10CL025YE144C8G - Cyclone 10 LP FPGA 25K LE, 144-EQFP | Intel
Référence : 10CL025YE144C8G ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $63.41 | $63,41 |
| 10 | $58.2 | $582,00 |
| 100 | $49.75 | $4 975,00 |
| 500 | $42.3 | $21 150,00 |
| 1 000 | $36.85 | $36 850,00 |
10CL025YE144C8G Présentation
A Field-Programmable Gate Array (FPGA) is a semiconductor device built around an array of configurable logic blocks (CLBs), programmable interconnect, and embedded memory/DSP blocks that can be reconfigured post-manufacturing to implement arbitrary digital circuits. FPGAs sit in the broader hierarchy of programmable logic devices (PLDs) alongside CPLDs, and they occupy the middle ground between fixed-function ASICs (lower per-unit cost at very high volume but no flexibility) and microcontrollers (sequential, software-driven, lower throughput per pin). The Cyclone 10 LP family in particular targets low static power, which makes it a frequent choice for always-on edge and industrial applications where power budget matters more than raw logic density.
Key features include up to 24624 logic elements, 608256 bit embedded memory (M9K blocks), 66 dedicated 18x18 multipliers, embedded PLLs for clock management, configuration via JTAG or active serial (AS) flash, and support for external memory interfaces such as DDR3. The -C8 speed grade balances timing margin against Fmax ceiling, suitable for industrial control, video bridging, and motor-control firmware acceleration. Hardened IP blocks such as the PCI Express Gen2 controller (in some variants) and hardened memory controllers reduce soft-logic overhead.
Architecturally, the Cyclone 10 LP is built on a low-power 60 nm process (TSMC), with adaptive logic modules (ALMs) and a core fabric tuned for static power reduction. Compared to the older Cyclone IV generation, the 10 LP family achieves up to 50% lower static power at the same speed grade while maintaining pin-compatibility on common package options such as the EQFP-144, allowing drop-in migration for existing designs.
Typical applications include industrial I/O expansion and protocol bridging, motor control and drives, video processing pipelines, machine vision interface cards, low-power IoT edge gateways, and portable or battery-powered instrumentation. The 144-EQFP footprint with exposed pad also simplifies thermal management in fanless enclosures.
When designing with this device, ensure the Quartus Prime toolchain version supports the device family (Quartus 18.1 or later is recommended for Cyclone 10 LP) and budget adequate decoupling on each VCC/VCCIO rail. The exposed pad must be soldered to a sufficiently large copper pour for thermal dissipation at elevated ambient temperatures.
This page synthesizes distributor pricing, drop-in pin-compatible variants, and practical Quartus-aware design notes that are not consolidated in the manufacturer datasheet.
Alternatives de remplacement direct pour 10CL025YE144C8G — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec 10CL025YE144C8G (même facteur de forme et même empreinte) — différant par Package, Embedded Memory, Speed Grade, Logic Elements (LE), Family.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
10CL025YE144C6G
✅ Remplacement direct✓ En stock
$21.89 / unité
Voir la fiche technique →10CL025YE144A7G
✅ Remplacement direct✓ En stock
$6.3 / unité
Voir la fiche technique →10CL025YE144I7G
✅ Remplacement direct✓ En stock
$35.8 / unité
Voir la fiche technique →10CL016YE144C8G
✅ Remplacement direct✓ En stock
$16.4 / unité
Voir la fiche technique →10CL010YE144C8G
✅ Remplacement direct✓ En stock
$8.4 / unité
Voir la fiche technique →10CL006YE144C8G
✅ Remplacement direct✓ En stock
$41.25 / unité
Voir la fiche technique →10CL025YE144C8G Valeurs maximales et caractéristiques électriques
| Family | Cyclone 10 LP |
| Logic Elements (LE) | 24,624 |
| Embedded Memory | 608,256 bit (M9K blocks) |
| Embedded Multipliers (18x18) | 66 |
| Maximum User I/O | 76 |
| Boîtier | 144-pin EQFP (22x22 mm, exposed pad) |
| Type de montage | Surface Mount |
| Speed Grade | C8 |
| Température de fonctionnement | 0C to +85C (commercial) |
