STM32F765ZGT6 - 216MHz Cortex-M7 MCU, 1MB Flash | STMicroelectronics
MPN: STM32F765ZGT6 ✓ فعالSTM32F765ZGT6 نمای کلی
A microcontroller (MCU) is a single-chip embedded computer that combines a processor core, on-chip memory, and programmable peripherals, sitting at the heart of nearly every modern electronic system. Within the component taxonomy, the STM32F765ZGT6 belongs to the STM32F7 series of 32-bit Flash MCUs, which falls under the broader STM32 family and the ARM Cortex-M ecosystem, serving industrial, consumer, and medical applications that demand more compute headroom than Cortex-M4 devices can deliver. The Cortex-M7 in turn inherits from ARM's Cortex-M processor lineage, while MCU itself is a hypernym of microprocessor.
Key differentiating features include the Adaptive Real-Time (ART) Accelerator with 16 Kbytes I/D L1 cache enabling 0-wait-state execution from embedded Flash, the Chrom-ART Accelerator (DMA2D) that offloads 2D graphics work, and a rich peripheral set including multiple 12-bit ADCs, DACs, advanced timers, USART/UART, SPI, I2C, CAN, USB OTG full-speed/high-speed, an Ethernet MAC with IEEE 1588 support, and a camera interface. A flexible external memory controller (FMC) supports SDRAM, SRAM, and NOR/NAND Flash for large frame buffers.
Technically, the Cortex-M7 6-stage pipeline with branch prediction and dual-issue capability sustains high throughput even under interrupt load, while the integrated FPU accelerates signal-processing tasks. Supply range is 1.7V to 3.6V with operation from -40C to +85C ambient for the STM32F765ZGT6 industrial grade, and the part supports Sleep, Stop, and Standby low-power modes.
Typical applications include industrial automation (PLCs, motor control), human-machine interfaces with graphical TFT displays, IoT gateways where the Ethernet MAC enables precise IEEE 1588 time synchronization, and audio processing using the DSP extensions. The wide peripheral set also suits building automation, point-of-sale terminals, and medical instrumentation.
Design-wise, place 100nF decoupling capacitors on each VDD pin and a 4.7uF bulk cap on the main supply, follow ST's reference layout for the HSE crystal and VREF+ analog domain, and exploit the low-power modes for battery-sensitive designs.
This page synthesizes distributor pricing, drop-in alternatives, FAQ answers, and practical design notes not found in the manufacturer datasheet, with pricing as of 2026-10-10.
جایگزین‌های drop-in برای STM32F765ZGT6 — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونه‌ها در این سری
مدل‌های هم‌سری که جایگزین مستقیم هستند برای STM32F765ZGT6 (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Package, Operating Temperature, Core, SRAM, RoHS Status.
STM32F767ZGT6
برای قیمت تماس بگیرید
مشاهده دیتاشیت ←STM32F746ZGT6
برای قیمت تماس بگیرید
مشاهده دیتاشیت ←STM32F756BGT6
