EPM5192JM/883B - 192 Macrocells MAX 5000 CPLD, 55ns, CDIP-28
Référence : EPM5192JM/883B ✗ Fin de vie| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $285 | $285,00 |
| 10 | $256.5 | $2 565,00 |
| 100 | $228 | $22 800,00 |
| 500 | $199.5 | $99 750,00 |
| 1 000 | $171 | $171 000,00 |
EPM5192JM/883B Présentation
A Complex Programmable Logic Device (CPLD) is a non-volatile, electrically-erasable logic device that integrates multiple PAL-like macrocell arrays on a single die, offering predictable timing, deterministic I/O behavior, and instant-on operation. In the broader component hierarchy, a CPLD sits between a discrete PAL/GAL and a full FPGA: it consumes less power than an FPGA, has faster I/O than discrete 74LS glue, and retains its configuration without external memory. The EPM5192JM/883B specifically targets the upper end of the MAX 5000 density range, delivering the largest macrocell count and I/O count of the family at the time of release.
Key features include 192 logic macrocells organized across multiple Logic Array Blocks (LABs), 64 bidirectional I/O pins plus up to 72 inputs (including dedicated inputs), UV-erasable windowed ceramic package for prototype and reprogrammable field deployment, 55 ns pin-to-pin propagation delay (tPD), and full MIL-STD-883B processing for high-reliability environments. The device uses a sum-of-products architecture with a global interconnect that is fast and predictable across temperature.
The EPM5192JM/883B is built on a 5 V CMOS process with on-chip charge-pump-generated programming voltages and a JTAG-style or Altera-proprietary programming interface. Its deterministic, fixed-delay architecture makes timing closure trivial compared with SRAM-based FPGAs - a key reason it remains specified for long-lifecycle avionics, naval, and industrial-control systems where FPGA bit-stream management would be unacceptable.
Typical applications include military and aerospace avionics bus interfaces, industrial control glue logic, address decoding in VME/cPCI backplanes, state-machine replacement in legacy 5 V designs, and high-reliability communication infrastructure. The /883B screening makes it directly suitable for programs that reference MIL-STD-883B Class B parts.
When designing with this device, route programming access (the quartz window allows UV erasure) and reserve board space for a socket; verify that timing closure still meets the 55 ns budget at -55C to +125C. Also note that MAX 5000 devices are no longer in active production - plan long-term support, sourcing, and last-time-buy logistics carefully for new programs.
Alternatives de remplacement direct pour EPM5192JM/883B — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec EPM5192JM/883B (même facteur de forme et même empreinte) — différant par Package, Mounting Type, Programming Method, Supply Voltage (VCC), Technology.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
EPM5192JM/883
✅ Remplacement direct✓ En stock
$195 / unité
Voir la fiche technique →EPM5192JM-1/883B
✅ Remplacement direct✓ En stock
$108 / unité
Voir la fiche technique →EPM5192JM-2/883B
✅ Remplacement direct✓ En stock
$140 / unité
Voir la fiche technique →EPM5192GM/883B
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$118 / unité
Voir la fiche technique →EPM5192JM/883B Valeurs maximales et caractéristiques électriques
| Device Family | MAX 5000 |
| Device Type | EPLD (UV-erasable CMOS Programmable Logic Device) |
| Macrocells | 192 |
| User I/O Pins | 64 |
| Total Inputs (incl. dedicated) | Up to 72 |
| Propagation Delay (tPD) | 55 ns |
| Supply Voltage (VCC) | 4.5 V to 5.5 V (5 V nominal) |
| Technology | CMOS, UV-erasable |
| Boîtier | CDIP-28 (J-lead, windowed ceramic) |
| Type de montage | Through-hole, socketed |
| Operating Temperature (MIL grade) | -55C to +125C |
| Screening | MIL-STD-883B |
| Programming Method | UV erasure + Altera Byteblaster / device programmer |
Guide de configuration des broches du EPM5192JM/883B cdip-28 (j-lead, windowed ceramic)
Configuration des broches du EPM5192JM/883B (boîtier cdip-28 (j-lead, windowed ceramic)). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour EPM5192JM/883B.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
EPM5192JM/883B convient pour 6 applications: Military Avionics Bus Interface, Industrial Control Glue Logic Replacement, VME/cPCI Backplane Address Decoding, Legacy 5V State Machine Consolidation, High-Reliability Communication Infrastructure, Aerospace Test & Measurement Equipment.
Military Avionics Bus Interface
The EPM5192JM/883B fits MIL-STD-1553, ARINC 429, and discrete avionics glue-logic roles because of its MIL-STD-883B screening, -55C to +125C operating range, and 192-macrocell capacity to handle bus arbitration, parity, and encoding in a single chip. Its 55 ns propagation delay is sufficient for the kbps-to-low-Mbps data rates typical of legacy avionics buses, and the UV-windowed CDIP-28 package allows in-the-field reprogramming during flight-test iterations. Compared with discrete 54LS/74AS glue, it collapses dozens of packages into one, cutting board area and improving reliability in vibration-prone airframes. Source: Altera MAX 5000 datasheet.
Recommandé
Industrial Control Glue Logic Replacement
In long-lifecycle industrial controllers, the EPM5192JM/883B replaces dozens of 74LS/74HC glue-logic packages with a single programmable part, reducing board area, BOM count, and failure surface. The 192 macrocells easily encode state machines for motor control sequencing, sensor multiplexing, and relay drivers. MIL-STD-883B screening provides robustness against temperature, vibration, and humidity in factory-floor and process-control enclosures, while the UV-windowed CDIP-28 package supports on-site firmware updates via standard Altera programmers. Estimated power consumption at 5V/typical toggle rate is in the low hundreds of mW - acceptable for sealed industrial cabinets.
