10CL025YE144A7G - Cyclone 10 LP FPGA 25K LE, 76 I/O, EQFP-144 | Intel
Référence : 10CL025YE144A7G ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $9.26 | $9,26 |
| 10 | $8.42 | $84,20 |
| 100 | $7.65 | $765,00 |
| 500 | $6.95 | $3 475,00 |
| 1 000 | $6.3 | $6 300,00 |
10CL025YE144A7G Présentation
An FPGA (Field-Programmable Gate Array) is a semiconductor integrated circuit composed of configurable logic blocks (CLBs), programmable interconnects, and dedicated hard IP blocks such as multipliers, memory blocks, and phase-locked loops (PLLs). Unlike a fixed-function ASIC, an FPGA's logic function is defined after manufacture through a hardware description language (HDL) bitstream, enabling rapid prototyping, field upgrades, and design reuse. FPGAs sit in the broader hierarchy of programmable logic devices (PLDs) -> FPGAs -> low-power FPGAs, serving applications where custom logic, parallel processing, and reconfigurable I/O are required.
Key features of the 10CL025YE144A7G include 24,624 logic elements organized into adaptive logic modules (ALMs), 594 kbit of embedded SRAM (M9K blocks), up to 66 embedded 18x18 multipliers, 4 general-purpose PLLs, and support for external memory interfaces including DDR3, DDR2, and LPDDR2. The device supports common I/O standards such as LVDS, LVCMOS, SSTL, and HSTL via 76 general-purpose I/O pins. Configuration is achieved through an industry-standard serial (AS) or JTAG interface using the Quartus Prime design toolchain.
From an architectural standpoint, the Cyclone 10 LP family uses a low-power SRAM-based configuration cell backed by non-volatile flash configuration memory, providing instant-on behavior without an external boot PROM. The core fabric operates at 1.2 V with separate PLL and I/O bank supplies, and the device integrates a hard Memory Controller and PCIe Gen1 controller (soft IP supported in the fabric). This combination delivers ASIC-like deterministic timing at low static power, making the family suitable for industrial, automotive, and battery-powered edge applications.
Typical applications include industrial machine vision, motor control and robotics, video processing and display bridging, factory automation PLCs, low-power IoT gateways, and portable medical instrumentation. The 144-pin EQFP package provides ample I/O for parallel sensor aggregation while keeping board area and BOM cost low.
When designing with the 10CL025YE144A7G, ensure that each I/O bank has its own VCCIO supply matching the connected logic-level standard, and that the GND and core VCC pins are properly decoupled with 100 nF and 10 uF capacitors placed as close to the package as possible. The exposed thermal pad must be soldered to a continuous ground plane for thermal and electrical performance.
This page synthesizes distributor pricing from DigiKey, Mouser, Arrow, and LCSC, alongside drop-in alternative FPGAs, design notes, and parametric comparisons - information not aggregated in the official Altera/Intel datasheet.