برای قیمت تماس بگیرید
مشاهده دیتاشیت ←STM32F779BIT6
برای قیمت تماس بگیرید
مشاهده دیتاشیت ←STM32F769ZGT6
📋 جایگزین مرجع (خارج از کاتالوگ)
STM32F765ZGT6 حداکثر مقادیر مجاز و مشخصات الکتریکی
| Core | ARM Cortex-M7 with double-precision FPU |
| Maximum CPU Frequency | 216 MHz |
| DMIPS | 462 DMIPS (2.14 DMIPS/MHz, Dhrystone 2.1) |
| Flash Memory | 1 MB |
| SRAM | 384 KB |
| L1 Cache | 16 KB I/D cache |
| ولتاژ تغذیه | 1.7 V to 3.6 V |
| دمای کاری | -40 C to +85 C |
| بسته‌بندی | 144-LQFP (20x20 mm) |
| نوع نصب | Surface Mount |
| ADC | 12-bit (multiple instances) |
| DAC | 12-bit |
| Communication | USART, SPI, I2C, CAN, USB OTG FS/HS, Ethernet MAC with IEEE 1588 |
| External Memory Controller | FMC for SDRAM, SRAM, NOR/NAND Flash |
| ART Accelerator | Yes (0-wait-state Flash execution) |
| Chrom-ART Accelerator (DMA2D) | Yes |
| وضعیت RoHS | Compliant |
پیکربندی پین STM32F765ZGT6
| پین 1 | PE2 — GPIO PE2 / TRACECLK / SPI4_SCK |
| پین 2 | PE3 — GPIO PE3 / TRACED0 |
| پین 3 | PE4 — GPIO PE4 / TRACED1 / SPI4_NSS |
| پین 4 | PE5 — GPIO PE5 / TRACED2 / SPI4_MISO / TIM9_CH1 |
| پین 5 | PE6 — GPIO PE6 / TRACED3 / SPI4_MOSI / TIM9_CH2 |
| پین 6 | VBAT — RTC backup supply |
| پین 7 | PC13 — GPIO PC13 / RTC_TAMP1 |
| پین 8 | PC14 — GPIO PC14 / OSC32_IN |
| پین 9 | PC15 — GPIO PC15 / OSC32_OUT |
| پین 10 | VREF+ — ADC reference voltage |
| پین 11 | VDDA — Analog supply |
| پین 12 | PA0 — GPIO PA0 / UART4_TX / TIM5_CH1 |
| پین 13 | PA1 — GPIO PA1 / UART4_RX / TIM5_CH2 |
| پین 14 | PA2 — GPIO PA2 / USART2_TX / TIM5_CH3 |
| پین 15 | PA3 — GPIO PA3 / USART2_RX / TIM5_CH4 |
| پین 16 | VSS — Ground |
| پین 17 | VDD — Digital supply |
| پین 18 | PA4 — GPIO PA4 / SPI1_NSS / DAC_OUT1 |
| پین 19 | PA5 — GPIO PA5 / SPI1_SCK / DAC_OUT2 |
| پین 20 | PA6 — GPIO PA6 / SPI1_MISO / TIM13_CH1 |
| پین 21 | PA7 — GPIO PA7 / SPI1_MOSI / TIM14_CH1 |
| پین 22 | PC4 — GPIO PC4 / USART3_TX / ETH_RXD0 |
| پین 23 | PC5 — GPIO PC5 / USART3_RX / ETH_RXD1 |
| پین 24 | PB0 — GPIO PB0 / TIM3_CH3 / ETH_RXD2 |
| پین 25 | PB1 — GPIO PB1 / TIM3_CH4 / ETH_RXD3 |
| پین 26 | PB2 — GPIO PB2 / BOOT1 |
| پین 27 | PF11 — GPIO PF11 / FMC_NRAS |
| پین 28 | PF12 — GPIO PF12 / FMC_A6 |
| پین 29 | VSS — Ground |
| پین 30 | VDD — Digital supply |
| پین 31 | PF13 — GPIO PF13 / FMC_A7 |
| پین 32 | PF14 — GPIO PF14 / FMC_A8 |
| پین 33 | PF15 — GPIO PF15 / FMC_A9 |
| پین 34 | PG0 — GPIO PG0 / FMC_A10 |
| پین 35 | PG1 — GPIO PG1 / FMC_A11 |
| پین 36 | PE7 — GPIO PE7 / UART7_RX / FMC_D4 |
| پین 37 | PE8 — GPIO PE8 / UART7_TX / FMC_D5 |
| پین 38 | PE9 — GPIO PE9 / TIM1_CH1 / FMC_D6 |
| پین 39 | VSS — Ground |
| پین 40 | VDD — Digital supply |
| پین 41 | PE10 — GPIO PE10 / TIM1_CH2 / FMC_D7 |
| پین 42 | PE11 — GPIO PE11 / TIM1_CH3 / FMC_D8 |
| پین 43 | PE12 — GPIO PE12 / TIM1_CH4 / FMC_D9 |
| پین 44 | PE13 — GPIO PE13 / SPI4_MISO / FMC_D10 |
