1EDI20I12MFXUMA1 vs 2ED21064S06JXUMA1 Comparaison
Comparaison détaillée côte à côte de 1EDI20I12MFXUMA1 par Infineon et 2ED21064S06JXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | 1EDI20I12MFXUMA1 | 2ED21064S06JXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,84 | $0,85 |
| Fonction | Isolated single-channel high-side gate driver | High-Side and Low-Side Gate Driver |
| Isolation Type | Galvanic (coreless transformer) | — |
| Number of Channels | 1 | — |
| Output Current (Source/Sink) | 2 A peak | — |
| Active Miller Clamp Current | 2 A | — |
| Maximum Operating Voltage (Switch side) | 1200 V | — |
| Propagation Delay (typ.) | 300 ns | — |
| Input Logic | Inverting / Non-inverting | — |
| Configuration de sortie | Single high-side driver | — |
| Minimum Creepage | 4 mm | — |
| Short Circuit Protection | Yes (clamping) | — |
| Boîtier | PG-DSO-8-51 (8-pin DSO, 4 mm creepage) | PG-DSO-14 (14-pin SOIC) |
| Type de montage | Surface Mount | Surface Mount |
| Température de fonctionnement | [DATA_NEEDED: operating temperature range] | -40C to +125C |
| Supply Voltage (Secondary) | [DATA_NEEDED: secondary supply voltage range] | — |
| CMTI | [DATA_NEEDED: common-mode transient immunity] | — |
| UVLO | Yes (secondary side) | — |
| Statut RoHS | Compliant | ROHS3 Compliant |
| Configuration | — | Half-Bridge (2 outputs, non-inverting) |
| Topologie | — | High-Side, Low-Side with integrated bootstrap diode |
| Maximum Offset / Boot Voltage | — | 650 V |
| Supply Voltage (VCC) | — | 10 V to 20 V |
| Source Current (typical) | — | 0.29 A |
| Sink Current (typical) | — | 0.7 A |
| Rise Time (typical) | — | [DATA_NEEDED: rise time] |
| Fall Time (typical) | — | [DATA_NEEDED: fall time] |
| Propagation Delay (typical) | — | 100 ns |
| Channel-to-Channel Delay Match | — | [DATA_NEEDED: channel-to-channel delay match] |
| Under-Voltage Lockout | — | Yes (both channels) |
| Bootstrap Diode | — | Integrated |
| Input Logic Compatibility | — | 3.3 V / 5 V CMOS |
| Niveau MSL | — | [DATA_NEEDED: MSL level] |
| Negative Gate Drive Robustness | — | -0.7 V |