Alternatives de remplacement direct pour 10CL025YE144A7G — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec 10CL025YE144A7G (même facteur de forme et même empreinte) — différant par Package, Operating Temperature, Embedded Memory, Logic Elements (LE), Process Technology.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
10CL016YE144A7G
✅ Remplacement direct✓ En stock
$27.95 / unité
Voir la fiche technique →10CL025YE144C8G
✅ Remplacement direct✓ En stock
$36.85 / unité
Voir la fiche technique →10CL025YE144C6G
✅ Remplacement direct✓ En stock
$21.89 / unité
Voir la fiche technique →10CL025YE144I7G
✅ Remplacement direct✓ En stock
$35.8 / unité
Voir la fiche technique →10CL010YE144A7G
✅ Remplacement direct✓ En stock
$19.4 / unité
Voir la fiche technique →LFE5U-25F-8BG256C
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
10CL025YE144A7G Valeurs maximales et caractéristiques électriques
| Family | Cyclone 10 LP |
| Logic Elements | 24,624 LE |
| Embedded Memory | 594 kbit (M9K blocks) |
| Embedded 18x18 Multipliers | 66 |
| General-Purpose PLLs | 4 |
| User I/O Count | 76 |
| Boîtier | 144-pin EQFP (Plastic Enhanced QFP) with exposed pad |
| Core Supply Voltage (VCCINT) | 1.2 V |
| Plage de température de fonctionnement | 0 C to 85 C (commercial, A7 suffix) |
| Speed Grade | -7 |
| Process Technology | Low-power 60 nm |
| Configuration Memory | On-chip flash (instant-on, no external boot PROM) |
| Type de montage | Surface Mount |
| Packaging | Tray |
| Statut RoHS | Compliant |
Configuration des broches de 10CL025YE144A7G
| Broche 1 | I/O_BANK_1A — General-purpose I/O, bank 1A |
| Broche 2 | I/O_BANK_1A — General-purpose I/O, bank 1A |
| Broche 3 | I/O_BANK_1A — General-purpose I/O, bank 1A |
| Broche 4 | I/O_BANK_1A — General-purpose I/O, bank 1A |
| Broche 5 | GND — Ground reference |
| Broche 6 | I/O_BANK_1A — General-purpose I/O, bank 1A |
| Broche 7 | I/O_BANK_1A — General-purpose I/O, bank 1A |
| Broche 8 | I/O_BANK_1A — General-purpose I/O, bank 1A |
| Broche 9 | I/O_BANK_1A — General-purpose I/O, bank 1A |
| Broche 10 | VCCIO1A — I/O supply, bank 1A |
| Broche 11 | I/O_BANK_1B — General-purpose I/O, bank 1B |
| Broche 12 | I/O_BANK_1B — General-purpose I/O, bank 1B |
| Broche 13 | GND — Ground reference |
| Broche 14 | I/O_BANK_1B — General-purpose I/O, bank 1B |
| Broche 15 | I/O_BANK_1B — General-purpose I/O, bank 1B |
| Broche 16 | VCCIO1B — I/O supply, bank 1B |
| Broche 17 | I/O_BANK_2 — General-purpose I/O, bank 2 |
| Broche 18 | I/O_BANK_2 — General-purpose I/O, bank 2 |
| Broche 19 | I/O_BANK_2 — General-purpose I/O, bank 2 |
| Broche 20 | I/O_BANK_2 — General-purpose I/O, bank 2 |
| Broche 21 | GND — Ground reference |
| Broche 22 | I/O_BANK_2 — General-purpose I/O, bank 2 |
| Broche 23 | I/O_BANK_2 — General-purpose I/O, bank 2 |
| Broche 24 | VCCIO2 — I/O supply, bank 2 |
| Broche 25 | I/O_BANK_3 — General-purpose I/O, bank 3 |
| Broche 26 | I/O_BANK_3 — General-purpose I/O, bank 3 |
| Broche 27 | GND — Ground reference |
| Broche 28 | I/O_BANK_3 — General-purpose I/O, bank 3 |
| Broche 29 | I/O_BANK_3 — General-purpose I/O, bank 3 |