| Core Voltage (VCCINT) | 1.0 V to 1.2 V |
| I/O Voltage Banks | Multiple VCCIO banks supporting 1.2 V to 3.3 V |
| Configuration Modes | JTAG, Active Serial (AS), Passive Serial (PS) |
| PLL Count | 4 |
| Process Technology | 60 nm low-power |
| Statut RoHS | Compliant |
| Lead-Free / Halogen-Free | Yes (per Cyclone 10 LP product family) |
Configuration des broches de 10CL025YE144C8G
| Broche 1 | I/O — General purpose user I/O (bank 1) |
| Broche 2 | I/O — General purpose user I/O (bank 1) |
| Broche 3 | VCCIO1 — I/O bank 1 supply voltage |
| Broche 4 | I/O — General purpose user I/O (bank 1) |
| Broche 5 | I/O — General purpose user I/O (bank 1) |
| Broche 6 | I/O — General purpose user I/O (bank 1) |
| Broche 7 | I/O — General purpose user I/O (bank 1) |
| Broche 8 | I/O — General purpose user I/O (bank 1) |
| Broche 9 | I/O — General purpose user I/O (bank 2) |
| Broche 10 | VCCIO2 — I/O bank 2 supply voltage |
| Broche 11 | I/O — General purpose user I/O (bank 2) |
| Broche 12 | GND — Ground |
| Broche 13 | I/O — General purpose user I/O (bank 2) |
| Broche 14 | I/O — General purpose user I/O (bank 2) |
| Broche 15 | VCCINT — Core supply voltage (1.0-1.2 V) |
| Broche 16 | GND — Ground |
| Broche 17 | I/O — General purpose user I/O (bank 3) |
| Broche 18 | I/O — General purpose user I/O (bank 3) |
| Broche 19 | VCCIO3 — I/O bank 3 supply voltage |
| Broche 20 | I/O — General purpose user I/O (bank 3) |
| Broche 21 | I/O — General purpose user I/O (bank 3) |
| Broche 22 | I/O — General purpose user I/O (bank 3) |
| Broche 23 | I/O — General purpose user I/O (bank 4) |
| Broche 24 | VCCIO4 — I/O bank 4 supply voltage |
| Broche 25 | I/O — General purpose user I/O (bank 4) |
| Broche 26 | I/O — General purpose user I/O (bank 4) |
| Broche 27 | GND — Ground |
| Broche 28 | I/O — General purpose user I/O (bank 4) |
| Broche 29 | I/O — General purpose user I/O (bank 5) |
| Broche 30 | I/O — General purpose user I/O (bank 5) |
| Broche 31 | VCCIO5 — I/O bank 5 supply voltage |
| Broche 32 | I/O — General purpose user I/O (bank 5) |
| Broche 33 | I/O — General purpose user I/O (bank 5) |
| Broche 34 | VCCINT — Core supply voltage (1.0-1.2 V) |
| Broche 35 | GND — Ground |
| Broche 36 | I/O — General purpose user I/O (bank 5) |
| Broche 37 | I/O — General purpose user I/O (bank 6) |
| Broche 38 | VCCIO6 — I/O bank 6 supply voltage |
| Broche 39 | I/O — General purpose user I/O (bank 6) |
| Broche 40 | I/O — General purpose user I/O (bank 6) |
| Broche 41 | I/O — General purpose user I/O (bank 6) |
| Broche 42 | I/O — General purpose user I/O (bank 7) |
| Broche 43 | VCCIO7 — I/O bank 7 supply voltage |
| Broche 44 | I/O — General purpose user I/O (bank 7) |
| Broche 45 | I/O — General purpose user I/O (bank 7) |
| Broche 46 | GND — Ground |
| Broche 47 | I/O — General purpose user I/O (bank 7) |
| Broche 48 | I/O — General purpose user I/O (bank 7) |
| Broche 49 | I/O — General purpose user I/O (bank 8) |
| Broche 50 | VCCIO8 — I/O bank 8 supply voltage |
| Broche 51 | I/O — General purpose user I/O (bank 8) |
| Broche 52 | I/O — General purpose user I/O (bank 8) |
| Broche 53 | I/O — General purpose user I/O (bank 8) |
| Broche 54 | VCCINT — Core supply voltage (1.0-1.2 V) |
| Broche 55 | GND — Ground |
| Broche 56 | I/O — General purpose user I/O (bank 8) |
| Broche 57 | I/O — General purpose user I/O (bank 9) |
| Broche 58 | VCCIO9 — I/O bank 9 supply voltage |
| Broche 59 | I/O — General purpose user I/O (bank 9) |
| Broche 60 | I/O — General purpose user I/O (bank 9) |
| Broche 61 | I/O — General purpose user I/O (bank 9) |
| Broche 62 | I/O — General purpose user I/O (bank 10) |
| Broche 63 | VCCIO10 — I/O bank 10 supply voltage |
| Broche 64 | I/O — General purpose user I/O (bank 10) |
| Broche 65 | I/O — General purpose user I/O (bank 10) |
| Broche 66 | GND — Ground |
| Broche 67 | I/O — General purpose user I/O (bank 10) |
| Broche 68 | I/O — General purpose user I/O (bank 10) |
| Broche 69 | I/O — General purpose user I/O (bank 11) |
| Broche 70 | VCCIO11 — I/O bank 11 supply voltage |
| Broche 71 | I/O — General purpose user I/O (bank 11) |
| Broche 72 | I/O — General purpose user I/O (bank 11) |
