Texas Instruments

INA253A3IPW - 400mV/A Bidirectional Current Sense | Texas Instruments

MPN: INA253A3IPW ✓ فعال
-4 V to +80 V Vdss 2 mΩ Rds(on) 20-pin TSSOP, 0.173 inch (4.40 mm) width Package
حداقل سفارش: 1 |

INA253A3IPW نمای کلی

The Texas Instruments INA253A3IPW is a precision current-shunt monitor with a 400 mV/A gain, an 80 V common-mode range, and an integrated 2 mΩ low-inductive shunt resistor in a 20-pin TSSOP package. It supports bidirectional current measurement from -4 V to +80 V while combining a zero-drift chopped amplifier with integrated shunt-resistor current sensing.

A current-shunt monitor is an instrumentation amplifier that measures the small voltage generated across a precision shunt resistor as current flows through a conductor. The INA253 belongs to the current-sense amplifier hierarchy, where the amplified shunt voltage is filtered, digitized, or used for power monitoring and control. Its integrated resistor simplifies the sensing path, reduces external component count, and keeps the shunt geometry close to the amplifier for improved measurement repeatability.

The A3 gain option provides 400 mV/A, while the INA253 family also includes 100 mV/A and 200 mV/A versions. The device operates over a -4 V to +80 V common-mode range, independent of its supply voltage, which supports high-side sensing in 48 V industrial, communications, automotive, and power-system environments. Its 350 kHz -3 dB bandwidth accommodates dynamic current measurements while providing rejection of PWM-related disturbances.

The INA253A3IPW combines precision zero-drift signal conditioning with an integrated 2 mΩ shunt. Bidirectional operation allows the output to move above or below ground depending on current direction. The listed operating-temperature range is -40°C to +125°C, and the device is supplied in a 20-pin TSSOP package measuring 0.173 inch, or 4.40 mm, in width.

Typical uses include server and telecom power rails, industrial motor controls, battery-management systems, LED drivers, solenoid drivers, and automotive load monitoring. In each application, the shunt monitor converts bidirectional current into a proportional analog voltage, allowing a controller to monitor load current, detect overcurrent, or implement closed-loop power management.

PCB layout is critical because the integrated shunt and amplifier must be placed directly in the current path. High-current conductors should use short, wide copper, while the supply and ground connections should follow the manufacturer’s pin-assignment and layout guidance. Designers should also account for output settling, filter selection, and common-mode transient protection when operating near rapidly switching power stages.

This product page combines the exact ordering information, electrical characteristics, family-level comparison, and application guidance needed to plan an INA253A3-based current-measurement design. It also identifies which same-package alternatives can be evaluated when gain, automotive qualification, or supply requirements differ.

جایگزین‌های drop-in برای INA253A3IPW — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای INA253A3IPW (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Common-Mode Voltage Range, Gain, Operating Temperature Range, Output Type, PWM Rejection.

Texas Instruments
Common-Mode Voltage Range: -4 V to 80 V
Gain: 50 V/V
Operating Temperature Range: -40°C to 125°C
مقایسه با INA253A3IPW →

INA253A3QPWRQ1

✅ جایگزین مستقیم
📦 20-TSSOP
Retains the 400 mV/A A3 gain and 20-pin TSSOP format while changing qualification to the automotive Q1 variant; operational parameter differences must be checked in the datasheets.

📋 جایگزین مرجع (خارج از کاتالوگ)

INA253A1IPW

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
Texas Instruments
📦 20-TSSOP
Bidirectional precision current-sense amplifier · -4 V to 80 V · 80 V · 2.7 V to 5.5 V · 2 mΩ · 50 V/V · Bidirectional · Zero-drift

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

INA253A2IPW

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
Texas Instruments
📦 20-TSSOP
Bidirectional zero-drift current-shunt monitor · 2 mΩ · 200 mV/V · 2.7 V to 5.5 V · -4 V to +80 V · 350 kHz at -3 dB · 2.4 V/µs · 1.8 mA

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

INA253A4IPW

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 20-TSSOP
Uses a higher INA253A4 family gain than the 400 mV/A A3 option, producing a larger output per ampere; exact ratio and output-range limits must be confirmed in the manufacturer datasheet.

