Circuits intégrés

Sous-catégories

📁 ADC/DAC 3 100+ produits 📁 CI amplificateurs 1 700+ produits 📁 Codecs audio 18 produits 📁 CI audio 2 produits 📁 Horloge et synchronisation 640+ produits 📁 Comparator ICs 1 produits 📁 DSP 1 100+ produits 📁 CI d'acquisition de données 2 produits 📁 Potentiomètres numériques 4 produits 📁 Pilotes et contrôleurs d'affichage 1 produits 📁 FPGA & CPLD 7 100+ produits 📁 Circuits intégrés d'interface 3 100+ produits 📁 Pilotes de LED 1 produits 📁 CI logiques 450+ produits 📁 CI mémoire 870+ produits 📁 Microcontrôleurs 20 000+ produits 📁 Microprocesseurs 4 produits 📁 Pilotes de moteur 1 produits 📁 Autres 1 produits 📁 Sensor and Detector Interfaces 1 produits 📁 Circuits intégrés spécialisés 15 produits 📁 CI vidéo 13 produits

Produits (38 000+)

PIC32MZ2025DAA169T-I/HF - 200MHz 32-bit MCU, 2MB Flash, 169-LFBGA | Microchip
PIC32MZ2025DAA169T-I/HF

PIC32MZ2025DAA169T-I/HF - 200MHz 32-bit MCU, 2MB Flash, 169-LFBGA | Microchip

The Microchip PIC32MZ2025DAA169T-I/HF is a 32-bit MIPS32 microAptiv PIC32MZ DA graphics applications microcontroller operating at 200 MHz with 2 MB of Flash, 640 KB of SRAM, and a 169-ball LFBGA package (11x11 mm). The "DAA" suffix denotes the 2 MB Flash variant with on-chip DDR2 DRAM interface and integrated Graphics Controller/Graphics Processor for advanced GUI designs. A 32-bit microcontroller (MCU) is a programmable processor integrating CPU core, memory (Flash for code, SRAM for variables), and peripherals (ADC, timers, communication interfaces) on a single silicon die. The PIC32MZ family uses a 32-bit MIPS architecture (hypernym: MCU -> 32-bit MCU -> RISC microcontroller -> embedded processor), delivering MPU-like computational performance while preserving MCU simplicity. The DA subfamily extends this with an integrated 2D graphics controller, DDR2 memory controller, and Hi-Speed USB for Human-Machine Interface (HMI) applications. Key features of the PIC32MZ2025DAA169 include a 12-bit 18 MSPS ADC module with up to 45 analog inputs, CAN 2.0B and Hi-Speed USB 2.0 OTG interfaces, an integrated Graphics Processor with TFT/LCD controller supporting WVGA-class displays, and XLP (eXtreme Low Power) Technology for battery-friendly idle behavior. The 169-LFBGA package supports high-pin-count applications including external DDR2 DRAM (32 MB or 128 MB externally addressable). Technically, the device is built on a 65 nm low-power CMOS process with a 5-stage pipeline MIPS core. The Graphics Processor offloads rendering tasks from the CPU, freeing MIPS budget for application logic. The 2 MB Flash supports Live Update firmware partitioning for fail-safe in-field upgrades. The DDR2 controller supports 32 MB or 128 MB external DRAM, which is unusual for an MCU class device. Typical applications include industrial control HMIs with TFT/LCD displays, medical instrument touch panels, automotive infotainment, point-of-sale terminals, and IoT edge gateways with GUI. The integrated graphics controller eliminates an external GPU, reducing BOM cost for graphical products. When designing, ensure the 11x11 mm LFBGA land pattern can be fabricated with your PCB process (typically 0.5 mm or 0.8 mm pitch); BGA assembly requires X-ray inspection or AOI. Decouple VDD with 100 nF + 10 uF per rail near the IC. This page synthesizes distributor pricing, drop-in compatible LFBGA-169 alternatives, and practical design notes that complement the manufacturer datasheet.

Devis Contact
PIC32MZ2025DAA176-I/2J - 200MHz 32-bit MCU, 2MB Flash | Microchip
PIC32MZ2025DAA176-I/2J

PIC32MZ2025DAA176-I/2J - 200MHz 32-bit MCU, 2MB Flash | Microchip

The Microchip PIC32MZ2025DAA176-I/2J is a 32-bit MIPS microAptiv microcontroller from the PIC32MZ Graphics (DA) family, running at 200 MHz with 2 MB of Flash and 640 KB of SRAM in a 176-pin LQFP (20x20) package with an exposed thermal pad. It integrates an integrated Graphics Controller and Graphics Processor, supporting on-chip 32 MB or external 128 MB addressable DDR2 DRAM, and provides up to 45 analog inputs through a 12-bit 18 MSPS ADC, plus CAN and Hi-Speed USB connectivity. The /2J suffix designates a tray-packaged industrial-temperature (-40C to +85C) part qualified for graphics-rich human-machine interface (HMI) designs. A 32-bit microcontroller (MCU) is a single-chip processor core with integrated Flash, RAM and peripherals aimed at embedded applications. Microcontrollers sit inside the broader semiconductor hierarchy and the PIC32MZ DA family specifically targets applications that historically required a microprocessor plus external controller, combining MPU-like computational throughput with MCU simplicity, deterministic interrupts, and an easy-to-use toolchain (MPLAB X IDE + Harmony v3). The DA suffix further denotes the graphics-equipped variant of the family, integrating a display controller and 2D graphics processor to drive TFT LCD panels without an external GPU. Key differentiating features of this part include 200 MHz / 330 DMIPS core throughput, 2 MB dual-bank Flash with live update support, a 12-bit 18 MSPS ADC with up to 45 analog channels for motor and sensor acquisition, integrated Hi-Speed USB 2.0 (480 Mbps) with PHY, two CAN 2.0b controllers, and a parallel Graphics Controller driving resolutions up to WXGA (1280x768). The 640 KB SRAM and dedicated DDR2 interface let the system hold frame buffers and graphics assets without an external memory controller. Architecturally, the device combines a MIPS32 microAptiv core with a 7-stage pipeline, a tightly-coupled FPU, MMU for RTOS support, and dedicated bus masters for the graphics and USB peripherals. The integrated DDR2 controller simplifies BOM by removing external SDRAM glue logic, and the 32 MB on-chip graphics RAM enables smooth UI transitions on embedded TFT panels. The exposed thermal pad on the LQFP-176 package supports 1.5 W continuous dissipation typical of graphics HMI designs. Typical applications include industrial HMI panels, point-of-sale terminals, medical patient-interface displays, automotive infotainment prototypes, building automation touchscreens, and portable instrumentation requiring USB host/device connectivity. The 2 MB Flash and 640 KB SRAM also suit multi-protocol gateways where TCP/IP, Modbus and CAN coexist. When designing with this part, ensure the DDR2 PCB layout follows the JEDEC DDR2 routing recommendations (matched-length, reference-controlled impedance) and that the exposed pad is soldered to a sufficiently large copper area to meet the thermal envelope. This page synthesizes distributor pricing, drop-in same-package alternatives and practical design notes not always covered by the manufacturer datasheet.

Devis Contact
PIC32MZ2025DAA176T-I/2J - 200MHz 32-Bit MCU w/ GPU, 176-LQFP | Microchip
PIC32MZ2025DAA176T-I/2J