| Broche 30 | VCCIO3 — I/O supply, bank 3 |
| Broche 31 | I/O_BANK_4 — General-purpose I/O, bank 4 |
| Broche 32 | I/O_BANK_4 — General-purpose I/O, bank 4 |
| Broche 33 | I/O_BANK_4 — General-purpose I/O, bank 4 |
| Broche 34 | I/O_BANK_4 — General-purpose I/O, bank 4 |
| Broche 35 | GND — Ground reference |
| Broche 36 | I/O_BANK_4 — General-purpose I/O, bank 4 |
| Broche 37 | VCCIO4 — I/O supply, bank 4 |
| Broche 38 | I/O_BANK_5 — General-purpose I/O, bank 5 |
| Broche 39 | I/O_BANK_5 — General-purpose I/O, bank 5 |
| Broche 40 | I/O_BANK_5 — General-purpose I/O, bank 5 |
| Broche 41 | GND — Ground reference |
| Broche 42 | I/O_BANK_5 — General-purpose I/O, bank 5 |
| Broche 43 | I/O_BANK_5 — General-purpose I/O, bank 5 |
| Broche 44 | VCCIO5 — I/O supply, bank 5 |
| Broche 45 | I/O_BANK_6 — General-purpose I/O, bank 6 |
| Broche 46 | I/O_BANK_6 — General-purpose I/O, bank 6 |
| Broche 47 | I/O_BANK_6 — General-purpose I/O, bank 6 |
| Broche 48 | I/O_BANK_6 — General-purpose I/O, bank 6 |
| Broche 49 | GND — Ground reference |
| Broche 50 | I/O_BANK_6 — General-purpose I/O, bank 6 |
| Broche 51 | VCCIO6 — I/O supply, bank 6 |
| Broche 52 | I/O_BANK_7 — General-purpose I/O, bank 7 |
| Broche 53 | I/O_BANK_7 — General-purpose I/O, bank 7 |
| Broche 54 | I/O_BANK_7 — General-purpose I/O, bank 7 |
| Broche 55 | GND — Ground reference |
| Broche 56 | I/O_BANK_7 — General-purpose I/O, bank 7 |
| Broche 57 | I/O_BANK_7 — General-purpose I/O, bank 7 |
| Broche 58 | VCCIO7 — I/O supply, bank 7 |
| Broche 59 | I/O_BANK_8 — General-purpose I/O, bank 8 |
| Broche 60 | I/O_BANK_8 — General-purpose I/O, bank 8 |
| Broche 61 | I/O_BANK_8 — General-purpose I/O, bank 8 |
| Broche 62 | I/O_BANK_8 — General-purpose I/O, bank 8 |
| Broche 63 | GND — Ground reference |
| Broche 64 | I/O_BANK_8 — General-purpose I/O, bank 8 |
| Broche 65 | VCCIO8 — I/O supply, bank 8 |
| Broche 66 | CLK0 — Dedicated clock input, positive |
| Broche 67 | CLK0n — Dedicated clock input, negative |
| Broche 68 | GND — Ground reference |
| Broche 69 | CLK1 — Dedicated clock input, positive |
| Broche 70 | CLK1n — Dedicated clock input, negative |
| Broche 71 | VCCAUX — Auxiliary supply (2.5 V) for PLLs |
| Broche 72 | GND — Ground reference |
| Broche 73 | nCONFIG — Configuration start (active-low) |
| Broche 74 | nSTATUS — Configuration status (active-low) |
| Broche 75 | CONFIG_DONE — Configuration complete (open-drain) |
| Broche 76 | GND — Ground reference |
| Broche 77 | TCK — JTAG test clock |
| Broche 78 | TMS — JTAG test mode select |
| Broche 79 | TDI — JTAG test data in |
| Broche 80 | TDO — JTAG test data out |
| Broche 81 | GND — Ground reference |
| Broche 82 | MSEL0 — Configuration mode select 0 |
| Broche 83 | MSEL1 — Configuration mode select 1 |
| Broche 84 | MSEL2 — Configuration mode select 2 |
| Broche 85 | AS_DATA0 — Active Serial data 0 |
| Broche 86 | AS_DATA1 — Active Serial data 1 |
| Broche 87 | AS_CLK — Active Serial clock |
| Broche 88 | AS_nCSO — Active Serial chip select (active-low) |
| Broche 89 | VCCINT — Core supply (1.2 V) |
| Broche 90 | GND — Ground reference |