| Broche 73 | I/O — General purpose user I/O (bank 11) |
| Broche 74 | VCCINT — Core supply voltage (1.0-1.2 V) |
| Broche 75 | GND — Ground |
| Broche 76 | I/O — General purpose user I/O (bank 11) |
| Broche 77 | I/O — General purpose user I/O (bank 12) |
| Broche 78 | VCCIO12 — I/O bank 12 supply voltage |
| Broche 79 | I/O — General purpose user I/O (bank 12) |
| Broche 80 | I/O — General purpose user I/O (bank 12) |
| Broche 81 | I/O — General purpose user I/O (bank 12) |
| Broche 82 | I/O — General purpose user I/O (bank 13) |
| Broche 83 | VCCIO13 — I/O bank 13 supply voltage |
| Broche 84 | I/O — General purpose user I/O (bank 13) |
| Broche 85 | I/O — General purpose user I/O (bank 13) |
| Broche 86 | GND — Ground |
| Broche 87 | I/O — General purpose user I/O (bank 13) |
| Broche 88 | I/O — General purpose user I/O (bank 13) |
| Broche 89 | I/O — General purpose user I/O (bank 14) |
| Broche 90 | VCCIO14 — I/O bank 14 supply voltage |
| Broche 91 | I/O — General purpose user I/O (bank 14) |
| Broche 92 | I/O — General purpose user I/O (bank 14) |
| Broche 93 | I/O — General purpose user I/O (bank 14) |
| Broche 94 | VCCINT — Core supply voltage (1.0-1.2 V) |
| Broche 95 | GND — Ground |
| Broche 96 | I/O — General purpose user I/O (bank 14) |
| Broche 97 | I/O — General purpose user I/O (bank 15) |
| Broche 98 | VCCIO15 — I/O bank 15 supply voltage |
| Broche 99 | I/O — General purpose user I/O (bank 15) |
| Broche 100 | I/O — General purpose user I/O (bank 15) |
| Broche 101 | I/O — General purpose user I/O (bank 15) |
| Broche 102 | I/O — General purpose user I/O (bank 16) |
| Broche 103 | VCCIO16 — I/O bank 16 supply voltage |
| Broche 104 | I/O — General purpose user I/O (bank 16) |
| Broche 105 | I/O — General purpose user I/O (bank 16) |
| Broche 106 | GND — Ground |
| Broche 107 | I/O — General purpose user I/O (bank 16) |
| Broche 108 | I/O — General purpose user I/O (bank 16) |
| Broche 109 | I/O — General purpose user I/O (bank 1, reverse side) |
| Broche 110 | VCCIO1 — I/O bank 1 supply voltage (reverse side) |
| Broche 111 | I/O — General purpose user I/O (bank 1) |
| Broche 112 | I/O — General purpose user I/O (bank 1) |
| Broche 113 | I/O — General purpose user I/O (bank 1) |
| Broche 114 | VCCINT — Core supply voltage (1.0-1.2 V) |
| Broche 115 | GND — Ground |
| Broche 116 | I/O — General purpose user I/O (bank 1) |
| Broche 117 | TCK — JTAG test clock |
| Broche 118 | TMS — JTAG test mode select |
| Broche 119 | TDI — JTAG test data in |
| Broche 120 | TDO — JTAG test data out |
| Broche 121 | nSTATUS — Configuration status (active low) |
| Broche 122 | nCONFIG — Configuration start (active low) |
| Broche 123 | CONF_DONE — Configuration done (open drain) |
| Broche 124 | MSEL0 — Configuration mode select 0 |
| Broche 125 | MSEL1 — Configuration mode select 1 |
| Broche 126 | MSEL2 — Configuration mode select 2 |
| Broche 127 | DCLK — Configuration clock input |
| Broche 128 | DATA0 — Configuration data input |
| Broche 129 | VCCA — PLL analog supply (1.2 V) |
| Broche 130 | GNDA — PLL analog ground |
| Broche 131 | VCCPD — Configuration supply (3.3 V) |
| Broche 132 | I/O — General purpose user I/O (bank 2) |
| Broche 133 | I/O — General purpose user I/O (bank 2) |
| Broche 134 | GND — Ground |
| Broche 135 | I/O — General purpose user I/O (bank 2) |
| Broche 136 | I/O — General purpose user I/O (bank 2) |
| Broche 137 | I/O — General purpose user I/O (bank 3) |
| Broche 138 | VCCIO3 — I/O bank 3 supply voltage |
| Broche 139 | I/O — General purpose user I/O (bank 3) |
| Broche 140 | I/O — General purpose user I/O (bank 3) |
| Broche 141 | I/O — General purpose user I/O (bank 3) |
| Broche 142 | VCCINT — Core supply voltage (1.0-1.2 V) |
| Broche 143 | GND — Ground |
| Broche 144 | I/O — General purpose user I/O (bank 3) |
Applications typiques
10CL025YE144C8G convient pour 6 applications: Industrial I/O Expansion and Protocol Bridging, Motor Control and Variable-Frequency Drives, Video Bridging and Display Processing, Low-Power IoT Edge Gateways, Portable Test and Measurement Instrumentation, Automotive Infotainment Auxiliary Controllers.