📋 جایگزین مرجع (خارج از کاتالوگ)

INA253A1QPWRQ1

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 20-TSSOP
Retains the 20-pin TSSOP family footprint and automotive Q1 qualification but uses 100 mV/A gain, producing 75% less output voltage per ampere than INA253A3IPW.

📋 جایگزین مرجع (خارج از کاتالوگ)

INA253A2QPWRQ1

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 20-TSSOP
Retains the 20-pin TSSOP family footprint and automotive Q1 qualification but uses 200 mV/A gain, producing 50% less output voltage per ampere than INA253A3IPW.

📋 جایگزین مرجع (خارج از کاتالوگ)

INA253A3IPW حداکثر مقادیر مجاز و مشخصات الکتریکی

Device Type Bidirectional zero-drift current-shunt monitor with integrated shunt resistor
Number of Channels 1 circuit
Gain 400 mV/A
Common-Mode Voltage Range -4 V to +80 V
Integrated Shunt Resistance 2 mΩ
Shunt Characteristics Precision, low-inductive integrated resistor
Signal Direction Bidirectional
Amplifier Architecture Zero-drift chopped amplifier
PWM Rejection Supported
Signal Bandwidth 350 kHz -3 dB
Slew Rate 2.4 V/µs
محدوده دمای کاری -40°C to +125°C
بسته‌بندی 20-pin TSSOP, 0.173 inch (4.40 mm) width
نوع نصب Surface mount
نوع خروجی Voltage output

راهنمای پیکربندی پین INA253A3IPW 20-pin tssop, 0.173 inch (4.40 mm) width

پیکربندی پین برای INA253A3IPW (پکیج 20-pin tssop, 0.173 inch (4.40 mm) width). این قطعه آنالوگ دارای پین‌های ورودی، خروجی و تغذیه است. برای پیکربندی‌های پین offset null، جبران‌سازی و فعال‌سازی به دیتاشیت سازنده مراجعه کنید. ایده‌آل برای مدارهای شرطی‌سازی سیگنال و تقویت‌کننده.

نمودار پین‌آوت پکیج 20-pin tssop, 0.173 inch (4.40 mm) width برای INA253A3IPW

داده پین‌آوت تفصیلی موجود نیست برای INA253A3IPW.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

INA253A3IPW مناسب است برای 6 کاربردs: 48V Industrial Power-Rail Monitoring, Server and Telecom PSU Current Sensing, Bidirectional Battery-Charge Monitoring, Motor and Solenoid Driver Control, Automotive Electrical-Load Monitoring, LED Driver and Lighting Load Regulation.

🏭

48V Industrial Power-Rail Monitoring

The INA253A3IPW fits high-side current measurement in 48 V industrial systems because its shunt input supports a -4 V to +80 V common-mode range and the integrated 2 mΩ resistor removes the need for an external precision shunt. The 400 mV/A gain converts 1 A into a 400 mV output signal, improving utilization of an ADC input near zero current. Place the device directly in the power path and use short, wide copper to minimize added resistance. Bidirectional operation is useful when the monitored conductor can source or sink current, while the 350 kHz bandwidth supports control loops faster than conventional slow current sensors.

🖥️

Server and Telecom PSU Current Sensing

The INA253A3IPW is suitable for measuring current in server, storage, and telecommunications power supplies where fault detection and load regulation require accurate feedback. Its 400 mV/A gain produces 400 mV at 1 A, allowing a controller to detect overloads without operating near the amplifier’s full-scale output at relatively low current. The integrated 2 mΩ shunt simplifies the power path and reduces board area, while the -4 V to +80 V common-mode range covers positive high-side rails. Designers should still include filtering appropriate to the switching environment and verify the output range against the ADC and supply rails.

⚡

Bidirectional Battery-Charge Monitoring

The INA253A3IPW can measure charge and discharge current in battery-management systems because its bidirectional output represents both current directions around the zero-current point. The 400 mV/A gain provides useful resolution for low-current balancing, diagnostics, and system power-flow control. Its integrated 2 mΩ shunt avoids mismatches between a discrete shunt and amplifier input, while the broad common-mode range supports batteries and buses operating within -4 V to +80 V. Layout the shunt path as a compact two-conductor loop, place the supply bypass capacitor close to the device, and confirm that the selected gain remains within the output range at maximum charge or discharge current.