PIC32MZ2025DAA176T-I/2J - 200MHz 32-Bit MCU w/ GPU, 176-LQFP | Microchip

The Microchip Technology PIC32MZ2025DAA176T-I/2J is a 200 MHz 32-bit MIPS32 microAptiv graphics microcontroller from the PIC32MZ DA family, integrating a dedicated Graphics Processing Unit (GPU) and 2 MB of Flash program memory in a 176-pin LQFP exposed-pad package. The part belongs to the PIC32MZ DA graphics family that combines MPU-like performance with MCU simplicity, including 640 KB of SRAM, hardware graphics controller, and optional 32 MB or 128 MB of external DDR2 DRAM interface for high-resolution GUI applications. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program and data memory, peripherals, and I/O on a single die. The PIC32MZ DA family is a high-performance graphics MCU line from Microchip designed to simplify human-machine interface (HMI) and graphical display designs, sitting in the hierarchy: MCU -> embedded controller -> 32-bit microcontroller -> semiconductor IC. Compared with general-purpose MCUs, graphics MCUs add a GPU pipeline, display controller, and accelerated 2D primitives to offload rendering from the CPU core. Key features of this device include 200 MHz core clock, 2 MB Flash, 640 KB SRAM, 32 MB external DDR2 memory addressability, integrated GPU and Graphics Controller supporting TFT LCD interfaces, a 12-bit 18 MSPS ADC with up to 45 analog inputs, HS USB 2.0, dual CAN modules, and a comprehensive set of communication peripherals including UART, SPI, I2C, and EBI for external memory or graphics displays. The integrated crypto engine supports secure boot and AES/SHA acceleration for secured firmware and communications. Architecturally, the PIC32MZ2025DAA176T-I/2J uses a superscalar MIPS32 microAptiv core paired with the Microchip proprietary Graphics Processor and Display Controller. The GPU offloads 2D drawing primitives and JPEG decode operations from the CPU, allowing smoother animation and faster screen refresh rates. The wide peripheral integration reduces external component count, supporting compact HMI module designs. Typical applications include industrial HMI control panels, medical device touchscreens, automotive infotainment displays, IoT gateways with local UIs, home appliance user interfaces, and point-of-sale terminals. The graphics acceleration specifically targets TFT LCD panels from small (3.5 inch) to large (7-10 inch) resolutions, making the part a strong fit for embedded GUI designs. When designing with this part, ensure adequate PCB copper area beneath the exposed thermal pad for heat dissipation and mechanical stability. The DDR2 interface requires matched-length routing; engineers should consult Microchip application notes and reference designs to implement DDR2 PCB layout correctly. Programming is supported through MPLAB X IDE, MPLAB Harmony, and the XC32 compiler. This page synthesizes distributor pricing, drop-in alternatives from the same PIC32MZ DA family, and practical design notes not consolidated in the manufacturer datasheet.

Devis Contact
PIC32MZ2025DAA288-I/4J - 200MHz 32-Bit MCU, 2MB Flash | Microchip
PIC32MZ2025DAA288-I/4J

PIC32MZ2025DAA288-I/4J - 200MHz 32-Bit MCU, 2MB Flash | Microchip

The Microchip PIC32MZ2025DAA288-I/4J is a high-performance 32-bit MIPS32 microAptiv PIC microcontroller from the PIC32MZ Graphics (DA) family, delivering 200 MHz CPU speed with 2 MB Flash and 640 KB SRAM in a 288-pin LFBGA (15x15 mm) package. The device integrates an on-chip DDR2 DRAM controller supporting up to 128 MB of external memory, a hardware Graphics Processing Unit (GPU) and Graphics Controller, a 12-bit 18 MSPS ADC with up to 45 analog inputs, Hi-Speed USB, and CAN, making it a true MPU-class device in an MCU form factor. Designed for industrial-grade -40C to +85C operation, the -I/4J suffix denotes the industrial temperature range and the 288-ball LFBGA footprint. What is a 32-bit microcontroller? A 32-bit microcontroller is an embedded computing device with a 32-bit data path, registers, and ALU, enabling it to process more data per instruction cycle and to handle more complex software stacks than 8-bit or 16-bit MCUs. The PIC32MZ DA family sits at the high-performance end of this hierarchy: 32-bit MCU -> MIPS32 microAptiv core -> PIC32MZ family -> PIC32MZ Graphics (DA) sub-family -> Microchip microcontrollers -> embedded semiconductors. This taxonomy places the part squarely in the GUI-centric, graphics-rich HMI segment where raw MIPS, large RAM, and a hardware GPU are required. Key differentiating features include the dedicated GPU and Graphics Controller pipeline (which offloads 2D rendering and color space conversion from the CPU), 2 MB of Flash for code and asset storage, 640 KB of SRAM for frame buffers, and the DDR2 controller that lets the part address a 32 MB or 128 MB external DDR2 for high-bandwidth display buffering. Connectivity includes Hi-Speed USB 2.0, CAN 2.0, multiple UARTs, SPI, I2C, and parallel PMP, giving the device rich peripheral integration for industrial HMI, automotive cluster, and medical display designs. Typical use cases span industrial control HMIs with TFT LCD touchscreens, automotive instrument clusters and infotainment panels, medical patient-monitoring displays, point-of-sale terminals, and any graphics-heavy embedded GUI requiring 32-bit MIPS performance. When designing with this part, route the DDR2 traces with strict length matching and controlled impedance, and provide the dedicated GPU clock and reset sequencing described in the Microchip device data sheet to avoid GPU lockup on cold start.

Devis Contact
PIC32MZ2025DAA288T-I/4J - 200MHz MCU 2MB Flash LFBGA-288 | Microchip
PIC32MZ2025DAA288T-I/4J

PIC32MZ2025DAA288T-I/4J - 200MHz MCU 2MB Flash LFBGA-288 | Microchip

The Microchip PIC32MZ2025DAA288T-I/4J is a high-performance 32-bit MIPS microcontroller from the PIC32MZ DA family, featuring a 200 MHz MIPS32 microAptiv core with 2 MB of Flash and 640 KB of SRAM, housed in a 288-pin LFBGA package (15 x 15 mm). A 32-bit microcontroller (MCU) is a single-chip computer that integrates a 32-bit processor core, program memory (Flash), data memory (SRAM), and a rich set of peripherals. Within the taxonomy, the PIC32MZ DA family belongs to the PIC32 family -> PIC family -> 8/16/32-bit MCUs -> microcontrollers -> embedded semiconductors. The DA suffix specifically denotes Microchip's "Graphical" sub-family with an integrated Graphics Controller, Graphics Processor, and DDR2 DRAM interface for human-machine interface (HMI) and GUI applications. Key features of this part include 2 MB (2M x 8) Flash, 640 KB SRAM, an integrated 12-bit 18 MSPS ADC with up to 45 analog inputs, an integrated LDO for DDR2 power, High-Speed USB, CAN, and external DDR2 DRAM support (32 MB or 128 MB externally addressable). The device operates from a 1.8 V supply and ships in a 288-LFBGA (15x15) package with industrial-grade temperature range (-40C to +85C). The architecture combines a deterministic interrupt response with a cache-based execution pipeline, allowing MPU-class throughput (up to 252 DMIPS) while retaining the simplicity of an MCU programming model. The integrated Graphics Processor supports TFT LCDs up to 24-bit color, freeing the CPU for application logic. Typical applications include industrial machine control HMIs, automotive instrument clusters, medical patient monitors with integrated displays, smart-building control panels, and graphics-rich IoT gateways. The DDR2 interface is critical when buffering large frame buffers for WVGA or QVGA TFT panels. When designing with this device, prioritize a 6-layer PCB for the DDR2 routing. Use Microchip's MPLAB Harmony software framework to leverage pre-validated graphics and USB stacks. This page synthesizes distributor pricing, same-package alternatives, and practical design notes not found in the manufacturer datasheet.

Devis Contact
PIC32MZ2025DAB169T-I/HF - 32-bit 200MHz MCU 2MB Flash 169-LFBGA
PIC32MZ2025DAB169T-I/HF

PIC32MZ2025DAB169T-I/HF - 32-bit 200MHz MCU 2MB Flash 169-LFBGA

The Microchip PIC32MZ2025DAB169T-I/HF is a 32-bit MIPS32 microAptiv PIC32MZ DA microcontroller running at 200 MHz with 2 MB of Flash and 640 KB of SRAM in a 169-pin LFBGA (11x11 mm) package. It targets graphical HMI and connected embedded designs that need MPU-class throughput without leaving the MCU ecosystem. According to the Microchip product page, the device integrates a hardware Graphics Controller and Graphics Processor, an on-chip DDR2 DRAM controller addressable up to 128 MB externally, a 12-bit 18 MSPS ADC with up to 45 analog inputs, plus CAN and Hi-Speed USB. A 32-bit MCU is a microcontroller built around a 32-bit data path and 32-bit registers, which lets it process larger operands and addresses in a single instruction than 8-bit or 16-bit parts. The PIC32MZ DA family sits at the top of the PIC32 hierarchy (PIC32 > 32-bit MCU > MIPS32 microAptiv core > PIC32MZ DA sub-family), giving designers an MCU-style programming model with peripherals, RTOS support, and a wide toolchain while delivering 200 MHz / 330 DMIPS-class throughput that overlaps entry-level MPU workloads. Three headline features differentiate this part: 2 MB Flash with 640 KB SRAM for full LVGL / emWin stacks and asset storage; an integrated 2D Graphics Processor with parallel RGB interface for TFT up to WXGA, removing external GPU cost; and a 12-bit 18 MSPS ADC with up to 45 analog inputs, enabling multi-sensor data acquisition without an external ADC. The 11x11 mm LFBGA-169 footprint keeps board area compact for handhelds and panel-mount HMIs. Architecturally the device pairs a MIPS32 microAptiv core with a 5-stage pipeline and tightly-coupled peripherals routed through a multi-layer AHB/APB fabric. Designers get deterministic interrupt latency from the MIPS core, while the on-chip DDR2 controller absorbs the memory bandwidth demanded by frame-buffer refreshes at full panel resolution. Typical applications include industrial HMI panels, home-automation gateways with touch displays, point-of-sale terminals, medical patient monitors, and CAN/USB-connected sensor hubs. The 200 MHz core and large SRAM make it equally suitable for GUI, motor-control, and audio-processing sub-systems. When designing with this device, watch the LFBGA escape routing and provide at least four PCB layers with via-in-pad recommended for the inner-row balls. Use Microchip's MPLAB Harmony configurator to initialize the DDR2 controller and Graphics Processor - manual register-level bring-up is rarely practical for production timelines. This page synthesizes distributor pricing, drop-in LFBGA-169 alternatives, and practical bring-up guidance not found in the manufacturer datasheet alone.