| پین 45 | PE14 — GPIO PE14 / SPI4_MOSI / FMC_D11 |
| پین 46 | PE15 — GPIO PE15 / FMC_D12 |
| پین 47 | PB10 — GPIO PB10 / I2C2_SCL / USART3_TX |
| پین 48 | PB11 — GPIO PB11 / I2C2_SDA / USART3_RX |
| پین 49 | VCAP_1 — Core voltage decoupling (1.2V LDO) |
| پین 50 | VDD — Digital supply |
| پین 51 | VSS — Ground |
| پین 52 | PB12 — GPIO PB12 / SPI2_NSS / I2S2_WS |
| پین 53 | PB13 — GPIO PB13 / SPI2_SCK / I2S2_CK |
| پین 54 | PB14 — GPIO PB14 / SPI2_MISO / TIM12_CH1 |
| پین 55 | PB15 — GPIO PB15 / SPI2_MOSI / TIM12_CH2 |
| پین 56 | PD8 — GPIO PD8 / USART3_TX / FMC_D13 |
| پین 57 | PD9 — GPIO PD9 / USART3_RX / FMC_D14 |
| پین 58 | PD10 — GPIO PD10 / FMC_D15 |
| پین 59 | PD11 — GPIO PD11 / USART3_CTS / FMC_A16 |
| پین 60 | PD12 — GPIO PD12 / TIM4_CH1 / FMC_A17 |
| پین 61 | PD13 — GPIO PD13 / TIM4_CH2 / FMC_A18 |
| پین 62 | VSS — Ground |
| پین 63 | VDD — Digital supply |
| پین 64 | PD14 — GPIO PD14 / TIM4_CH3 / FMC_D0 |
| پین 65 | PD15 — GPIO PD15 / TIM4_CH4 / FMC_D1 |
| پین 66 | PG2 — GPIO PG2 / FMC_A12 |
| پین 67 | PG3 — GPIO PG3 / FMC_A13 |
| پین 68 | PG4 — GPIO PG4 / FMC_A14 |
| پین 69 | PG5 — GPIO PG5 / FMC_A15 |
| پین 70 | PG6 — GPIO PG6 / DCMI_D12 / LTDC_B7 |
| پین 71 | PG7 — GPIO PG7 / USART6_CK / LTDC_CLK |
| پین 72 | PG8 — GPIO PG8 / USART6_RTS / ETH_PPS_OUT |
| پین 73 | VSS — Ground |
| پین 74 | VDD — Digital supply |
| پین 75 | PG9 — GPIO PG9 / USART6_RX / DCMI_VSYNC |
| پین 76 | PG10 — GPIO PG10 / LTDC_B2 |
| پین 77 | PG11 — GPIO PG11 / ETH_TX_EN / LTDC_B3 |
| پین 78 | PG12 — GPIO PG12 / SPI6_MISO / LTDC_B4 |
| پین 79 | PG13 — GPIO PG13 / SPI6_SCK / LTDC_DE |
| پین 80 | PG14 — GPIO PG14 / SPI6_MOSI / LTDC_CLK |
| پین 81 | VSS — Ground |
| پین 82 | VDD — Digital supply |
| پین 83 | PG15 — GPIO PG15 / USART6_CTS / FMC_NCAS |
| پین 84 | PB3 — GPIO PB3 / SWO / SPI3_SCK |
| پین 85 | PB4 — GPIO PB4 / SPI3_MISO |
| پین 86 | PB5 — GPIO PB5 / SPI3_MOSI |
| پین 87 | PB6 — GPIO PB6 / I2C1_SCL / USART1_TX |
| پین 88 | PB7 — GPIO PB7 / I2C1_SDA / USART1_RX |
| پین 89 | BOOT0 — Boot mode select |
| پین 90 | PB8 — GPIO PB8 / I2C1_SCL / CAN1_RX |
| پین 91 | PB9 — GPIO PB9 / I2C1_SDA / CAN1_TX |
| پین 92 | PE0 — GPIO PE0 / TIM4_ETR |
| پین 93 | PE1 — GPIO PE1 |
| پین 94 | VSS — Ground |
| پین 95 | PDR_ON — Power-down reset enable |
| پین 96 | VDD — Digital supply |
| پین 97 | PI4 — GPIO PI4 / FMC_NBL0 |
| پین 98 | PI5 — GPIO PI5 / FMC_NBL1 |
| پین 99 | PI6 — GPIO PI6 / FMC_D30 |
| پین 100 | PI7 — GPIO PI7 / FMC_D31 |
| پین 101 | PI8 — GPIO PI8 / FMC_D24 |
| پین 102 | PI9 — GPIO PI9 / FMC_D25 |
| پین 103 | PI10 — GPIO PI10 / ETH_RX_ER / FMC_D26 |
| پین 104 | PI11 — GPIO PI11 / OTG_FS_DM |
| پین 105 | VSS — Ground |
| پین 106 | VDD — Digital supply |
| پین 107 | PA8 — GPIO PA8 / TIM1_CH1 / USART1_CK / OTG_FS_SOF |
| پین 108 | PA9 — GPIO PA9 / USART1_TX / OTG_FS_VBUS |
| پین 109 | PA10 — GPIO PA10 / USART1_RX / OTG_FS_ID |