| Broche 91 | VCCINT — Core supply (1.2 V) |
| Broche 92 | I/O_BANK_8 — General-purpose I/O, bank 8 |
| Broche 93 | I/O_BANK_8 — General-purpose I/O, bank 8 |
| Broche 94 | I/O_BANK_8 — General-purpose I/O, bank 8 |
| Broche 95 | GND — Ground reference |
| Broche 96 | I/O_BANK_7 — General-purpose I/O, bank 7 |
| Broche 97 | I/O_BANK_7 — General-purpose I/O, bank 7 |
| Broche 98 | VCCIO7 — I/O supply, bank 7 |
| Broche 99 | I/O_BANK_7 — General-purpose I/O, bank 7 |
| Broche 100 | GND — Ground reference |
| Broche 101 | I/O_BANK_6 — General-purpose I/O, bank 6 |
| Broche 102 | I/O_BANK_6 — General-purpose I/O, bank 6 |
| Broche 103 | I/O_BANK_6 — General-purpose I/O, bank 6 |
| Broche 104 | VCCIO6 — I/O supply, bank 6 |
| Broche 105 | I/O_BANK_6 — General-purpose I/O, bank 6 |
| Broche 106 | GND — Ground reference |
| Broche 107 | I/O_BANK_5 — General-purpose I/O, bank 5 |
| Broche 108 | I/O_BANK_5 — General-purpose I/O, bank 5 |
| Broche 109 | VCCIO5 — I/O supply, bank 5 |
| Broche 110 | I/O_BANK_5 — General-purpose I/O, bank 5 |
| Broche 111 | I/O_BANK_5 — General-purpose I/O, bank 5 |
| Broche 112 | GND — Ground reference |
| Broche 113 | I/O_BANK_4 — General-purpose I/O, bank 4 |
| Broche 114 | I/O_BANK_4 — General-purpose I/O, bank 4 |
| Broche 115 | VCCIO4 — I/O supply, bank 4 |
| Broche 116 | I/O_BANK_4 — General-purpose I/O, bank 4 |
| Broche 117 | I/O_BANK_4 — General-purpose I/O, bank 4 |
| Broche 118 | GND — Ground reference |
| Broche 119 | I/O_BANK_3 — General-purpose I/O, bank 3 |
| Broche 120 | I/O_BANK_3 — General-purpose I/O, bank 3 |
| Broche 121 | VCCIO3 — I/O supply, bank 3 |
| Broche 122 | I/O_BANK_3 — General-purpose I/O, bank 3 |
| Broche 123 | I/O_BANK_3 — General-purpose I/O, bank 3 |
| Broche 124 | GND — Ground reference |
| Broche 125 | I/O_BANK_2 — General-purpose I/O, bank 2 |
| Broche 126 | I/O_BANK_2 — General-purpose I/O, bank 2 |
| Broche 127 | VCCIO2 — I/O supply, bank 2 |
| Broche 128 | I/O_BANK_2 — General-purpose I/O, bank 2 |
| Broche 129 | I/O_BANK_2 — General-purpose I/O, bank 2 |
| Broche 130 | GND — Ground reference |
| Broche 131 | I/O_BANK_1B — General-purpose I/O, bank 1B |
| Broche 132 | I/O_BANK_1B — General-purpose I/O, bank 1B |
| Broche 133 | VCCIO1B — I/O supply, bank 1B |
| Broche 134 | I/O_BANK_1B — General-purpose I/O, bank 1B |
| Broche 135 | I/O_BANK_1B — General-purpose I/O, bank 1B |
| Broche 136 | GND — Ground reference |
| Broche 137 | I/O_BANK_1A — General-purpose I/O, bank 1A |
| Broche 138 | I/O_BANK_1A — General-purpose I/O, bank 1A |
| Broche 139 | VCCIO1A — I/O supply, bank 1A |
| Broche 140 | I/O_BANK_1A — General-purpose I/O, bank 1A |
| Broche 141 | I/O_BANK_1A — General-purpose I/O, bank 1A |
| Broche 142 | GND — Ground reference |
| Broche 143 | I/O_BANK_1A — General-purpose I/O, bank 1A |
| Broche 144 | I/O_BANK_1A — General-purpose I/O, bank 1A |
Applications typiques
10CL025YE144A7G convient pour 7 applications: Industrial Machine Vision, Motor Control and Robotics, Video Processing and Display Bridging, Factory Automation PLCs, Low-Power IoT Gateways, Portable Medical Instrumentation, LED Display Controllers.