Devis Contact
PIC32MZ2025DAB176-I/2J - 32-bit 200MHz MCU, 2MB Flash | Microchip
PIC32MZ2025DAB176-I/2J

PIC32MZ2025DAB176-I/2J - 32-bit 200MHz MCU, 2MB Flash | Microchip

The Microchip PIC32MZ2025DAB176-I/2J is a 32-bit MIPS32 microAptiv microcontroller from the PIC32MZ Graphics (DA) family, integrating 2MB of Flash and 640KB of SRAM with a 200MHz CPU core, housed in a 176-pin LQFP (20x20mm) package with an exposed thermal pad. The device combines MPU-like performance with MCU design simplicity, making it suitable for graphics-driven embedded applications. Operating from a 3.3V supply, it includes a 12-bit 18 MSPS ADC module with up to 45 analog inputs, plus CAN, HS USB, and an integrated Graphics Controller and Graphics Processor. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a 32-bit processor core, program memory (Flash), data memory (RAM), and a rich set of on-chip peripherals. The PIC32MZ DA family belongs to the broader taxonomy of MCU -> embedded processor -> semiconductor device, designed for applications requiring real-time control combined with high-throughput data processing. The MIPS32 microAptiv core implements the MIPS Release 2 instruction set with DSP and microMIPS extensions, balancing deterministic interrupt response with high computational throughput. Key features that differentiate this part include 2MB of on-chip Flash (2M x 8), 640KB of SRAM, and support for an external 32MB or 128MB addressable DDR2 DRAM, allowing large frame buffers for GUI applications. The integrated Graphics Controller and dedicated Graphics Processor accelerate image rendering, while the 12-bit 18 MSPS ADC supports high-speed analog sampling for sensor fusion. Communication peripherals include High-Speed USB 2.0, CAN, and multiple UART/SPI/I2C interfaces for industrial networking. Typical applications include industrial HMI (human-machine interface) panels, graphical touch-screen controllers, building automation displays, medical patient monitors with rich UIs, automotive infotainment entry-level graphics, and IoT gateways requiring on-screen diagnostics. The exposed pad package aids thermal dissipation in continuous-display applications. When designing with this device, ensure the DDR2 DRAM interface is routed with controlled impedance (50 ohm single-ended, 100 ohm differential) and matched lengths to avoid signal-integrity issues. The exposed thermal pad must be soldered to a sufficient copper pour (minimum 1 square inch) to maintain junction temperature within the 85C industrial range. MPLAB Harmony 3 framework is the recommended software stack for graphics middleware integration. This page synthesizes distributor pricing, drop-in compatible alternatives, and practical design notes not consolidated in the manufacturer datasheet alone.

Devis Contact
PIC32MZ2025DAB176T-I/2J - 200MHz 32-Bit MCU, 2MB Flash, 176-LQFP
PIC32MZ2025DAB176T-I/2J

PIC32MZ2025DAB176T-I/2J - 200MHz 32-Bit MCU, 2MB Flash, 176-LQFP

The Microchip PIC32MZ2025DAB176T-I/2J is a high-performance 32-bit MIPS32 microAptiv PIC32MZ DA microcontroller delivering 200 MHz of CPU clock speed, 2 MB of on-chip Flash and up to 640 KB of SRAM, all integrated in a 176-pin LQFP (20x20 mm) package with exposed pad. It is purpose-built for MPU-class GUI workloads, combining an integrated Graphics Controller, Graphics Processor, and DDR2 DRAM controller (up to 128 MB externally addressable) on a single MCU die. A microcontroller (MCU) is a single-chip computer containing a CPU core, volatile and non-volatile memory, and a rich set of programmable peripherals. PIC32MZ DA devices extend the classic MCU architecture toward MPU-class multimedia applications by integrating DDR2 memory control, parallel graphics output, and hardware accelerated drawing primitives. Within the broader semiconductor hierarchy, this places the part as: microcontroller -> 32-bit MCU -> MIPS-based MCU -> graphics-enabled MCU -> embedded system-on-chip. Key features include a 12-bit 18 MSPS ADC with up to 45 analog inputs, dual CAN 2.0b interfaces, Hi-Speed USB 2.0 (480 Mbps) with on-chip PHY, 10/100 Ethernet MAC, and HSPI/QSPI for high-throughput peripherals. The integrated graphics pipeline supports TFT panels directly, eliminating external LCD controller cost. A wide operating voltage range of 2.6 V to 3.6 V simplifies battery-powered designs. Typical applications span industrial HMI panels, point-of-sale terminals, smart appliances with graphical displays, medical instrumentation readouts, automotive infotainment (non-safety), and IoT gateways with local rendering. The 200 MHz core with hardware multiply/divide and DSP extensions enables smooth LVGL/Micrium GUI rendering at typical WVGA resolutions. Designers should plan for an external DDR2 SDRAM, follow Microchip application note guidance for DDR2 trace length matching, and provide bulk decoupling near the 1.2 V core regulator pin. The exposed thermal pad must be soldered to a sufficient copper pour for thermal dissipation. This page aggregates authoritative distributor pricing, parametric comparison against same-package drop-in alternatives from the PIC32MZ DA family, and engineering design guidance not duplicated in the Microchip datasheet.

Devis Contact
PIC32MZ2025DAB288T-I/4J - 200MHz 32-Bit MCU 2MB Flash | Microchip
PIC32MZ2025DAB288T-I/4J

PIC32MZ2025DAB288T-I/4J - 200MHz 32-Bit MCU 2MB Flash | Microchip

The Microchip Technology PIC32MZ2025DAB288T-I/4J is a 32-bit MIPS32 microAptiv microcontroller from the PIC32MZ DA family, featuring a 200 MHz CPU core, 2 MB of Flash program memory, and 640 KB of SRAM in a 288-pin LFBGA (15x15 mm) package. It delivers MCU-class integration with MPU-like graphics performance for embedded GUI, HMI, and connectivity-rich applications. A 32-bit microcontroller (MCU) is a single-chip processor that integrates a CPU, program memory (Flash), data memory (SRAM), and a rich peripheral set on one die. The PIC32MZ DA family sits at the top of Microchip's PIC32 portfolio, positioned between general-purpose PIC32MX microcontrollers and higher-cost application processors. It is built around the MIPS32 microAptiv core, which adds DSP extensions and microMIPS code compression for efficient signal-processing workloads. The DA sub-family is further specialized for graphics and large-memory GUI designs, integrating a Graphics LCD Controller and an external DDR2 DRAM interface. Key features include 2 MB (2M x 8) Flash, 640 KB SRAM, a 12-bit ADC with up to 45 analog channels, six UART, four SPI, four I2C, two I2S, two CAN, and a High-Speed USB 2.0 OTG controller. The integrated Graphics Controller drives TFT panels up to WXGA, while the DDR2 controller addresses up to 128 MB of external SDRAM, enabling framebuffer-rich graphical user interfaces. Architecturally, the PIC32MZ2025DAB288 uses a 5-stage MIPS32 microAptiv pipeline with FPU and MMU, capable of 1.52 DMIPS/MHz and 3.49 CoreMark/MHz. Its Peripheral Pin Select (PPS) remapping allows flexible routing of digital peripherals to any GPIO, simplifying PCB routing in dense 288-ball BGA designs. Hardware crypto accelerators, true random number generator, and a dual-bank Flash with live update support make it suitable for secure, field-upgradable industrial products. Typical applications include industrial HMI panels, medical patient-monitoring displays, automotive infotainment, building automation touch panels, and any embedded GUI requiring rich graphics without moving to a Linux-class application processor. When designing with this device, allocate adequate PCB area for the 288-ball LFBGA fan-out and follow Microchip's DDR2 layout guidelines (matched-length traces, reference planes, decoupling) to achieve the rated 200 MHz system clock. This page synthesizes verified distributor pricing, drop-in alternatives, and practical design notes that complement - and are not found in - the manufacturer datasheet alone.