| پین 110 | PA11 — GPIO PA11 / USART1_CTS / CAN1_RX / OTG_FS_DM |
| پین 111 | PA12 — GPIO PA12 / USART1_RTS / CAN1_TX / OTG_FS_DP |
| پین 112 | PA13 — GPIO PA13 / JTMS / SWDIO |
| پین 113 | VCAP_2 — Core voltage decoupling (1.2V LDO) |
| پین 114 | VSS — Ground |
| پین 115 | VDD — Digital supply |
| پین 116 | PA14 — GPIO PA14 / JTCK / SWCLK |
| پین 117 | PA15 — GPIO PA15 / JTDI / SPI3_NSS |
| پین 118 | PC6 — GPIO PC6 / TIM3_CH1 / USART6_TX |
| پین 119 | PC7 — GPIO PC7 / TIM3_CH2 / USART6_RX |
| پین 120 | PC8 — GPIO PC8 / TIM3_CH3 / USART6_CK |
| پین 121 | PC9 — GPIO PC9 / TIM3_CH4 / I2C3_SDA |
| پین 122 | PA15 — GPIO PA15 / JTDI |
| پین 123 | VSS — Ground |
| پین 124 | VDD — Digital supply |
| پین 125 | PD0 — GPIO PD0 / CAN1_RX / FMC_D2 |
| پین 126 | PD1 — GPIO PD1 / CAN1_TX / FMC_D3 |
| پین 127 | PD2 — GPIO PD2 / TIM3_ETR / UART5_RX |
| پین 128 | PD3 — GPIO PD3 / USART2_CTS / FMC_CLK |
| پین 129 | PD4 — GPIO PD4 / USART2_RTS / FMC_NOE |
| پین 130 | PD5 — GPIO PD5 / USART2_TX / FMC_NWE |
| پین 131 | VSS — Ground |
| پین 132 | VDD — Digital supply |
| پین 133 | PD6 — GPIO PD6 / USART2_RX / FMC_NWAIT |
| پین 134 | PD7 — GPIO PD7 / USART2_CK / FMC_NE1 |
| پین 135 | PG10 — GPIO PG10 / LTDC_B2 |
| پین 136 | PG11 — GPIO PG11 / ETH_TX_EN / LTDC_B3 |
| پین 137 | PG12 — GPIO PG12 / SPI6_MISO / LTDC_B4 |
| پین 138 | PG13 — GPIO PG13 / SPI6_SCK / LTDC_DE |
| پین 139 | PG14 — GPIO PG14 / SPI6_MOSI / LTDC_CLK |
| پین 140 | VSS — Ground |
| پین 141 | VDD — Digital supply |
| پین 142 | PB6 — GPIO PB6 / I2C1_SCL |
| پین 143 | PB7 — GPIO PB7 / I2C1_SDA |
| پین 144 | BOOT0 — Boot mode select |
کاربردهای معمول
STM32F765ZGT6 مناسب است برای 6 کاربردs: Industrial PLC and Motor Control, Human-Machine Interface (HMI) with TFT Display, IoT Gateway with Ethernet and TLS, Audio Processing and DSP Front-End, Medical Instrumentation and Patient Monitoring, Smart Home and Building Automation Hub.
Industrial PLC and Motor Control
The STM32F765ZGT6's 216 MHz Cortex-M7 with DSP extensions and FPU executes field-oriented control (FOC) loops on three-phase motors within the typical 10-20 kHz PWM cycle. Its three 12-bit ADCs sampled at 2.4 MSPS handle dual-shunt current sensing and back-EMF measurement with sub-microsecond conversion latency, while the advanced timer block generates complementary PWM with hardware dead-time insertion and break inputs for safe torque disable. The 1 MB Flash accommodates full IEC 61131-3 runtime plus customer application code, and 384 KB SRAM holds control loop working sets without external memory. For industrial control cabinets the 144-LQFP exposes enough GPIO for multiple encoder interfaces, CAN-FD links to other drives, and isolated UART commissioning ports. Wide 1.7-3.6V supply tolerance lets the part ride out 24V bus transients behind a simple buck regulator.