🔧

Motor and Solenoid Driver Control

The INA253A3IPW suits motor-control and solenoid-driver feedback loops where the controller must observe load current rapidly and respond to overcurrent. Its 350 kHz -3 dB bandwidth and 2.4 V/µs slew rate provide substantially more bandwidth than many slow current sensors. The 400 mV/A gain produces a strong control signal, and the integrated shunt reduces external sensing-component count. In pulse-width-modulated power stages, use the amplifier’s PWM-rejection characteristics to preserve measurement fidelity. Keep the current path and shunt terminals away from high-dV/dt switch-node copper, and provide local supply bypassing to prevent injected noise from disturbing the control signal.

🚗

Automotive Electrical-Load Monitoring

The INA253 family is applicable to automotive electrical-load monitoring because the INA253A3IPW combines a wide -4 V to +80 V common-mode range with an integrated precision shunt. The 400 mV/A gain allows a controller to detect small load changes in battery-powered systems, and bidirectional sensing covers both charging and load current. The 20-pin TSSOP package supports compact control boards, while the -40°C to +125°C rating supports a broad environmental range. For a production automotive design, evaluate the Q1 ordering option when automotive qualification is required, and verify transient protection, ISO 7637-related design guidance, and all absolute-maximum limits in the manufacturer documentation.

💡

LED Driver and Lighting Load Regulation

The INA253A3IPW can provide load-current feedback in LED drivers and regulated lighting systems where constant-current performance and short-circuit protection are important. The 400 mV/A gain creates 400 mV at 1 A, giving a controller useful resolution for regulating moderate LED strings and detecting overloads. The integrated 2 mΩ shunt simplifies the current-sense network, while the broad common-mode range allows the sense element to remain in a high-side rail above the amplifier supply. Account for the bidirectional measurement range during startup and reverse-current conditions, verify the amplifier’s output swing at maximum current, and isolate switch-node routing from the sense path to maintain accuracy.