Devis Contact
PIC32MZ2025DAG169T-I/6J - 32-bit 200MHz MCU, 2MB Flash | Microchip
PIC32MZ2025DAG169T-I/6J

PIC32MZ2025DAG169T-I/6J - 32-bit 200MHz MCU, 2MB Flash | Microchip

The Microchip Technology PIC32MZ2025DAG169T-I/6J is a high-integration 32-bit MIPS microcontroller from the PIC32MZ Graphics (DA) family, featuring a MIPS32 microAptiv core running up to 200 MHz with 2 MB of Flash and approximately 640 KB of SRAM, housed in a 169-ball LFBGA (11x11 mm) package. It is qualified for the industrial -40C to +85C temperature range and operates from 1.7 V to 3.6 V, supporting the on-chip DDR2 DRAM controller that can address up to 128 MB of external DDR2 memory for graphics buffering. A 32-bit microcontroller (MCU) is a single-chip processor that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals on one die. The PIC32MZ DA family in particular extends the MCU concept toward MPU-like capability by integrating a graphics controller, a graphics processor, dual display interfaces, and a DDR2 memory controller, placing it in the hierarchy: PIC32MZ DA -> 32-bit MCU -> microcontroller -> embedded processor -> semiconductor. This positioning lets engineers build graphical HMI products on a single MCU without a separate application processor. Key features of the PIC32MZ2025DAG169T-I/6J include a 12-bit 18 MSPS ADC with up to 45 analog inputs, a high-speed USB 2.0 OTG controller, two CAN modules, an integrated graphics controller with dedicated GPU for TFT displays, support for WQVGA/QVGA LCD panels, up to 120 general-purpose I/O pins, and a 10/100 Ethernet MAC. The DDR2 controller and large on-chip memory make it a strong fit for buffer-rich GUI workloads where DDR memory is too costly or power-hungry to add externally. The 169-LFBGA package provides 120 GPIO pins and short on-die traces for the parallel RGB display interface, minimizing EMI and timing skew on the data bus. Industrial-grade screening (-40C to +85C) plus the DDR2 PHY support lets engineers deploy the part in factory-floor HMIs, building-automation touch panels, and other noisy environments that would defeat commercial-grade MCUs. Typical applications for this part include graphical human-machine interfaces (HMI) on industrial equipment, point-of-sale terminals, automotive infotainment prototypes, medical patient monitors, and smart-home control panels. Designers pick this specific 169-ball LFBGA -I/6J variant when the display bus must be routed on a compact PCB and when industrial temperature screening is required. When designing with this part, plan PCB fan-out for the 11x11 mm BGA carefully: route the DDR2 byte groups with matched-length traces and provide a 4-layer stack-up with continuous ground on layer 2 below the DDR signals. Also reserve boot-mode and JTAG pins correctly to enter the ICD3/ICD4 programming mode on first power-up. This page synthesizes distributor pricing, drop-in PIC32MZ DA alternatives from the same family, and practical PCB layout guidance not found in the manufacturer datasheet alone, helping engineers compare footprint-compatible options before committing to a BGA layout.

Devis Contact
PIC32MZ2025DAG176-I/2J - 200MHz 32-bit Graphics MCU, 2MB Flash | Microchip
PIC32MZ2025DAG176-I/2J

PIC32MZ2025DAG176-I/2J - 200MHz 32-bit Graphics MCU, 2MB Flash | Microchip

The Microchip PIC32MZ2025DAG176-I/2J is a 32-bit MIPS32 microAptiv graphics microcontroller from the PIC32MZ DA family, delivering 200 MHz CPU performance with 2 MB of Flash and 640 KB of SRAM in a 176-pin LQFP (20x20 mm) package with exposed pad. It integrates an on-chip 32 MB DDR2 DRAM controller, a dedicated Graphics Controller, and a hardware Graphics Processor, enabling MPU-class GUI performance in an MCU form factor. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a 32-bit processor core, program memory (Flash), working memory (SRAM), and a rich set of peripherals on one die. The PIC32MZ DA family sits at the high end of the MCU hierarchy - above 8-bit and 16-bit microcontrollers, below application processors (MPUs). Within the power management hierarchy of an embedded system, the MCU acts as the system-on-chip orchestrator that controls power sequencing, graphics rendering, communication interfaces, and user interaction in graphical HMI applications. Key features include 2 MB Live Update Flash for dual-image firmware upgrades, 640 KB SRAM, integrated DDR2 controller supporting up to 128 MB external addressable memory, 12-bit ADC modules with up to 18 Msps sampling rate, 200 MHz operation across -40C to +85C industrial temperature range, and a 6-channel hardware Graphics Processor that offloads draw operations from the CPU. The device supports VDDIO from 2.2V to 3.6V and VDDCORE from 1.7V to 1.9V, with extensive connectivity including USB, CAN, Ethernet, and multiple UART/SPI/I2C peripherals. Architecturally, the PIC32MZ2025DAG176-I/2J uses the MIPS32 microAptiv core with a 16 KB I-cache and 4 KB D-cache, a memory management unit, and a tightly coupled DDR2 interface. The integrated Graphics Controller includes hardware acceleration for line draw, block transfer, and alpha blending, allowing rich GUIs on TFT LCDs at low CPU overhead. A dedicated JPEG decoder and crypto engine (AES, SHA) are also present in the silicon. Typical applications include industrial HMI panels, medical patient monitors, automotive infotainment displays, point-of-sale terminals, home automation touch panels, and any GUI-driven embedded product that needs MPU-like graphics performance without the OS complexity of a Linux MPU. When designing with this MCU, allocate adequate PCB area for the DDR2 routing (controlled impedance, matched length pairs), provide robust decoupling on all VDDIO/VDDCORE pins, and use the Harmony 3 software framework and MPLAB Harmony Graphics Suite to accelerate firmware development. The Live Update Flash feature requires careful linker script configuration to manage dual-image A/B partitions. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, helping engineers evaluate the PIC32MZ2025DAG176-I/2J for new designs and identify pin-compatible replacements.

Devis Contact
PIC32MZ2025DAG176T-I/2J - 200MHz 32-Bit MCU 2MB Flash LQFP-176 | Microchip
PIC32MZ2025DAG176T-I/2J