Recommandé
VME/cPCI Backplane Address Decoding
The EPM5192JM/883B is well-suited for address decoding and interrupt steering on legacy VMEbus and cPCI backplanes. Its 192 macrocells comfortably decode multi-bit board addresses, generate chip-select strobes for local memory and peripherals, and arbitrate interrupts - all in one deterministic-timed device. The 55 ns propagation delay fits VMEbus access timing windows with no timing-closure surprises, and the 64 user I/Os handle ample address/data bus fan-out. The CDIP-28 windowed ceramic package fits standard 28-pin DIP sockets, simplifying retrofitting of older 5 V backplane cards without redesign.
Recommandé
Legacy 5V State Machine Consolidation
Engineers maintaining legacy 5V systems use the EPM5192JM/883B to consolidate discrete 74LS181/74LS244 state machines into a single, reprogrammable device. With 192 macrocells and deterministic timing, complex sequencers, timers, and controllers fit easily, while the MIL-STD-883B screening ensures the part survives harsh environments. The CDIP-28 windowed ceramic package is field-programmable with a UV eraser, allowing in-service firmware updates without removing the device from the board. The 5V supply is natively compatible with TTL logic rails, eliminating level translation that would be required by 3.3V modern CPLDs.
Recommandé
High-Reliability Communication Infrastructure
The EPM5192JM/883B is used in military communication and naval systems for protocol conversion, line-interface glue, and timing generation. Its MIL-STD-883B Class B screening, ceramic CDIP-28 package, and -55C to +125C operating range satisfy long-deployment programs where COTS plastic parts cannot be qualified. With 64 user I/Os, it can drive multiple serial links or bus interfaces concurrently, and the 55 ns timing margin allows generous trace lengths on backplane wiring. The deterministic interconnect also simplifies DO-254/DO-178 adjacent verification flows required in safety-critical comms programs.
Recommandé
Aerospace Test & Measurement Equipment
Test and measurement instrumentation for aerospace applications benefits from the EPM5192JM/883B's combination of MIL-STD-883B screening, 192 macrocells, and 64 user I/Os. Engineers can implement multiplexers, trigger logic, waveform generators, and timing-and-control sequencers in a single part, with predictable 55 ns timing for accurate measurement windows. The UV-windowed CDIP-28 package enables iterative firmware development in the lab, and the ceramic construction withstands the temperature cycling seen in avionics bay test stands. Long-term availability through authorized brokers keeps fielded testers supportable for decades.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour EPM5192JM/883B — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | EPM5192JM/883 | EPM5192JM-1/883B | EPM5192JM-2/883B | EPM5192GM/883B |
|---|---|---|---|---|---|
| Brand | Altera | Altera | Altera | Altera | Altera |
| Package | CDIP-28 (J-lead, windowed ceramic) | CDIP-28 (J-lead, windowed ceramic) - same | CDIP-28 (J-lead, windowed ceramic) - same | CDIP-28 (J-lead, windowed ceramic) - same | PGA (ceramic pin grid array) - different |
| Macrocells | 192 | 192 | 192 | 192 | 192 |
| User I/O Pins | 64 | 64 | 64 | 64 | 64 |
| Supply Voltage | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V |
| Screening | MIL-STD-883B | MIL-STD-883 (Class B) | MIL-STD-883B | MIL-STD-883B | MIL-STD-883B |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete |
| Programming Method | UV-erasable (windowed) | UV-erasable | UV-erasable | UV-erasable | UV-erasable (windowed PGA) |
Principaux différenciateurs
- Largest macrocell density in MAX 5000 family (vs EPM5130 family)
- MIL-STD-883B screened, windowed ceramic CDIP-28 (vs EPM5192JI-2 (industrial plastic))
- UV-erasable, field-reprogrammable (vs OTP MAX 5000 variants)
Notes de conception
Estimated: at VCC=5.25V, 25 MHz toggle across 192 macrocells, ICC will be roughly 200-400 mA, dissipating about 1-2W. The CDIP-28 ceramic package has a higher theta_JA than plastic equivalents, so adequate airflow or heat-sinking through the ceramic body may be required in sealed enclosures. Verify junction temperature against the MIL-STD-883B -55C to +125C operating range with worst-case ambient and duty-cycle assumptions.
The CDIP-28 J-lead package requires a through-hole socket or plated-through-hole footprint with 0.1 inch (2.54 mm) row spacing. Preserve a UV-transparent ceramic window above the package if in-field erasure is anticipated; shade the window from direct sunlight to prevent accidental erasure. Place 0.1 uF decoupling capacitors on every VCC pin pair and keep them within 5 mm of the device leads to control switching noise on the 5 V rail.
Do not confuse EPM5192JM/883B (ceramic J-lead windowed DIP) with EPM5192GM/883B (ceramic PGA), EPM5192JI-2 (industrial plastic J-lead), or EPM5192GM/8883 (typographical suffix variant). Only /883B-screened parts are acceptable as direct MIL-program replacements. Be aware that the MAX 5000 family is obsolete and MAX+PLUS II legacy design files may require recompilation in current Altera/Intel Quartus tools before re-programming.
Route programming signals to a header or test point so the device can be erased and reprogrammed in-circuit if a UV eraser and Altera-compatible device programmer are available. Avoid placing tall components directly above the ceramic window where they could shadow the UV lamp. For high-vibration environments, use a latched or screw-down socket rather than a friction-fit DIP socket to prevent intermittent contact.
Informations de conformité
Compliance information not explicitly provided in the Verified Web Data. The CDIP-28 ceramic package and /883B screening suggest a heritage military/aerospace part that pre-dates widespread RoHS adoption; verify compliance with the specific distributor lot before using in RoHS-restricted designs.