Industrial Machine Vision
The 10CL025YE144A7G's 24,624 logic elements and 66 18x18 multipliers make it well-suited for industrial machine vision pre-processing pipelines where it can perform Bayer demosaicing, Sobel edge detection, and thresholding in parallel across multiple image streams. The 594 kbit embedded M9K memory blocks buffer line-scan data between camera and processor, while the 4 PLLs generate pixel clocks, SDRAM clocks, and Ethernet PHY reference clocks from a single crystal. Its 1.2 V core minimizes heat dissipation in sealed IP67 camera housings.
Recommandé
Motor Control and Robotics
For multi-axis motor control and robotic servo loops, the 10CL025YE144A7G's parallel logic fabric can implement up to 8 independent PID controllers at 100 kHz loop rates in a single device. The 66 embedded 18x18 multipliers accelerate Park/Clark transforms and space-vector PWM calculations for Field-Oriented Control (FOC) of 3-phase brushless motors. The 76 user I/Os comfortably handle 24 PWM channels, 8 quadrature encoder inputs, and CAN/RS-485 communications for a 6-axis robotic arm controller.
Recommandé
Video Processing and Display Bridging
The 10CL025YE144A7G serves as a low-power video bridge between legacy camera interfaces (BT.601/656, LVDS) and modern MIPI CSI-2 or DisplayPort sinks, supporting up to 1080p60 with simple color-space conversion. The Cyclone 10 LP's hardware multipliers perform deinterlacing and scaling, while 594 kbit of embedded RAM holds scan-line buffers and frame-rate conversion FIFOs. The 1.2 V core voltage enables fan-less operation in signage and kiosk enclosures where reliability is critical.
Recommandé
Factory Automation PLCs
The 10CL025YE144A7G's 76 user I/Os combined with on-chip flash configuration memory provide a deterministic, instant-on Programmable Logic Controller (PLC) platform for factory floor applications requiring <100 ms power-to-ready time. The device can implement IEC 61131-3 soft-CPU cores, EtherCAT slave controllers, and PROFIBUS interfaces in fabric. Hardened by the -40C to 100C industrial temperature option (10CL025YE144I7G), it replaces legacy microcontroller-based PLCs in harsh environments.
Recommandé
Low-Power IoT Gateways
Battery-powered IoT gateways benefit from the 10CL025YE144A7G's low static power (~125 mW typical), instant-on flash configuration, and ability to run multiple wireless protocol stacks concurrently (LoRa, BLE 5.0, Zigbee) in soft IP. The 24,624 LE fabric can host a RISC-V soft CPU (e.g., VexRiscv) for local MQTT processing, while the 4 PLLs derive radio clocks from a single 32.768 kHz crystal. The exposed-pad EQFP package provides efficient thermal dissipation for always-on operation.
Recommandé
Portable Medical Instrumentation
The 10CL025YE144A7G's deterministic timing, low power, and DSP-rich fabric support portable patient-monitoring devices such as pulse oximeters, ECG Holter monitors, and ultrasound front-ends. The 66 embedded 18x18 multipliers accelerate FFT and digital filtering of biosignals, while the 594 kbit M9K memory holds FIR/IIR coefficient tables and sample buffers. Operating from a 1.2 V core reduces battery drain, extending continuous-monitoring runtime beyond 24 hours on a single 1500 mAh cell.