What is the INA253A3IPW?
The INA253A3IPW is a Texas Instruments bidirectional current-shunt monitor with a 400 mV/A gain, a 350 kHz -3 dB bandwidth, and an integrated 2 mΩ shunt resistor. According to the Texas Instruments INA253 product page, the device monitors currents over a common-mode range of -4 V to +80 V independent of the supply voltage. It is packaged in a 20-pin TSSOP and is intended for precision high-side current measurement.
What is the operating voltage range of INA253A3IPW?
The INA253A3IPW supports a measurement common-mode range of -4 V to +80 V, while its amplifier supply limits are defined separately by the manufacturer datasheet. The common-mode rating applies to the shunt input and allows the device to operate above its supply voltage. Consult the pin description and absolute-maximum tables in the Texas Instruments INA253 datasheet before selecting the supply rails and protection components.
What is the gain and bandwidth of INA253A3IPW?
The INA253A3IPW has a fixed gain of 400 mV/A and a -3 dB bandwidth of 350 kHz. According to the Texas Instruments INA253 product information, the family uses a precision zero-drift chopped amplifier with PWM rejection. The A3 gain produces 0.4 V at 1 A and 4 V at 10 A before any external output filtering.
Where can I download the INA253A3IPW datasheet PDF?
The official INA253A3IPW technical information is available through the Texas Instruments INA253 product page at https://www.ti.com/product/INA253. Select the exact INA253A3IPW orderable entry to access its datasheet and ordering information. The manufacturer documentation identifies the INA253 family as an 80 V bidirectional precision current-sense amplifier with an integrated 2 mΩ shunt resistor.
Where can I find the INA253A3IPW pinout?
The INA253A3IPW pinout is defined in the pin-configuration and pin-description sections of the Texas Instruments INA253 datasheet. The device uses a 20-pin TSSOP package, so every PCB footprint and schematic symbol must follow the manufacturer numbering exactly. Use that pin table to assign supply, ground, shunt-path, and output connections before laying out the current path.
How does the INA253A3IPW measure bidirectional current?
The INA253A3IPW senses the voltage across its integrated 2 mΩ shunt and amplifies the result at 400 mV/A. Because the device is bidirectional, the output can represent positive or negative current relative to the defined zero-current level. According to the Texas Instruments INA253 product page, the -4 V to +80 V common-mode range allows the shunt to operate independently of the amplifier supply voltage.
What can replace the INA253A3IPW?
The closest same-footprint choices are the other INA253 gain and automotive-qualified variants listed on this page. The INA253A3QPWRQ1 is especially relevant when the replacement must retain the 400 mV/A gain and 20-pin TSSOP footprint while adding automotive qualification. Confirm supply voltage, enable behavior, output reference, filtering, and pin-level timing against the manufacturer datasheet before substituting any variant.
Is INA253A3IPW the same as INA253A3QPWRQ1?
The INA253A3IPW and INA253A3QPWRQ1 share the INA253A3 gain designation and 20-pin TSSOP format, but they are positioned for different qualification requirements. The Q1 designation identifies the automotive-qualified variant, while the standard IPW device is selected for general industrial or commercial designs. Confirm exact operating limits and ordering details in the Texas Instruments documentation before treating them as interchangeable.
INA253A3IPW vs INA253A2IPW: which is better for a high-current measurement?
The INA253A3IPW is preferable when a larger output signal is useful at relatively low current because its gain is 400 mV/A, twice the 200 mV/A gain of INA253A2IPW. At the same measured current, it produces twice the output voltage and can improve ADC utilization. The trade-off is a lower full-scale output range for the same supply voltage, so the selected amplifier and ADC limits must be considered.
When should I choose INA253A3IPW over a lower-gain INA253 variant?
Choose INA253A3IPW when current measurements are small relative to the ADC input range and maximum sensitivity is more useful than a high full-scale output. Its 400 mV/A gain yields 0.4 V per ampere, which improves signal utilization for currents near zero. Choose a lower-gain option when expected current is higher or the amplifier output must remain below a lower supply or ADC limit.
Where can I buy INA253A3IPW and what is its price?
Use the Request a Quote form on this page to request INA253A3IPW availability, lead time, order quantity, and a current quotation. Stock and commercial terms can change, so the request form provides the appropriate purchasing path without publishing a potentially stale figure. Specify the exact 20-pin TSSOP ordering code INA253A3IPW and the required quantity.
Is INA253A3IPW in stock and what is its lead time?
Current INA253A3IPW stock and lead time should be confirmed through the Request a Quote form on this page. The verified listings include both stocked and quote-based channels, indicating that commercial availability can differ by quantity and order method. Provide the required production quantity, delivery location, and target date so the procurement response can reflect the current situation.
What is the best Maxim equivalent for INA253A3IPW?
No Maxim equivalent is established here as a verified pin-to-pin replacement for the INA253A3IPW. The target combines a 400 mV/A gain, an integrated 2 mΩ shunt, bidirectional sensing, and a 20-pin TSSOP package, and those features must match before a cross-brand part can be called drop-in. Use the alternatives list for verified same-package options and request a controlled cross-reference review before changing manufacturers.
How should INA253A3IPW be laid out on a PCB?
Place the INA253A3IPW so its integrated shunt lies directly in the high-current path and minimize the conductor length between the current terminals. Use short, wide copper for current-carrying nets and follow the Texas Instruments layout guidance for supply bypassing, ground return, and exposed routing geometry. Incorrect placement can introduce parasitic resistance, inductance, and asymmetry that degrade current measurement accuracy.
What are the key specifications of INA253A3IPW that engineers should know?
The key INA253A3IPW specifications are 400 mV/A gain, a 350 kHz -3 dB bandwidth, a 2.4 V/µs slew rate, a -4 V to +80 V common-mode range, an integrated 2 mΩ shunt, and a -40°C to +125°C operating range. According to the Texas Instruments INA253 product page, the device is bidirectional and combines PWM rejection with zero-drift signal conditioning. It is packaged in a 20-pin TSSOP.

داده‌های مرجع مهندسی برای INA253A3IPW — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose INA253A3IPW when the design requires a bidirectional high-side current measurement with a 400 mV/A output scale, a -4 V to +80 V common-mode range, and an integrated 2 mΩ shunt. The high gain improves measurement resolution when currents are relatively low or when an ADC needs a larger input signal. Choose INA253A2IPW when 200 mV/A provides sufficient output while retaining more headroom at higher current, and choose INA253A1IPW when minimum signal swing and maximum output range are more important than sensitivity. Use INA253A3QPWRQ1 when the same electrical gain and footprint are needed with automotive qualification. The alternatives are same-package family options rather than redesign-free cross-brand equivalents, so verify supply voltage, enable behavior, output reference, filtering, and automotive qualification before finalizing the PCB.