PIC32MZ2025DAG176T-I/2J - 200MHz 32-Bit MCU 2MB Flash LQFP-176 | Microchip

The Microchip PIC32MZ2025DAG176T-I/2J is a high-performance 32-bit MIPS microcontroller from the PIC32MZ DA family, integrating 2MB Flash and 640KB SRAM in a 176-pin LQFP package. It runs the MIPS32 microAptiv core at 200 MHz, integrates an LCD controller, graphics controller with 2D GPU, 12-bit 18 MSPS ADC with up to 45 analog inputs, and supports HS USB plus CAN. The device is offered in 176-LQFP (20x20) with -40C to +85C industrial grade operating range. The trailing /2J denotes tape and reel packaging; T indicates the tape-and-reel orientation variant. According to the Microchip PIC32MZ DA family datasheet and distributor listings (DigiKey 7354694, LCSC C632945), this part targets graphical HMI and connectivity-rich embedded designs with MPU-class compute headroom on a single MCU. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a 32-bit CPU core, Flash program memory, SRAM data memory, and a rich peripheral set (ADC, timers, communication controllers, GPIO). The PIC32MZ DA family sits in the hierarchy: 32-bit MCU -> microcontroller -> embedded processor -> semiconductor IC. It combines the ease-of-use of an MCU with MPU-class performance, blurring the line between traditional MCUs and application processors. Key features include MIPS32 microAptiv core at 200 MHz with 5-stage pipeline, 2MB Flash, 640KB SRAM, integrated graphics controller + GPU for HMI acceleration, integrated LCD controller, 12-bit 18 MSPS ADC supporting up to 45 analog inputs, HS USB 2.0 with on-chip PHY, two CAN 2.0b controllers, and DDR2 DRAM external bus expansion (up to 128 MB addressable). The 176-LQFP package provides abundant I/O for parallel display, SDRAM, and analog sensor matrices. Architecturally, the PIC32MZ2025DAG176 uses a Harvard-style memory architecture with separate program and data buses, a tightly-coupled FPU, DSP extensions, and a dedicated graphics subsystem. The integrated GPU accelerates 2D rendering primitives (blit, blend, alpha), reducing CPU load for GUI workloads. The wide peripheral bandwidth (EBI + DDR2 + dual USB + dual CAN) means the device can drive a TFT display while simultaneously handling industrial protocols and sensor acquisition. Typical applications include industrial HMI panels with TFT LCD, graphical operator interfaces, automotive aftermarket infotainment, medical patient monitors, building automation touch panels, and connected IoT gateways. The integrated graphics controller eliminates the need for an external GPU for 2D UIs, simplifying the design. When designing with this MCU, plan the PCB layout to keep the DDR2 traces length-matched within the 176-LQFP breakout, route the high-speed USB D+/D- as a 90-ohm differential pair, and reserve a 4-layer stack with continuous ground planes for analog noise isolation. The internal ADC benefits from a low-noise LDO such as Microchip MCP1700 for the AVdd rail. This page synthesizes distributor pricing (LCSC $8.18, DigiKey market data), same-brand drop-in alternatives from the PIC32MZ DA family, and practical HMI design notes not consolidated in the manufacturer datasheet alone.

Devis Contact
PIC32MZ2025DAH169T-I/6J - 200MHz 32-Bit MCU 2MB Flash | Microchip
PIC32MZ2025DAH169T-I/6J

PIC32MZ2025DAH169T-I/6J - 200MHz 32-Bit MCU 2MB Flash | Microchip

The Microchip Technology PIC32MZ2025DAH169T-I/6J is a high-performance 32-bit MIPS32 microAptiv PIC microcontroller from the PIC32MZ DA family, featuring a 200MHz core, 2MB Flash, and 640KB SRAM integrated in a 169-ball LFBGA (11x11mm) package. It is purpose-built for graphics-rich embedded applications, integrating a dedicated Graphics Controller, Graphics Processor, and on-chip DDR2 DRAM controller that supports up to 128MB of external DDR2 memory for high-resolution GUI designs. A 32-bit microcontroller (MCU) is an embedded processor that executes instructions 32 bits wide in a single clock cycle, offering higher throughput than 8-bit or 16-bit MCUs. PIC32 microcontrollers sit within the broader hierarchy: 32-bit MCU -> embedded microcontroller -> microprocessor -> semiconductor. The PIC32MZ DA sub-family further specializes this hierarchy by adding an integrated DDR memory controller and graphics peripherals, making it a hybrid MCU/MPU device aimed at GUI and HMI workloads. Key specifications include: 200MHz core clock, 2MB on-chip Flash (2M x 8), 640KB SRAM, 12-bit ADC with up to 18 MSPS conversion rate and up to 45 analog inputs, integrated HS USB, CAN, and a TFT/GPU graphics pipeline. The wide integration allows BOM reduction by eliminating external memory-controller glue logic and discrete graphics accelerators, which is critical for cost-sensitive consumer and industrial HMI designs. The device is fabricated on a low-power CMOS process and operates from a 1.8V core / 3.3V I/O supply. Per the Microchip product page, the PIC32MZ DA series offers MPU-like performance with the ease of design of an MCU, simplifying firmware development while delivering enough headroom for full-color WVGA or higher graphical user interfaces. Typical applications include industrial HMI panels, medical patient-monitoring displays, automotive infotainment clusters, home-automation touch panels, and point-of-sale terminals. The integrated DDR2 controller and graphics engine make it especially suitable wherever a TFT-LCD display of 4.3 inches or larger is required. When designing with this part, allocate PCB area for the 169-ball LFBGA (11x11mm) footprint, follow Microchip's DDR2 layout guidelines for the external memory bus, and verify display timing against the chosen TFT panel's datasheet. The "T" suffix indicates tape-and-reel packaging for high-volume assembly. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design considerations not found in the manufacturer datasheet, providing information gain beyond Microchip's standard product page.

Devis Contact
PIC32MZ2025DAH176-I/2J - 200MHz 32-bit MCU with 2MB Flash | Microchip
PIC32MZ2025DAH176-I/2J

PIC32MZ2025DAH176-I/2J - 200MHz 32-bit MCU with 2MB Flash | Microchip

The Microchip Technology PIC32MZ2025DAH176-I/2J is a 32-bit MIPS32 microAptiv PIC32MZ DA microcontroller operating at 200 MHz, integrating 2 MB (2M x 8) Flash program memory and 256 KB SRAM in a 176-pin LQFP (20x20 mm) package with an exposed thermal pad. It targets MPU-class performance in an MCU form factor, with an integrated Graphics Controller, dedicated Graphics Processor, on-chip 32 MB or externally addressable 128 MB DDR2 DRAM interface, 12-bit 18 MSPS ADC with up to 45 analog inputs, and high-speed connectivity including HS USB, CAN, Ethernet, I2S, SPI, I2C, and UART. A 32-bit microcontroller (MCU) is a single-chip computer whose CPU datapath, registers, and ALU are 32 bits wide, enabling high code density, large linear address spaces, and single-instruction throughput closer to that of a microprocessor than legacy 8- or 16-bit MCUs. Within the broader taxonomy, this part sits in the PIC32 family (32-bit MCU) under Microcontrollers (Integrated Circuits), and the PIC32MZ DA sub-family adds an integrated 2D graphics engine and stacked DDR2 DRAM controller so that the device can drive TFT LCD panels without an external graphics ASIC or memory. Key features include 200 MHz CPU core, 2 MB Flash, 256 KB SRAM, integrated DDR2 controller and Graphics Processor, 12-bit ADC at 18 MSPS, HS USB 2.0 OTG, dual CAN, 10/100 Ethernet MAC, up to 45 analog inputs, and 120 GPIO. The 176-LQFP exposed pad gives an industrial-grade thermal path for sustained graphics workloads. Architecturally, the PIC32MZ DA uses a 5-stage MIPS32 microAptiv pipeline with single-cycle MAC, hardware multiply/divide, and a dedicated GPU block that offloads primitives and fills so the CPU is free to run application logic and the RTOS. Typical applications include HMI/GUI with TFT LCD, industrial control panels, automotive infotainment, smart appliances, and medical patient-interface displays. Choose this device when you need MCU simplicity with MPU-class graphics and multimedia throughput. For design, place at least one 0.1 µF decoupling cap per VDD pin, keep DDR2 traces length-matched per the DDR2 layout guide, and use the exposed pad with a continuous ground copper pour to meet thermal targets. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone Microchip datasheet.

Devis Contact
PIC32MZ2025DAH176T-I/2J - 32-bit 200MHz MCU, 2MB Flash, Graphics, 176-LQFP | Microchip
PIC32MZ2025DAH176T-I/2J

PIC32MZ2025DAH176T-I/2J - 32-bit 200MHz MCU, 2MB Flash, Graphics, 176-LQFP | Microchip

