SP485R vs SP485RCP-L 比較

詳細並排比較 SP485R 由 MaxLinear 與 SP485RCP-L 由 MaxLinear. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。

MaxLinear
SP485RCP-L SP485RCP-L - 1 Mbps RS-485 Transceiver | MaxLinear

SP485RCP-L - 1 Mbps RS-485 Transceiver | MaxLinear

SP485RCP-L ✓ 啟用中

規格比較

參數 SP485R SP485RCP-L
品牌 MaxLinear MaxLinear
類別 Interface ICs Interface ICs
生命週期狀態 啟用中 啟用中
功能 Transceiver —
Protocol RS-485 —
Number of Drivers/Receivers 1/1 —
Duplex Half —
Receiver Hysteresis [DATA_NEEDED: receiver hysteresis mV] —
資料速率 5 Mbps —
供應電壓 4.75 V to 5.25 V 5.25 V
工作溫度 [DATA_NEEDED: operating temperature range C] —
Receiver Input Impedance (RIN) 120 kOhm minimum, 150 kOhm typical (1/10 unit load) —
Bus Loading 1/10 unit load (supports 400+ transceivers on bus) —
Input Sensitivity +/-200 mV —
Common-Mode Input Voltage Range -7 V to +12 V —
Shutdown Mode Yes —
封裝 8-pin narrow SOIC (SOIC-8) or 8-pin PDIP 8-pin PDIP
安裝類型 Surface Mount (SOIC) / Through-Hole (PDIP) Through-hole
Pin-to-Pin Equivalent SP485 (with higher RIN) —
RoHS 狀態 [DATA_NEEDED: rohs status] [DATA_NEEDED: RoHS status]
Product Type — RS-422/RS-485 transceiver
Transceiver Configuration — 1 driver / 1 receiver
Duplex Mode — Half-duplex
Supported Standards — RS-422 and RS-485
Maximum Data Rate — 1000 kbps
工作溫度範圍 — 0°C to 70°C
Driver Count — 1
Receiver Count — 1
Operating Supply Current — [DATA_NEEDED: operating supply current]
靜態電流 — [DATA_NEEDED: quiescent current]
關機電流 — [DATA_NEEDED: shutdown current]
Receiver Input Sensitivity — [DATA_NEEDED: receiver input sensitivity]
Common-Mode Voltage Range — [DATA_NEEDED: common-mode voltage range]
Driver Output Voltage — [DATA_NEEDED: driver output voltage]
ESD Protection — [DATA_NEEDED: ESD protection rating]
REACH Status — [DATA_NEEDED: REACH status]
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification]

資料表與資源

瀏覽所有產品 建立 BOM 索取報價