SP485R vs SP485RCP-L 比較

詳細な並列比較: SP485R メーカー: MaxLinear および SP485RCP-L メーカー: MaxLinear。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。

MaxLinear
SP485RCP-L SP485RCP-L - 1 Mbps RS-485 Transceiver | MaxLinear

SP485RCP-L - 1 Mbps RS-485 Transceiver | MaxLinear

SP485RCP-L ✓ 生産中

仕様比較

パラメータ SP485R SP485RCP-L
ブランド MaxLinear MaxLinear
カテゴリ Interface ICs Interface ICs
ライフサイクル状態 有効 有効
機能 Transceiver —
Protocol RS-485 —
Number of Drivers/Receivers 1/1 —
Duplex Half —
Receiver Hysteresis [DATA_NEEDED: receiver hysteresis mV] —
データレート 5 Mbps —
電源電圧 4.75 V to 5.25 V 5.25 V
動作温度 [DATA_NEEDED: operating temperature range C] —
Receiver Input Impedance (RIN) 120 kOhm minimum, 150 kOhm typical (1/10 unit load) —
Bus Loading 1/10 unit load (supports 400+ transceivers on bus) —
Input Sensitivity +/-200 mV —
Common-Mode Input Voltage Range -7 V to +12 V —
Shutdown Mode Yes —
パッケージ 8-pin narrow SOIC (SOIC-8) or 8-pin PDIP 8-pin PDIP
実装タイプ Surface Mount (SOIC) / Through-Hole (PDIP) Through-hole
Pin-to-Pin Equivalent SP485 (with higher RIN) —
RoHS ステータス [DATA_NEEDED: rohs status] [DATA_NEEDED: RoHS status]
Product Type — RS-422/RS-485 transceiver
Transceiver Configuration — 1 driver / 1 receiver
Duplex Mode — Half-duplex
Supported Standards — RS-422 and RS-485
Maximum Data Rate — 1000 kbps
動作温度範囲 — 0°C to 70°C
Driver Count — 1
Receiver Count — 1
Operating Supply Current — [DATA_NEEDED: operating supply current]
静止電流 — [DATA_NEEDED: quiescent current]
シャットダウン電流 — [DATA_NEEDED: shutdown current]
Receiver Input Sensitivity — [DATA_NEEDED: receiver input sensitivity]
Common-Mode Voltage Range — [DATA_NEEDED: common-mode voltage range]
Driver Output Voltage — [DATA_NEEDED: driver output voltage]
ESD Protection — [DATA_NEEDED: ESD protection rating]
REACH Status — [DATA_NEEDED: REACH status]
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification]

データシート&リソース

すべての製品を閲覧 BOMを作成 見積もり依頼