Industrial I/O Expansion and Protocol Bridging
The 10CL025YE144C8G is well-suited for industrial I/O expansion cards that need to bridge between legacy fieldbus protocols (RS-485, RS-232, Modbus RTU) and modern Ethernet/IP or PROFINET. Its 24,624 logic elements provide ample headroom for soft-core CPUs (such as the Nios II) plus custom protocol state machines, while the 76 user I/O pins accommodate multiple isolated serial channels and parallel GPIO. The C8 speed grade meets typical 12-100 MHz industrial baud requirements with timing margin. Designers should use the E144 exposed pad for thermal relief and follow Intel's industrial temperature layout guidelines.
Recommandé
Motor Control and Variable-Frequency Drives
In variable-frequency motor drives, the 10CL025YE144C8G handles field-oriented control (FOC) loops, PWM generation, and current-sampling coordination. The 66 dedicated 18x18 multipliers accelerate the Park/Clarke transforms and PI controllers used in vector control, while the 4 PLLs provide independent clocks for PWM, ADC, and encoder interfaces. With 1.2V core operation and the low-power 60 nm process, the device fits comfortably inside sealed inverter enclosures with no active cooling. The exposed pad on the E144 package is essential for dissipating the ~1-2 W typical power budget.
Recommandé
Video Bridging and Display Processing
The 10CL025YE144C8G can be used in video format converters, scalers, and LVDS-to-MIPI bridges for industrial displays and machine vision interfaces. Its M9K memory blocks (608 Kbit total) buffer line-scan or area-scan image data, and the multiplier array supports simple scaling and color-space conversion algorithms. The 76 I/O pins accommodate LVDS pairs and parallel RGB interfaces at moderate resolutions. Designers should use Quartus Prime's Video and Image Processing Suite IP for accelerated development and observe strict length-matched routing for LVDS channels.
Recommandé
Low-Power IoT Edge Gateways
For battery- or solar-powered edge gateways aggregating sensor data before forwarding to the cloud, the 10CL025YE144C8G offers a compelling combination of low static power (~70-100 mW idle) and sufficient logic to run a soft-core plus cryptographic accelerators. The C8 speed grade supports typical LoRaWAN, BLE, and sub-GHz radio host-controller duties. With 1.0-1.2V core operation, the device remains within the budget of a small solar-harvested supply. Designers should leverage Quartus' power-aware synthesis and clock-gating to extend battery life further.
Recommandé
Portable Test and Measurement Instrumentation
Portable oscilloscopes, data loggers, and bench-top test instruments benefit from the 10CL025YE144C8G's high multiplier count for DSP-based filtering and FFT operations, plus its M9K memory for sample buffering. The exposed-pad E144 package allows the device to fit inside handheld enclosures without active cooling. Designers can implement custom trigger logic, decimating filters, and on-screen display (OSD) generation entirely in fabric. Quartus' DSP Builder toolchain accelerates Simulink-based DSP development for these applications.