The Microchip Technology PIC32MZ2025DAH176T-I/2J is a 32-bit MIPS32 microAptiv PIC32MZ DA series microcontroller running at 200 MHz, integrating 2 MB Flash and 640 KB SRAM with on-chip stacked DDR2 DRAM, an integrated graphics controller, and a dedicated graphics processor in a 176-pin LQFP (20x20 mm) package with exposed thermal pad. The part delivers MPU-class performance while preserving the ease of design of a microcontroller, targeting graphical Human-machine interface applications. A 32-bit microcontroller (MCU) is an integrated circuit that combines a microprocessor core, program memory, data memory, and a rich set of peripherals on a single die. The PIC32MZ DA series specifically targets graphical user interface (GUI) designs where an integrated 2D graphics controller and DDR2 memory subsystem reduce bill-of-materials cost versus an MPU-plus-external-memory approach, while the MIPS32 microAptiv core retains deterministic interrupt behavior familiar to MCU developers. Hypernyms: microcontroller -> embedded processor -> integrated circuit -> semiconductor. Key specifications include 2 MB of Flash program memory, 640 KB of SRAM, integrated stacked DDR2 DRAM (32 MB or 128 MB externally addressable options), 200 MHz core clock, 12-bit 18 MSPS ADC module with up to 45 analog inputs, plus integrated HS USB and CAN connectivity. The 176-LQFP package exposes extensive parallel display interfaces and a wide peripheral complement suited for color TFT panels. Tape-and-reel packaging supports high-volume assembly. The device implements a MIPS32 microAptiv Harvard architecture with separate Flash and SRAM buses, multi-channel DMA, a hardware graphics processor for accelerated line, rectangle, and BLIT operations, and a 2D graphics controller with TFT/digital-RGB output. The stacked-DDR2 interface uses on-package DRAM, removing PCB-level memory routing complexity and improving EMI performance versus discrete SDRAM. Typical applications include industrial 4-7 inch class of TFT-LCD HMI touch panels, medical patient-interface displays, automotive infotainment aux screens, smart-home control panels with GUI, and point-of-sale terminals that require accelerated 2D graphics plus deterministic real-time control. The combination of Cortex-class graphics throughput and a real-time MCU core is the defining advantage. Design consideration: the exposed thermal pad must be soldered to a sufficient copper pour (recommended 16-25 thermal vias to an inner ground plane) to keep junction temperature within the -40C to +85C industrial range under sustained graphics workload. This page synthesizes distributor pricing, drop-in same-package alternatives from the PIC32 MZ DA family, and practical design notes not found in the standalone manufacturer datasheet.

Devis Contact
PIC32MZ2025DAK169-I/HF - 200MHz 32-bit MCU, 2MB Flash, 169-LFBGA | Microchip
PIC32MZ2025DAK169-I/HF

PIC32MZ2025DAK169-I/HF - 200MHz 32-bit MCU, 2MB Flash, 169-LFBGA | Microchip

The Microchip Technology PIC32MZ2025DAK169-I/HF is a high-performance 32-bit MIPS32 microAptiv PIC microcontroller running at 200 MHz, featuring 2 MB of Flash, 640 KB of SRAM, and an integrated graphics controller with dedicated graphics processor, designed for graphical user-interface (GUI) applications. It is housed in a 169-ball LFBGA package measuring 11x11 mm, supports 1.8V core operation, and includes HS USB, Ethernet, CAN, and DDR2 DRAM controller (32 MB or 128 MB externally addressable). The device also integrates a 12-bit 18 MSPS ADC with up to 45 analog inputs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and programmable peripherals into one package. The PIC32MZ DAK family sits in the high-end graphics tier of Microchip's 32-bit portfolio, positioned between general-purpose MCUs and microprocessors (MPUs). It is purpose-built for embedded HMI designs that need rich graphics without the complexity of running a full Linux stack on an MPU. Key features of the PIC32MZ2025DAK169-I/HF include: 32 KB instruction cache and 32 KB data cache for predictable real-time performance, a 200 MHz core with 330 DMIPS throughput, a TFT LCD controller with dedicated DMA for low-CPU-overhead display refresh, and a 32-bit external DDR2 memory interface for large frame buffers. The integrated graphics processor accelerates primitives, alpha blending, color conversion, and image scaling, offloading tasks that would otherwise consume significant MIPS. Architecturally, the part uses the MIPS32 microAptiv core with DSP and microMIPS support, giving designers an instruction-efficient RISC pipeline. The combination of hardware graphics acceleration, large on-chip memory, and high-speed connectivity (HS USB, Ethernet, CAN) makes it a strong fit for self-contained industrial and consumer HMIs. Typical applications include industrial control HMI panels, home appliance graphical interfaces, automotive instrument clusters, medical device UIs, and IoT gateways with local displays. It is also suitable for building automation touch panels and point-of-sale terminals. When designing with this MCU, pay careful attention to PCB layout for the 169-ball BGA - via-in-pad is typically required and DDR2 routing must follow matched-length rules. Power sequencing for the 1.8V core rail and DDR2 termination must follow the datasheet guidelines to avoid POR issues. Programming is supported by MPLAB X IDE with the Harmony v3 framework. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet, providing engineers and procurement teams with a single source for engineering decisions on the PIC32MZ2025DAK169-I/HF.

Devis Contact
PIC32MZ2025DAK169-V/HF - 200MHz 32-bit MCU, 2MB Flash, Graphics, V-temp | Microchip
PIC32MZ2025DAK169-V/HF

PIC32MZ2025DAK169-V/HF - 200MHz 32-bit MCU, 2MB Flash, Graphics, V-temp | Microchip

The Microchip Technology PIC32MZ2025DAK169-V/HF is a 32-bit MIPS32 microAptiv PIC32MZ DAK graphics microcontroller running at 200 MHz, integrating 2 MB of Flash and 640 KB of SRAM in a 169-pin LFBGA (11x11 mm) package for V-temperature (-40C to +105C) applications. The part delivers MPU-class performance with MCU-class design simplicity, targeting graphical HMI, industrial control, and connectivity-rich embedded platforms. A 32-bit microcontroller (MCU) is a single-chip processor that integrates a high-throughput CPU, on-chip memory (Flash for code, SRAM for data), and a broad set of peripherals (ADC, timers, communication controllers, GPIO). The PIC32MZ family extends the classic PIC microcontroller lineage with a MIPS32 microAptiv core, instruction-cache architecture, and DMA, positioning these MCUs above 8/16-bit MCUs but below full microprocessors in complexity. The PIC32MZ Graphics (DAK/DAL/DAR/DAS) family specifically adds an integrated graphics controller, a graphics processor, and an external DDR2 DRAM interface to enable LCD-TFT panels up to WVGA without external graphics silicon. Key features of the PIC32MZ2025DAK169-V/HF include a 12-bit 18 MSPS ADC with up to 45 analog inputs, two CAN modules, HS USB with on-chip transceiver, an integrated graphics controller with hardware-accelerated rendering, and support for up to 32 MB on-chip or 128 MB externally addressable DDR2 DRAM. The 169-LFBGA package exposes the wide data path needed to drive parallel RGB displays and connect to external DDR2 memory. Architecturally, the device pairs a single-issue MIPS32 microAptiv core with tightly-coupled instruction cache and a dedicated graphics DMA path, allowing the CPU to remain responsive while the GPU streams frame-buffer data to the LCD. The 200 MHz core delivers 330 DMIPS and 3.46 CoreMark/MHz-class efficiency for the segment. Typical applications span industrial HMI panels with TFT LCDs, medical patient-monitoring displays, point-of-sale terminals, automotive-infotainment prototypes, and home-automation touch-screen controllers. Engineers select the DAK169 variant when the design needs a 169-ball BGA footprint for compact board layout and high-pin-count LCD interface routing. Designers should review the package thermal resistance, the DDR2 PCB layout rules, and the Graphics Controller middleware licensing before committing. The PIC32MZ Graphics Family datasheet (DS60001565) covers register definitions, the DDR2 controller timing, and the recommended LCD-TFT interface. This page synthesizes distributor pricing from DigiKey/Mouser/LCSC, the Microchip product family listing, and drop-in same-family alternatives sourced from the verified cross-reference data to help engineers compare, source, and qualify the part more efficiently than reading the 169-ball pinout alone.

Devis Contact
PIC32MZ2025DAK169T-I/HF - 200MHz, 2MB Flash MCU | Microchip
PIC32MZ2025DAK169T-I/HF

PIC32MZ2025DAK169T-I/HF - 200MHz, 2MB Flash MCU | Microchip

The Microchip Technology PIC32MZ2025DAK169T-I/HF is a 32-bit MIPS32 microAptiv PIC32MZ DAK microcontroller IC running at 200 MHz with 2MB (2M x 8) of Flash program memory, supplied in a 169-pin LFBGA (11x11 mm) package. It belongs to the PIC32MZ DA graphics-enabled family that targets MPU-class GUI workloads while preserving the ease-of-use of an MCU. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O on one die. PIC32MZ DA parts extend the MCU concept by adding an integrated Graphics Controller, Graphics Processor, and an external DDR2 DRAM interface (32 MB or 128 MB addressable), giving designers MPU-like rendering performance without an external application processor. The microAptiv core implements the MIPS32 instruction set with hardware multiply/divide and DSP extensions. Key features include a 12-bit 18 MSPS ADC module supporting up to 45 analog inputs, integrated High-Speed USB and CAN interfaces, and 640 KB of on-chip SRAM. The 200 MHz core delivers 330 DMIPS / 3.28 CoreMark/MHz, sufficient to drive WVGA-resolution TFT displays with full graphical overlays. AEC-Q100 qualification is not claimed on this industrial-grade (-40C to +85C, I-temp) variant, so for automotive dashboards select the corresponding V-temp or Q-grade part. Typical applications span industrial HMI touch panels, medical patient monitors, home-automation control hubs, and graphics-rich point-of-sale terminals. The integrated DDR2 controller removes the need for an external memory controller ASIC, reducing BOM cost and PCB area. Designers should follow Microchip application note AN1388 for PCB layout of the 169-LFBGA and DDR2 interface, and use the MPLAB Harmony 3 framework for driver and middleware support.