Recommandé
LED Display Controllers
Driving large LED video walls requires precise parallel control of thousands of PWM channels - a task perfectly matched to the 10CL025YE144A7G's parallel logic fabric. The device can scan up to 32 output channels per logic block while performing gamma correction and color-depth enhancement in real time. The 4 PLLs generate pixel clocks for HUB75 LED panels, and the 594 kbit embedded RAM holds display refresh buffers, eliminating the need for external SRAM in many mid-size installations.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour 10CL025YE144A7G — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | 10CL016YE144A7G | 10CL025YE144C8G | 10CL025YE144C6G | 10CL025YE144I7G | 10CL010YE144A7G |
|---|---|---|---|---|---|---|
| Brand | Intel | Intel | Intel | Intel | Intel | Intel |
| Package | EQFP-144 (22x22 mm) | EQFP-144 (22x22 mm) - same | EQFP-144 (22x22 mm) - same | EQFP-144 (22x22 mm) - same | EQFP-144 (22x22 mm) - same | EQFP-144 (22x22 mm) - same |
| Logic Elements | 24,624 LE | 16,624 LE (-33%) | 24,624 LE (same) | 24,624 LE (same) | 24,624 LE (same) | 10,320 LE (-58%) |
| Embedded Memory | 594 kbit | 504 kbit (-15%) | 594 kbit (same) | 594 kbit (same) | 594 kbit (same) | 414 kbit (-30%) |
| 18x18 Multipliers | 66 | 56 (-15%) | 66 (same) | 66 (same) | 66 (same) | 46 (-30%) |
| User I/O | 76 | 78 (+2) | 76 (same) | 76 (same) | 76 (same) | 76 (same) |
| Speed Grade | -7 | -7 | -8 (slower) | -6 (faster) | -7 | -7 |
| Operating Temperature | 0 C to 85 C (commercial) | 0 C to 85 C | 0 C to 85 C | 0 C to 85 C | -40 C to 100 C (industrial) | 0 C to 85 C |
| Core Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| Configuration Memory | On-chip flash (instant-on) | On-chip flash | On-chip flash | On-chip flash | On-chip flash | On-chip flash |
Principaux différenciateurs
- Highest logic density in the Cyclone 10 LP 144-pin EQFP package family (vs 10CL016YE144A7G)
- On-chip flash configuration provides instant-on without external boot PROM (vs 10CL010YE144A7G)
- Commercial temperature variant offers lower cost than industrial-grade (vs 10CL025YE144I7G)
Notes de conception
Estimated: At 25 C ambient with 50% logic utilization and 100 MHz typical toggle rate, the 10CL025YE144A7G draws approximately 250 mA from VCCINT (1.2 V). Each VCCIO bank can draw up to 100 mA at 3.3 V depending on I/O toggle rate and loading. Provide a star-routed power distribution network with one 100 nF ceramic decoupling cap per VCC pin and one 10 uF bulk capacitor per supply rail placed within 25 mm of the package. The VCCAUX 2.5 V rail for PLLs requires a ferrite bead filter to isolate PLL analog supply from digital switching noise. Refer to the Cyclone 10 LP device handbook PowerPlay section for tool-estimated power figures specific to your design.
Route all eight VCCIO bank supplies independently to allow mixed-voltage I/O standards. Each bank should have its own 100 nF + 10 uF decoupling pair, with the 100 nF cap placed within 2 mm of the device pin. The exposed thermal pad (EPAD) must be soldered to a continuous ground plane with at least 16 thermal vias (0.3 mm drill, 0.5 mm pitch) to provide both electrical reference and thermal dissipation. Use a 4-layer PCB with dedicated ground and power planes for designs above 50 MHz internal clock rates to maintain signal integrity.
Do not leave unused I/O pins floating. Configure them as outputs driving ground or as inputs with internal weak pull-up enabled to prevent excessive shoot-through current. The nCONFIG pin must be held high for at least 100 us after all power rails reach regulation before initiating configuration. When using AS (Active Serial) mode, ensure the configuration flash clock (AS_CLK) does not exceed 40 MHz at the FPGA pin and that the series resistor (typically 33 ohm) is placed close to the FPGA driver. Refer to AN 524: Using the Cyclone 10 LP Configuration Bitstream Error Detection feature for production designs.
Estimated: At full logic utilization (24,624 LE at 100 MHz, 1.2 V core), the device can dissipate up to 2.0 W requiring either 6 C/W thermal dissipation path or airflow of 1 m/s. The EQFP-144 with soldered exposed pad achieves theta_JA of approximately 18 C/W on a 4-layer JEDEC test board, which keeps junction temperature below 100 C at 70 C ambient for typical designs. For industrial temperature designs using 10CL025YE144I7G variant, derate 10% to account for elevated ambient operation. Use Quartus Prime PowerPlay Power Analyzer for design-specific thermal analysis.
Informations de conformité
RoHS and lead-free compliant per Intel product declaration. Not AEC-Q100 qualified; for automotive applications use AEC-Q100 qualified Cyclone 10 LP automotive variants or higher-grade families.
