EP1810GC-35AB - Classic EPLD, 48 Macrocells, 35ns | Altera
N.º de pieza: EP1810GC-35AB ✗ Fin de vida| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $18.5 | $18,50 |
| 10 | $16.2 | $162,00 |
| 100 | $13.95 | $1.395,00 |
| 500 | $11.8 | $5.900,00 |
| 1.000 | $9.95 | $9.950,00 |
EP1810GC-35AB Descripción general
What is an EPLD? An EPLD (Erasable Programmable Logic Device) is a type of programmable logic device that uses EPROM or EEPROM cells to store the configuration, allowing the device to be erased with ultraviolet light and reprogrammed. EPLDs sit in the broader programmable logic hierarchy: programmable logic -> EPLD -> CPLD -> programmable logic IC -> semiconductor. They offer predictable timing, deterministic pin-to-pin delays, and are typically used as "glue logic" to replace multiple discrete SSI/MSI logic gates, providing design flexibility without the complexity of an FPGA.
Key features of the EP1810GC-35AB include 48 macrocells, 12 dedicated input pins, 48 I/O pins, a maximum propagation delay (tPD) of 35 ns, and a maximum toggle frequency of 62.5 MHz. The device is fabricated on a low-power CMOS EPROM process, supports in-system programmability via a JTAG-like interface, and retains its configuration for at least 10 years. The ceramic PGA package provides robust thermal performance suitable for industrial and military temperature grades.
From an architectural standpoint, the EP1810GC-35AB uses a sum-of-products architecture with a programmable AND/OR array feeding output macrocells. Each macrocell contains a flip-flop and programmable I/O controls for registered, combinational, or bidirectional operation. The device includes a global clock network, asynchronous clear, and output enable controls, enabling the implementation of complex state machines and interface logic.
Typical applications include high-speed bus decoding, address mapping in 8-bit and 16-bit microprocessor systems, state-machine implementation, glue-logic replacement for multiple 74LS/74F-series TTL gates, and industrial control systems. The Classic EPLD family is also widely used in legacy telecom infrastructure, military/aerospace systems, and test equipment where long-term lifecycle support and known-good silicon are essential.
When designing with the EP1810GC-35AB, note that this device is part of an obsolete product line; engineers should verify long-term availability with authorized distributors or consider modern Altera/Intel MAX series CPLDs as a redesign path. The ceramic PGA package requires a socket or careful PCB layout for the through-hole pin array.
Alternativas directas para EP1810GC-35AB — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con EP1810GC-35AB (mismo factor de forma y huella) — difiere en Mounting Type, Package, Operating Temperature, Technology, Process Technology.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
EP1810GC-35
✅ Sustitución directa✓ En stock
$177.12 / unidad
Ver hoja de datos →EP1810GC-50
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
EP1810GM-35
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
EP1810GC-30
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
EP1810GC-35AB Valores máximos y características eléctricas
| Product Family | Classic EPLD |
| Technology | CMOS EPROM |
| Number of Macrocells | 48 |
| Number of Usable Gates | 1200 |
| Maximum Inputs | 64 |
| Maximum Outputs | 48 |
| Number of I/O Pins | 48 |
| Dedicated Input Pins | 12 |
| Propagation Delay (tPD) | 35 ns |
| Maximum Toggle Frequency | 62.5 MHz |
| Supply Voltage (VCC) | 5 V |
| Package Type | Pin Grid Array (PGA), ceramic |
| Programming Method | UV-erasable EPROM, in-system via JTAG-like interface |
| Estado RoHS | unknown |
Guía de configuración de pines de EP1810GC-35AB pin grid array (pga), ceramic
Configuración de pines para EP1810GC-35AB (encapsulado pin grid array (pga), ceramic). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para EP1810GC-35AB.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
EP1810GC-35AB es adecuado para 6 aplicacións: Microprocessor Bus Decoding and Address Mapping, State Machine Implementation in Industrial Control, Legacy Telecom Interface and Glue Logic, Military and Aerospace Avionics Systems, Test and Measurement Equipment Front-End, Replacement of Multiple 74LS/74F TTL Gates.
Microprocessor Bus Decoding and Address Mapping
The EP1810GC-35AB's 48 macrocells and 12 dedicated input pins make it ideally suited for decoding 16-bit microprocessor address buses and generating chip-select signals for memory and peripheral mapping. With a 35 ns tPD, the device comfortably meets the address-to-chip-select timing budgets of 8 MHz to 25 MHz microprocessors (e.g., 8086, 68000, Z80) where the address latch-to-CS window is typically 40-60 ns. The deterministic AND/OR-array delay is preferable to discrete 74LS138/139 decoder trees because it allows late-stage board revisions without trace-by-trace timing re-validation. In legacy industrial PCs and embedded controllers, the EP1810GC-35AB often replaces 4-6 TTL packages, reducing board area and improving noise margin.
Recomendado
State Machine Implementation in Industrial Control
The EP1810GC-35AB's 48 flip-flop-equipped macrocells provide ample register capacity for implementing multi-state finite state machines (FSMs) in industrial control and instrumentation equipment. Each macrocell supports registered, combinational, or bidirectional I/O with asynchronous clear and global clock, enabling clean Moore/Mealy state machines with deterministic 35 ns state-transition latency. The ceramic PGA package delivers the thermal headroom required for sealed industrial enclosures operating at elevated ambient temperatures. Designers can encode 16-32 state machines within a single device, with the remaining macrocells dedicated to input conditioning, debouncing, and output latching for relay drivers.