مقایسه با جایگزین‌ها

پارامتر این محصول INA253A3QPWRQ1 INA253A1IPW INA253A2IPW INA253A4IPW INA253A1QPWRQ1
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 20-TSSOP 20-TSSOP - same package 20-TSSOP - same package 20-TSSOP - same package 20-TSSOP - same package 20-TSSOP - same package
Integrated Shunt Resistance 2 mΩ 2 mΩ 2 mΩ 2 mΩ 2 mΩ 2 mΩ
Current Direction Bidirectional Bidirectional Bidirectional Bidirectional Bidirectional Bidirectional
Signal Conditioning Zero-drift chopped amplifier with PWM rejection Zero-drift chopped amplifier with PWM rejection Zero-drift chopped amplifier with PWM rejection Zero-drift chopped amplifier with PWM rejection Zero-drift chopped amplifier with PWM rejection Zero-drift chopped amplifier with PWM rejection

تفاوت‌های کلیدی

  • Highest standard-family gain option used in the comparison (در مقابلINA253A2IPW)
  • Integrated precision shunt simplifies the sensing path (در مقابلINA240A4DR)
  • Wide common-mode range enables high-side sensing above the supply (در مقابلINA253A1IPW)
  • Automotive-qualified family option retains the A3 gain (در مقابلINA253A3IPW)

یادداشت‌های طراحی

Place the INA253A3IPW directly in the high-current path and minimize copper length between the integrated shunt terminals and the load. Use short, wide conductors so PCB resistance adds as little error as possible to the 2 mΩ integrated shunt. Follow the Texas Instruments INA253 layout guidance for the shunt-current geometry and keep high-dV/dt switch-node copper physically separated from the amplifier inputs and output.

Route supply and ground connections directly to the device and place the recommended bypass capacitor close to the corresponding pins. Keep the sensitive analog output trace away from power inductors, switch nodes, and high-current return paths. Because the amplifier uses zero-drift signal conditioning, preserve a quiet ground reference and avoid adding unnecessary loops that can increase pickup of PWM-related noise.

Do not treat the -4 V to +80 V common-mode rating as the amplifier supply rating; these are separate limits. Before operation, verify the INA253A3IPW supply range, output swing, absolute-maximum ratings, and the output range of the connected ADC. At 400 mV/A, a 10 A current produces a 4 V sense output, so the downstream circuitry must support that voltage without clipping or violating its input limits.

The 350 kHz -3 dB bandwidth and 2.4 V/µs slew rate support dynamic current measurements, but additional output filtering can add phase delay in a control loop. If the INA253A3IPW drives an ADC, select a filter that preserves the required response time while attenuating switching ripple. Validate the complete current-to-digital path for settling, noise, and overload recovery before closing the control loop.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The INA253A3QPWRQ1 ordering option is identified as a Q1 automotive variant, but no explicit compliance declaration for INA253A3IPW is included in the verified product information.

تاریخ تأیید داده‌ها: 2026-11-19 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

INA253A3IPW datasheet INA253A3IPW datasheet pdf INA253A3IPW pinout INA253A3IPW specifications INA253A3IPW equivalent INA253A3IPW replacement INA253A3IPW vs INA253A2IPW INA253A3IPW footprint INA253A3IPW price INA253A3IPW stock Texas Instruments INA253A3IPW INA253A3IPW current sense amplifier

قطعات و اصطلاحات مرتبط

Texas Instruments INA253A3IPW INA253A3QPWRQ1 INA253A1IPW INA253A2IPW INA253A4IPW INA240A4DR ADS1262IPW ADS1131IDR current-shunt monitor current-sense amplifier instrumentation amplifier zero-drift amplifier chopped amplifier bidirectional current measurement common-mode voltage PWM rejection power-supply rejection ratio integrated shunt resistor TSSOP-20 surface-mount package high-side current sensing industrial power supply battery management
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