Devis Contact
PIC32MZ2025DAK169T-V/HF - 200MHz MCU 2MB Flash 169-LFBGA | Microchip
PIC32MZ2025DAK169T-V/HF

PIC32MZ2025DAK169T-V/HF - 200MHz MCU 2MB Flash 169-LFBGA | Microchip

The Microchip Technology PIC32MZ2025DAK169T-V/HF is a 32-bit MIPS32 microAptiv PIC32MZ DAK microcontroller running at 200 MHz with 2 MB of Flash and 640 KB of SRAM, housed in a 169-ball LFBGA (11x11 mm) package. It integrates a dedicated Graphics Controller, a Graphics Processor, and an interface for externally addressable DDR2 DRAM (32 MB or 128 MB), giving GUI designs MPU-class performance with the ease of an MCU. A 32-bit microcontroller (MCU) is an embedded processor that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals on a single die. Within the embedded hierarchy, an MCU sits below an MPU (which lacks on-chip Flash and typically requires external memory), and high-end graphical MCUs like the PIC32MZ DA series blur that line by adding external DDR2 memory interfaces, dedicated 2D graphics hardware, and TFT/LCD controllers, enabling direct driving of human-machine interface (HMI) panels without a separate graphics chip. Key differentiating features include a 12-bit ADC running at 18 MSPS with up to 45 analog inputs, integrated CAN and Hi-Speed USB (HS USB), and the V-temp operating range of -40C to +105C, which extends the industrial envelope for harsh environments. The 2 MB Flash and 640 KB SRAM allow large graphics framebuffers and rich application code to coexist on-chip, while the MIPS32 microAptiv core at 200 MHz delivers ample headroom for real-time GUI workloads. Architecturally, the PIC32MZ DAK combines a single-core MIPS32 microAptiv processor with a separate Graphics Processor block and DDR2 memory controller, offloading 2D rendering from the main CPU. This dual-engine approach is more efficient than running the GUI on the main core alone and reduces latency for animation-heavy HMI applications. The integrated TFT/LCD controller supports direct connection to common display resolutions, eliminating the need for an external graphics bridge. Typical applications include industrial HMI panels, automotive infotainment clusters, medical patient monitors, point-of-sale terminals, and home-automation touch panels where the 2 MB Flash, 640 KB SRAM, and 45 analog inputs can simultaneously drive a graphical display and interface with sensors. When designing with this device, allocate sufficient PCB area for the 169-ball LFBGA (11x11 mm) - it requires a 4-layer or higher stack-up with microvia fan-out for reliable assembly. Plan DDR2 routing first per the DDR2 design checklist in the manufacturer datasheet. This page synthesizes distributor pricing, drop-in PIC32MZ DA family alternatives, and practical design notes not found in the manufacturer datasheet alone.

Devis Contact
PIC32MZ2025DAK176-I/2J - 200MHz MCU 2MB Flash | Microchip
PIC32MZ2025DAK176-I/2J

PIC32MZ2025DAK176-I/2J - 200MHz MCU 2MB Flash | Microchip

The Microchip PIC32MZ2025DAK176-I/2J is a high-performance 32-bit MIPS32 microAptiv PIC microcontroller from the PIC32MZ DAK family, featuring a 200 MHz core, 2 MB Flash, and 640 KB SRAM in a 176-pin LQFP (20x20 mm) package with exposed pad. It integrates an on-chip DDR2 DRAM controller supporting 32 MB or 128 MB external DDR2 memory, a hardware Graphics Controller, a dedicated Graphics Processor, a 12-bit 18 MSPS ADC with up to 45 analog inputs, plus HS USB and CAN interfaces for connected-embedded designs. What is a PIC32MZ DAK microcontroller? The PIC32MZ DAK series combines MPU-class graphics performance with the simplicity of an MCU for GUI-rich human-machine interface (HMI) applications. It belongs to the MIPS32 microAptiv family, which sits in the broader taxonomy of 32-bit embedded controllers (microcontroller -> 32-bit MCU -> MIPS architecture -> microAptiv core). This combination makes it suited for systems that need rich graphics, fast ADC, and connectivity in a single chip. Key features include 200 MHz core clock, 2 MB Flash program memory, 640 KB SRAM, integrated DDR2 controller for external 32 MB or 128 MB DDR2, hardware Graphics Controller with dedicated Graphics Processor, 12-bit ADC at 18 MSPS with up to 45 analog input channels, HS USB 2.0, CAN 2.0, and a wide set of serial peripherals (UART, SPI, I2C). The 176-LQFP package with exposed pad improves thermal dissipation for full-speed operation. The device uses a 5-stage MIPS32 microAptiv pipeline with DSP extensions, single-cycle hardware multiply/accumulate, and a tightly-coupled SRAM subsystem for deterministic performance. The integrated DDR2 controller removes the need for an external memory controller, simplifying board design for graphics-heavy GUI applications. Typical applications include industrial HMI panels, automotive infotainment and cluster displays, medical patient monitors, point-of-sale terminals, smart home control panels, and any embedded GUI requiring hardware-accelerated graphics. The wide feature integration is particularly beneficial when system cost and PCB area must be minimized while still delivering smooth graphics rendering. When designing with this device, allocate sufficient PCB copper for the exposed thermal pad and follow the manufacturer's DDR2 layout guidelines (matched-length traces, controlled impedance, decoupling close to the DDR2 pins) to achieve the rated 200 MHz operation and reliable DDR2 reads/writes. This page synthesizes distributor pricing, drop-in alternatives within the PIC32MZ DAK/DA family, and practical design notes that supplement the manufacturer datasheet.

Devis Contact
PIC32MZ2025DAK176-V/2J - 32-bit MCU, 200MHz, 2MB Flash, Graphics | Microchip
PIC32MZ2025DAK176-V/2J

PIC32MZ2025DAK176-V/2J - 32-bit MCU, 200MHz, 2MB Flash, Graphics | Microchip

The Microchip PIC32MZ2025DAK176-V/2J is a 32-bit cache-based microcontroller from the PIC32MZ DA family featuring a MIPS32 microAptiv core running at 200 MHz, an integrated Graphics Controller and Graphics Processor, 2 MB of Flash, and 640 KB of SRAM, housed in a 176-pin LQFP (20x20 mm) package. It targets GUI-centric embedded designs that demand MPU-class performance with MCU-class ease of integration. A 32-bit microcontroller (MCU) is a single-chip processor with on-chip Flash program memory, SRAM data memory, and a rich set of digital and analog peripherals. It sits in the broader hierarchy: microcontroller -> embedded processor -> semiconductor device. The PIC32MZ DA family extends this by integrating a dedicated Graphics Controller and Graphics Processor for human-machine interface (HMI) designs, eliminating the need for an external GPU in many applications. Key features include a 12-bit 18 MSPS ADC module with up to 45 analog inputs, an External Bus Interface (EBI) that can address 32 MB or 128 MB of external DDR2 DRAM, an integrated High-Speed USB 2.0 PHY, a CAN module, and 120 general-purpose I/O pins. The device operates from 1.7 V to 1.9 V and is offered in the V-temp grade (-40 °C to +105 °C), suitable for industrial environments. Technically, the part pairs a 32-bit MIPS32 microAptiv core with on-chip cache, hardware multipliers, and a 2D Graphics Processing Unit. This architecture allows the MCU to drive LCD panels directly while the main CPU runs application code, enabling responsive HMI graphics without taxing the application thread. Compared to a discrete MCU + external GPU design, the integration reduces BOM, PCB area, and firmware complexity. Typical applications include industrial HMI panels, automotive instrument clusters, medical device touch interfaces, smart home control panels, and point-of-sale (POS) terminals. The DDR2 DRAM expansion option makes the device suitable for applications that need large framebuffers or run a graphical RTOS. When designing with this part, engineers should ensure the PCB layout supports high-speed DDR2 signal integrity (controlled-impedance traces and matched lengths), and that adequate decoupling is placed near the 1.8 V core supply pins. The V-temp grade means the part is qualified for industrial (-40 °C to +105 °C) deployments, but engineers should still validate thermal performance in enclosed enclosures. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, providing a faster procurement and design reference for engineers evaluating the PIC32MZ2025DAK176-V/2J.