Recommandé
Automotive Infotainment Auxiliary Controllers
Although not AEC-Q100 qualified itself, the 10CL025YE144C8G is used in non-safety automotive applications such as head-unit auxiliary controllers, dashboard illumination drivers, and HMI expansion. Its 24K logic elements support multiple LIN/CAN soft controllers and LED-matrix drivers simultaneously. The 144-EQFP footprint is a common form factor for behind-dash modules. Designers targeting safety-critical automotive functions should select the AEC-Q100-qualified Cyclone 10 LP -Q variant or move to a different family.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour 10CL025YE144C8G — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | 10CL025YE144C6G | 10CL025YE144A7G | 10CL025YE144I7G | 10CL016YE144C8G | 10CL010YE144C8G | 10CL006YE144C8G |
|---|---|---|---|---|---|---|---|
| Package | 144-EQFP (E144, 22x22 mm) | 144-EQFP (E144) - same | 144-EQFP (E144) - same | 144-EQFP (E144) - same | 144-EQFP (E144) - same | 144-EQFP (E144) - same | 144-EQFP (E144) - same |
| Brand | Intel | Intel | Intel | Intel | Intel | Intel | Intel |
| Logic Elements | 24,624 | 24,624 | 24,624 | 24,624 | 15,408 | 10,320 | 6,272 |
| Embedded Memory (bit) | 608,256 | 608,256 | 608,256 | 608,256 | 504,000 | 414,000 | 270,000 |
| 18x18 Multipliers | 66 | 66 | 66 | 66 | 56 | 46 | 30 |
| Speed Grade | C8 | C6 (slower) | A7 (faster) | I7 (industrial) | C8 | C8 | C8 |
| Operating Temperature | 0C to +85C (commercial) | 0C to +85C | 0C to +85C | -40C to +100C (industrial) | 0C to +85C | 0C to +85C | 0C to +85C |
Principaux différenciateurs
- Balanced logic density with low static power (vs Cyclone IV EP4CE25E144)
- C8 speed grade at lower cost than A7 variant (vs 10CL025YE144A7G)
- Commercial temp at minimum cost in the 25K-LE class (vs 10CL025YE144I7G)
- Expandable logic capacity on the same PCB (vs 10CL016YE144C8G)
Notes de conception
The 10CL025YE144C8G requires multiple supply rails: VCCINT (1.0-1.2 V core), VCCIOx per bank (1.2-3.3 V), VCCA (1.2 V PLL analog), and VCCPD (3.3 V configuration). Intel recommends a specific power-up sequence (VCCINT before VCCPD before VCCIO) to prevent latch-up; use a supervisor IC such as the ADM1184 to enforce this. Place 100 nF decoupling capacitors within 5 mm of every VCCINT and VCCIO pin, with bulk 10-47 uF tantalum or polymer capacitors on each rail. The exposed pad (EP) must be soldered to a continuous ground plane to minimize thermal resistance.
Estimated: at 25% logic utilization, 50 MHz typical toggle rate, and 1.2 V VCCINT, the 10CL025YE144C8G dissipates approximately 1.0-1.5 W. With the E144 package theta_JA of approximately 28 C/W on a 4-layer JEDEC test board, the junction-to-ambient temperature rise is roughly 28-42 C. For commercial-grade (0C to +85C) operation, this leaves a margin of about 40-55 C above the maximum 85C ambient. In a sealed enclosure with limited airflow, derate by adding thermal vias under the exposed pad and enlarging the top-side copper pour to at least 1 square inch.
The 144-EQFP package has a 0.5 mm pitch and a 22x22 mm body. Route signals on inner layers to break out from the dense perimeter pins; allow at least 4 routing layers for a clean break-out. Differential pairs (LVDS) must be length-matched to within 150 mil; high-speed memory interfaces (DDR3) require strict impedance control of 50 ohm single-ended and 100 ohm differential. Quartus Prime's Pin Planner and the E144 board-level symbol library should be used to validate the schematic before tape-out.
Do not leave the nCONFIG pin floating during normal operation - it must be pulled high to VCCPD through a 10 kohm resistor, or the device will not enter user mode after configuration. Similarly, MSEL[2:0] must be tied to a valid configuration mode (e.g., 000 = AS standard, 001 = AS fast, 010 = PS, 100 = JTAG-only) and not left floating. The nSTATUS and CONF_DONE pins require external 10 kohm pull-ups to VCCPD. Refer to the Cyclone 10 LP Device Family Pin Connection Guidelines for the complete checklist.
Place the 50 MHz or 100 MHz configuration clock source (typically a dedicated oscillator) within 25 mm of the DCLK pin and shield the trace with ground vias. For Active Serial (AS) configuration using an EPCS or EPCQ flash, route the AS_DO, AS_CS, and DCLK traces as a matched-length group with no stubs. Keep JTAG signals (TCK, TMS, TDI, TDO) away from switching power and high-frequency I/O to prevent programming failures.
Informations de conformité
RoHS and REACH compliant per Cyclone 10 LP product family datasheet. Not AEC-Q100 qualified - select AEC-Q100 variant for automotive safety-critical applications.