Recomendado
Legacy Telecom Interface and Glue Logic
The EP1810GC-35AB is widely deployed in legacy telecom infrastructure (e.g., T1/E1 framers, DSLAM line cards, cross-connect switches) as glue logic between protocol controllers, PHYs, and backplane transceivers. Its 48 I/O pins and 64-input AND/OR array allow it to absorb 4-8 discrete 74F/74AS TTL packages per device, simplifying board layout and reducing propagation-delay skew. The 35 ns tPD is well-matched to the 8.192 MHz PCM frame-clock domain typical of T1/E1 systems. Long-term supply via Rochester Electronics makes the EP1810GC-35AB a viable sustainment solution for telecom carriers required to maintain 20-30 year field-life equipment.
Recomendado
Military and Aerospace Avionics Systems
The ceramic PGA package of the EP1810GC-35AB (-GM military-grade variant) supports the extended temperature range (-55C to +125C) and mechanical ruggedness required for military and aerospace applications. The device is used in legacy avionics bus interfaces (e.g., MIL-STD-1553, ARINC 429), radar signal conditioning, and flight-control redundant logic. The EPROM technology provides radiation tolerance for space applications and secure field-programmable configurations for cryptographic equipment. Long-term die-bank inventory at Rochester Electronics ensures continued supply for sustainment programs with 20+ year field-life requirements.
Recomendado
Test and Measurement Equipment Front-End
The EP1810GC-35AB's deterministic timing and 48 I/O pins make it useful for digital test equipment, logic analyzers, and protocol analyzers where precise pattern generation, handshaking, and trigger sequencing are required. The 35 ns tPD allows accurate generation of test patterns at frequencies up to 28 MHz, and the 48 macrocells can be partitioned into independent timing generators, pattern sequencers, and handshake state machines. The ceramic PGA package and 5 V VCC also simplify integration with TTL-compatible front-end circuits common in older instrument designs.
Recomendado
Replacement of Multiple 74LS/74F TTL Gates
The EP1810GC-35AB is commonly used to consolidate 4-8 packages of 74LS, 74F, 74ALS, or 74AS discrete TTL logic into a single programmable device, reducing PCB area, power consumption, and inventory burden. Each Classic EPLD macrocell can replace a 74LS00 quad NAND, 74LS151 8:1 mux, 74LS153 dual 4:1 mux, or 74LS161 counter when configured appropriately. The 48-macrocell density enables replacement of an entire 74LS244/245/373/374 buffer tree plus decoder logic. Designers benefit from late-stage design changes without board respins, a key advantage over fixed-function TTL.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para EP1810GC-35AB — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | EP1810GC-35 | EP1810GC-30 | EP1810GC-50 | EP1810GM-35 |
|---|---|---|---|---|---|
| Brand | Altera | Altera | Altera | Altera | Altera |
| Package | PGA (ceramic) | PGA (ceramic) - same | PGA (ceramic) - same | PGA (ceramic) - same | PGA (ceramic) - same |
| Propagation Delay (tPD) | 35 ns | 35 ns | 30 ns | 50 ns | 35 ns |
| Macrocells | 48 | 48 | 48 | 48 | 48 |
| Usable Gates | 1200 | 1200 | 1200 | 1200 | 1200 |
| Temperature Grade | Commercial | Commercial | Commercial | Commercial | Military (-55C to +125C) |
| Technology | CMOS EPROM | CMOS EPROM | CMOS EPROM | CMOS EPROM | CMOS EPROM |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete (military) |
Diferenciadores clave
- Same silicon die as EP1810GC-35 with AB suffix revision (frente a EP1810GC-35)
- Faster propagation delay available in same package (frente a EP1810GC-50)
- Military-grade variant available for harsh environments (frente a EP1810GM-35)
Notas de diseño
The ceramic PGA package requires a through-hole PCB footprint with a 17x17 or 19x19 grid pattern depending on revision. For prototypes and low-volume production, use a machined-pin PGA socket (e.g., 3M Textool or equivalent) to allow UV erasure and reprogramming of the EPROM cells. For production, the device can be soldered directly into plated through-holes, but this permanently commits the programmed logic - ensure 100% design validation before solder-down. Decoupling: place one 0.1 uF ceramic capacitor per VCC pin and one 10 uF tantalum bulk capacitor near each VCC plane to suppress switching noise on the AND/OR array.
The "-35" speed grade suffix indicates 35 ns maximum tPD at 5.0 V VCC and 25 C ambient; at lower VCC (e.g., 4.75 V minimum) and higher temperature (e.g., 70 C commercial max), tPD may degrade by 10-20%. Designers should add 25% timing margin to address-to-chip-select paths. Additionally, the EPROM cell requires a 20-30 minute UV erasure at 12,000 uW/cm2 before reprogramming - ensure quartz-windowed packages are exposed properly. One-time-programmable (OTP) versions without a window require new silicon for each design change.
Although the EP1810GC-35AB is a 5 V CMOS device with TTL-compatible I/O, simultaneous switching of all 48 outputs can inject significant ground bounce on the GND pin and VCC rail. Use a 4-layer PCB with dedicated ground and power planes; avoid socket-based PGA connections for high-speed applications above 20 MHz. For designs exceeding 25 MHz toggle rates, series-damping resistors (22-33 ohm) on each output help dampen transmission-line reflections on traces longer than 50 mm. Estimated: a 48-output simultaneous switching event at 5 V/35 ns produces approximately 1.2 A of dynamic supply current.
Información de cumplimiento
Ceramic PGA package from the Classic EPLD family typically uses Sn/Pb solder balls/leads; lead-free status not confirmed in available web data. RoHS/REACH compliance not documented by Altera for this obsolete family.