پیشنهادی
Human-Machine Interface (HMI) with TFT Display
Driving a 480x272 or 800x480 TFT panel from the STM32F765ZGT6 is straightforward thanks to the integrated LTDC controller and the Chrom-ART (DMA2D) accelerator that offloads 2D blits from the CPU. The Cortex-M7 plus 384 KB SRAM can hold a full frame buffer, while the FMC bus streams pixel data to the display at up to 50 MHz without CPU intervention. The 1 MB Flash stores LVGL or emWin graphics libraries plus bitmap assets, leaving room for application code and over-the-air update slots. Resistive or capacitive touch controllers connect over I2C/SPI, and USB OTG HS supports firmware update via a USB stick in the field. For sunlight-readable designs, the LTDC's per-layer color keying and blend modes simplify UI overlays without taxing the M7 pipeline.
پیشنهادی
IoT Gateway with Ethernet and TLS
The STM32F765ZGT6's Ethernet MAC with IEEE 1588 hardware timestamping delivers sub-microsecond clock discipline for protocols such as PTP, NTP, and Modbus TCP, while the dedicated DMA offloads packet handling from the Cortex-M7. The 1 MB Flash comfortably fits mbedTLS plus an MQTT-SN or CoAP broker stack, and 384 KB SRAM buffers incoming TLS sessions without overflow. The ART Accelerator keeps interrupt latency predictable when 1588 timestamps are inserted into the transmit path, and the Cortex-M7 DSP instructions accelerate any on-gateway analytics such as FFT vibration monitoring. USB OTG HS provides a second network path for cellular modems, while CAN-FD links to local sensor clusters. Wide temperature range and 3.3V operation suit outdoor DIN-rail gateways behind industrial PoE rails.
پیشنهادی
Audio Processing and DSP Front-End
Audio products such as active speakers, hearing aids, and automotive headrest displays benefit from the STM32F765ZGT6's single-precision FPU plus DSP extensions, which execute FFT, FIR, and biquad filter kernels at 216 MHz with deterministic cycle counts. The three 12-bit ADCs (with optional interleaving to 7.2 MSPS equivalent) capture multi-microphone arrays for beamforming, while the two 12-bit DACs output line-level audio or PWM drive for Class-D amplifiers. The SAI and I2S peripherals stream samples to external codecs, and 384 KB SRAM holds overlapping audio buffers plus a heap for FreeRTOS plus middleware. With 1 MB Flash the device stores audio effect libraries, voice prompt samples, and the main control loop, all from a single 3.3V supply.
پیشنهادی
Medical Instrumentation and Patient Monitoring
Patient monitors, infusion pumps, and portable diagnostic devices use the STM32F765ZGT6 to combine deterministic Cortex-M7 control with rich connectivity. The 12-bit ADCs sampled at 2.4 MSPS digitize ECG, SpO2, and respiration channels with low noise, while the FPU runs Pan-Tompkins QRS detection or FIR filters in real time. The USB OTG HS port supports tethered firmware update by clinical engineers, and the Ethernet MAC with IEEE 1588 timestamps HL7 data packets on hospital networks. The 1 MB Flash accommodates IEC 62304-compliant code with revision history, and 384 KB SRAM handles waveform ring buffers without DMA thrash. Industrial -40C to +85C operation covers the full medical equipment ambient range, and the LQFP-144 footprint gives plenty of analog and digital GPIO for sensor multiplexing.
پیشنهادی
Smart Home and Building Automation Hub
Zigbee, Matter, and KNX gateways rely on the STM32F765ZGT6 to act as the application processor alongside one or more radio co-processors. The Cortex-M7 at 216 MHz handles Matter commissioning flows, device database, and automation rules while the Ethernet MAC provides the wired uplink, and USB OTG HS adds a second IP path via a cellular or Wi-Fi dongle. The flexible memory controller (FMC) lets designers add SDRAM for large device databases, while the 1 MB Flash fits the full Matter stack plus OTA bootloader. Multiple UARTs, SPIs, and I2Cs interface with radios, sensors, and the host processor of HVAC controllers, and the SDIO peripheral supports an SD card for local event logging. Wide operating temperature and 3.3V supply suit DIN-rail enclosures in basement equipment rooms.