Devis Contact
PIC32MZ2025DAK176T-I/2J - 200MHz 32-bit MCU 2MB Flash LQFP-176 | Microchip
PIC32MZ2025DAK176T-I/2J

PIC32MZ2025DAK176T-I/2J - 200MHz 32-bit MCU 2MB Flash LQFP-176 | Microchip

The Microchip PIC32MZ2025DAK176T-I/2J is a 32-bit MIPS32 microAptiv microcontroller in the PIC32MZ DAK graphics family, integrating 2 MB of Flash and 640 KB of SRAM in a 176-pin LQFP exposed-pad package. It operates at up to 200 MHz with a 1.8 V core supply and is qualified for the -40C to +85C industrial temperature range. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and programmable peripherals. The PIC32MZ DAK family sits in the PIC32MZ hierarchy -> 32-bit PIC MCUs -> microcontroller -> embedded processing IC -> semiconductor, and is specifically aimed at high-performance graphical user interface (GUI) applications. This places the part in the broader category of integrated circuits used for embedded control and human-machine interfaces. Key specifications include 200 MHz CPU clock, 2 MB (2M x 8) Flash, 640 KB SRAM, an integrated 32-bit graphics controller with up to 128 MB externally addressable DDR2 DRAM support, a 12-bit 18 MSPS ADC with up to 45 analog inputs, HS USB, CAN, and a 176-pin LQFP (20x20) package with exposed thermal pad. These features make the device well suited for driving color TFT displays and running complex graphical stacks such as Microchip's MPLAB Harmony Graphics Suite. The DAK series is built on a MIPS32 microAptiv core with a five-stage pipeline, instruction and data caches, and tightly-coupled memory for deterministic real-time performance. A dedicated graphics processor unit offloads rendering tasks such as blitting, alpha blending, and chroma keying, freeing the CPU for application logic and communications. High-speed USB 2.0, dual CAN, and multiple SPI/I2C/UART instances give the device abundant connectivity for industrial networking. Typical applications include industrial HMI panels with TFT LCD, medical patient monitors, home appliance touchscreen controllers, automotive infotainment displays, and graphical data acquisition systems. The 2 MB Flash comfortably hosts the MPLAB Harmony graphics library plus a rich RTOS and application code, while the external DDR2 interface supports frame buffers for large color displays. When designing with this part, pay attention to the DDR2 PCB layout - matched impedance, length-matched traces, and proper decoupling are essential for stable memory operation. Power sequencing between the 1.8 V core, 3.3 V I/O, and the DDR2 supply must follow the datasheet order to avoid latch-up. Use the exposed thermal pad with an adequate copper pour to keep junction temperature within limits at full 200 MHz operation. This page synthesizes distributor pricing, drop-in alternatives from the same PIC32MZ DAK family, and practical design notes not collected in one place in the manufacturer datasheet.

Devis Contact
PIC32MZ2025DAK176T-V/2J - 200MHz MCU, 2MB Flash, Graphics | Microchip
PIC32MZ2025DAK176T-V/2J

PIC32MZ2025DAK176T-V/2J - 200MHz MCU, 2MB Flash, Graphics | Microchip

The Microchip Technology PIC32MZ2025DAK176T-V/2J is a 32-bit MIPS32 microAptiv PIC microcontroller engineered for graphical HMI applications, integrating a 200 MHz CPU core with 2 MB Flash and 640 KB SRAM, and packaged in a 176-pin LQFP (20x20 mm) footprint. According to the Microchip product page, this part belongs to the PIC32MZ DA family with graphics acceleration, supporting on-chip 32 MB or externally addressable 128 MB DDR2 DRAM, an integrated Graphics Controller, and a dedicated Graphics Processor. A 32-bit MCU (microcontroller unit) is a single-chip processor that integrates a CPU core, memory, and peripherals on one die. The PIC32MZ DA series sits at the high end of the MCU hierarchy: MCU -> 32-bit MCU -> MIPS-based MCU -> PIC32 family -> PIC32MZ DA graphics family. Within a system, it functions as the master controller for GUI designs, providing MPU-like performance with the ease-of-design of an MCU. Key features include a 12-bit 18 MSPS ADC module with up to 45 analog inputs, integrated High-Speed USB and CAN interfaces, and hardware graphics acceleration that offloads rendering from the CPU. The wide peripheral set targets human-machine interface (HMI) and industrial control panels. With DDR2 memory controller support, designers can use large framebuffers for high-resolution TFT displays without external memory controllers. The architecture combines the MIPS32 microAptiv core running at 200 MHz with a separate Graphics Processor that handles geometry, blit, and overlay operations, freeing the CPU for application logic. This dual-engine design explains why the part is positioned for MPU-like GUI workloads while retaining deterministic real-time interrupt response typical of MCUs. Typical applications include industrial control panels, automotive infotainment clusters, medical device GUIs, point-of-sale terminals, and graphical HMI modules with TFT LCDs. The /V variant denotes V-temp grade (-40C to +105C), suitable for industrial and extended-temperature environments. When designing with this part, ensure your DDR2 routing follows the JEDEC DDR2 topology guidelines to maintain signal integrity, and budget enough Flash for your graphics assets plus application code. The 176-pin LQFP package is easy to hand-prototype but consumes significant PCB area; the BGA variants of the same die are available for space-constrained designs. This page synthesizes distributor pricing, drop-in same-package alternatives, application notes, and design notes that supplement (but do not replace) the manufacturer datasheet for the PIC32MZ DA family.

Devis Contact
PIC32MZ2025DAL169-I/HF - 32-bit 200MHz MCU 2MB Flash | Microchip
PIC32MZ2025DAL169-I/HF

PIC32MZ2025DAL169-I/HF - 32-bit 200MHz MCU 2MB Flash | Microchip

The Microchip Technology PIC32MZ2025DAL169-I/HF is a 32-bit MIPS32 microAptiv PIC32MZ DAL graphics microcontroller running at 200 MHz, integrating 2 MB of Flash and 640 KB of SRAM in a 169-pin LFBGA (11x11 mm) package. It is designed to deliver MPU-class performance with MCU-class ease of use for graphical user interfaces and embedded display applications. The device features on-chip support for up to 128 MB of externally addressable DDR2 DRAM, providing the memory bandwidth required for high-resolution TFT-LCD driving and smooth GUI rendering. A microcontroller (MCU) is an integrated circuit that combines a processor core, program and data memory, peripherals, and I/O on a single die. The PIC32MZ DAL family extends this concept by integrating a dedicated Graphics Controller, Graphics Processor, and DDR2 memory interface, positioning the part as a system-on-chip for HMI (human-machine interface) designs. The 32-bit MIPS microAptiv core delivers 1.59 DMIPS/MHz with single-cycle multiply, DSP extensions, and a double-precision FPU, enabling efficient handling of complex graphics stacks such as Microchip's MPLAB Harmony and Segger emWin. Key features include a 12-bit 18 MSPS ADC module supporting up to 45 analog inputs, a 9-bit 200 kHz GPU/display pipeline, integrated High-Speed USB 2.0 with PHY, two CAN 2.0b modules, 10/100 Ethernet MAC with IEEE 1588 PTP support, and multiple communication peripherals including UART, SPI, I2C, I2S, and SQI. The PIC32MZ DA family shares the same peripherals and pinout across memory variants, allowing designers to scale memory (2 MB, 1 MB, 512 KB Flash) without board rework. Typical applications include industrial HMI panels, medical device displays, automotive instrument clusters, smart home control panels, point-of-sale terminals, and portable instrumentation. The wide integration minimizes external components, reducing BOM cost and PCB area in compact graphical products. Compared to using a discrete host MCU plus external GPU, the PIC32MZ DAL reduces system complexity while preserving the deterministic real-time behavior required in industrial and medical environments. When designing with this device, allocate adequate PCB area for the 11x11 mm BGA fanout and ensure proper DDR2 PCB routing with controlled-impedance traces, length-matched DQS signals, and a solid ground reference plane. Use Microchip's MPLAB Harmony Configurator (MHC) to initialize the DDR2 controller and graphics stack; an improper sequence can prevent the controller from completing calibration and lock the display pipeline.

Devis Contact