode Voltage Range — [DATA_NEEDED: common-mode voltage range]
Driver Output Voltage — [DATA_NEEDED: driver output voltage]
ESD Protection — [DATA_NEEDED: ESD protection rating]
REACH Status — [DATA_NEEDED: REACH status]
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification]

데이터시트 & 자료

모든 제품 보기 BOM 생성 견적 요청