پیشنهادی
خلاصه محصولات پیشنهادی
داده‌های مرجع مهندسی برای STM32F765ZGT6 — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزین‌ها
| پارامتر | این محصول | STM32F767ZGT6 | STM32F769ZGT6 | STM32F746ZGT6 | STM32F756BGT6 | STM32F779BIT6 |
|---|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 144-LQFP (20x20 mm) | 144-LQFP (20x20 mm) - same | 144-LQFP (20x20 mm) - same | 144-LQFP (20x20 mm) - same | 144-LQFP (20x20 mm) - same | 144-LQFP (20x20 mm) - same |
| CPU Core | ARM Cortex-M7 | ARM Cortex-M7 | ARM Cortex-M7 | ARM Cortex-M7 | ARM Cortex-M7 | ARM Cortex-M7 |
| Max CPU Frequency | 216 MHz | 216 MHz | 216 MHz | 216 MHz | 216 MHz | 216 MHz |
| Flash Memory | 1 MB | 2 MB | 2 MB | 1 MB | 1 MB | 2 MB |
| SRAM | 384 KB | 512 KB | 512 KB | 320 KB | 320 KB | 512 KB |
| Hardware Crypto (AES/SHA/RNG) | No | Yes | Yes | No | No | Yes |
| Display Interface | LTDC (no DSI) | LTDC | LTDC + MIPI-DSI | LTDC | LTDC | LTDC + MIPI-DSI |
تفاوت‌های کلیدی
- Balanced Flash/SRAM density for graphics and DSP (در مقابلSTM32F746ZGT6)
- Best price-to-specs ratio without crypto overhead (در مقابلSTM32F767ZGT6)
- Pin-compatible upgrade path to MIPI-DSI (در مقابلSTM32F769ZGT6)
یادداشت‌های طراحی
Place a 100nF ceramic decoupling capacitor as close as possible to every VDD pin and a 4.7uF bulk capacitor on the main 3.3V rail. The VCAP_1 and VCAP_2 pins each need a 2.2uF low-ESR capacitor to stabilize the internal 1.2V core LDO. Failure to populate the VCAP caps causes core supply ripple and erratic Cortex-M7 execution at 216 MHz. Keep the digital and analog supply planes separate, joining them only at a single ferrite bead.
The STM32F765ZGT6 in 144-LQFP has a junction-to-ambient thermal resistance of approximately 50 C/W on a standard 4-layer PCB. At 216 MHz with all peripherals active the core dissipates around 200 mW, giving a self-heating rise of 10 C above ambient, well within the 85 C industrial limit. For closed enclosures with restricted airflow, add a copper pour under the exposed die pad area (the LQFP-144 has no thermal pad, but a 4-layer PCB with stitched vias to the inner ground plane reduces theta_JA by 30%).
Route the HSE crystal traces as short, impedance-matched pairs within 5 mm of the OSC_IN/OSC_OUT pins, with a guard ground on each side to keep digital switching noise out of the oscillator. The Ethernet MII/RMII signals to the PHY must be length-matched within 50 mil and reference a solid ground plane; USB DP/DM traces need 90-ohm differential impedance and an ESD array at the connector. Avoid routing the SDRAM clock under the analog VREF+ pin.
Do not enable the L1 cache before initializing the external memory controller on STM32F765ZGT6 - speculative fetches can return stale data from unmapped SDRAM. Always boot from internal Flash first, configure the FMC SDRAM timing registers from ST's reference examples, then enable the cache. Also remember that pins PB3/PB4/PA15 default to JTAG functions after reset; remap them to GPIO via the appropriate alternate-function mapping before driving them as outputs.
اطلاعات انطباق
RoHS and REACH compliance per ST product page. AEC-Q100 qualification not applicable for standard STM32F765ZGT6 industrial grade; STM32F765ZGT6 is not AEC-Q100 qualified.
