STM32F217ZET6 - 120MHz Cortex-M3 MCU | STMicroelectronics
Référence : STM32F217ZET6 ✓ ActifSTM32F217ZET6 Présentation
A microcontroller, or MCU, integrates a processor core, nonvolatile program memory, working memory, peripherals, and communication interfaces on one semiconductor device. The STM32F2 series belongs to the hierarchy of 32-bit microcontroller, embedded processor, embedded controller, and semiconductor categories. Its ARM Cortex-M3 architecture provides a compact platform for real-time control, communications, data acquisition, human-interface equipment, and connected industrial equipment.
Key features include execution up to 120 MHz, 512 KB of Flash memory, 128 KB of SRAM plus 4 KB of backup SRAM, and an ART Accelerator designed for zero-wait-state Flash execution. The device also provides three 12-bit ADCs, 17 timers, Ethernet MAC, USB OTG HS/FS, camera interface, cryptographic capability, and 15 communication interfaces. These resources support simultaneous control, sensing, networking, and peripheral management without requiring separate interface devices.
The Cortex-M3 processor uses a reduced-instruction-set architecture with hardware bit-manipulation instructions and a memory-protection unit. At its maximum 120 MHz frequency, the core can deliver up to 150 DMIPS according to the manufacturer datasheet. The large Flash and SRAM capacities accommodate network stacks, bootloader code, graphics or camera functions, control algorithms, and field-upgradeable application logic while retaining sufficient working space for real-time processing.
Typical applications include industrial automation controllers, Ethernet-connected equipment, camera and vision systems, USB peripherals, audio equipment, building-control panels, and industrial communications gateways. The 144-pin LQFP package exposes substantially more I/O than smaller MCU packages, making the STM32F217ZET6 suitable for designs requiring parallel interfaces, multiple communications channels, mixed-signal conversion, and deterministic peripheral expansion.
Designers should pay particular attention to clock, reset, power, decoupling, and signal-routing requirements. Place decoupling capacitors beside the appropriate supply pins, route high-speed signals away from switching nodes, and validate unused-pin termination against the manufacturer pin and package guidance. Firmware qualification should also include voltage-level, timing, peripheral-mapping, and errata checks before replacing an existing STM32F2 design.
This page combines the key architecture, memory, connectivity, and package characteristics with application guidance, verified drop-in alternatives, comparison parameters, and practical PCB considerations. It is designed to help engineers evaluate the STM32F217ZET6 for new designs and structured replacement projects without relying on a raw distributor listing alone.
Alternatives de remplacement direct pour STM32F217ZET6 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec STM32F217ZET6 (même facteur de forme et même empreinte) — différant par Flash Memory, Package, ADC, DMA, Ethernet.
STM32F207ZET6
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →STM32F205ZET6
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →STM32F217ZGT6
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →STM32F207ZGT6
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →STM32F417ZGT6
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →STM32F217ZET6 Valeurs maximales et caractéristiques électriques
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| Maximum CPU Frequency | 120 MHz |
| CPU Architecture | ARM 32-bit Cortex-M3 RISC |
| Flash Memory | 512 KB |
| Flash Organization | 512K x 8 bits |
| SRAM | 128 KB |
| Backup SRAM | 4 KB |
| Core Performance | 150 DMIPS at 120 MHz |
| Instruction Rate | 1.25 DMIPS/MHz |
| ADC Resolution | 12 bit |
| ADC Count | 3 |
| Timer Count | 17 |
| Communication Interface Count | 15 |
| Ethernet | Ethernet MAC |
| USB Interface | USB OTG HS/FS |
| Camera Interface | Camera interface |
| Cryptography | Hardware cryptographic capability |
| Flash Wait-State Execution | 0 wait states with ART Accelerator |
| Memory Protection | Memory protection unit |
| Boîtier | 144-LQFP |
| Package Body Size | 20 mm x 20 mm |
| Type de montage | Surface mount |
Guide de configuration des broches du STM32F217ZET6 20 mm x 20 mm
Configuration des broches du STM32F217ZET6 (boîtier 20 mm x 20 mm). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour STM32F217ZET6.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
STM32F217ZET6 convient pour 6 applications: Industrial Automation Controller, Ethernet Communications Gateway, USB-Camera Imaging Module, USB-to-Serial Control Interface, Data Acquisition and Condition Monitoring, Building-Control and HVAC Panel.
Industrial Automation Controller
The STM32F217ZET6 fits industrial automation controllers that combine deterministic control with network connectivity. Its 120 MHz ARM Cortex-M3 core provides processing headroom, while 512 KB of Flash and 128 KB of SRAM support control software, communication stacks, and data buffers. Three 12-bit ADCs and 17 timers support analog sensing and multiple timing functions. The integrated Ethernet MAC reduces the need for a separate host interface, although an external PHY is still required for a physical Ethernet connection. For motor, valve, or machine control, verify industrial temperature, isolation, surge, and EMC requirements in the finished equipment.
Recommandé
Ethernet Communications Gateway
The STM32F217ZET6 is well suited to an Ethernet gateway that translates between a local embedded controller and networked equipment. Its Cortex-M3 processor can execute protocol processing at up to 120 MHz, and the ART Accelerator supports efficient zero-wait-state execution from the 512 KB Flash region. The integrated Ethernet MAC and 15 communication interfaces can support multiple local serial or parallel links. Place the MCU, Ethernet PHY, magnetics, and protection components according to the manufacturer reference layout, and isolate high-energy network transients from the logic ground to improve production reliability.
Recommandé
USB-Camera Imaging Module
The STM32F217ZET6 can serve as the control processor for a camera module because it combines a 120 MHz Cortex-M3 core, a camera interface, USB OTG HS/FS capability, and substantial memory. The 512 KB Flash region can retain image-processing firmware and device control code, while 128 KB of SRAM supports buffering and control tasks. A parallel camera sensor can feed the camera interface, and USB can provide configuration or data connectivity to a host. Validate signal timing, sensor lane requirements, USB routing, impedance, and firmware support for the selected camera sensor before production release.
Recommandé
USB-to-Serial Control Interface
The STM32F217ZET6 is appropriate for a USB-connected configuration or control interface because it includes USB OTG HS/FS, multiple UART-class communications interfaces, timers, and general-purpose I/O. Firmware can expose a control protocol for field configuration, diagnostics, or data transfer while the CPU handles peripheral monitoring. The large 144-LQFP pin count provides additional routing flexibility compared with smaller MCU packages. Care is required with USB signal integrity, including controlled impedance, short traces, appropriate return paths, ESD protection, and separation from clocks and switching power nodes.
Recommandé
Data Acquisition and Condition Monitoring
The STM32F217ZET6 supports data-acquisition and condition-monitoring systems that combine analog measurement with communications and local processing. Three 12-bit ADCs can sample multiple analog channels, while the 120 MHz Cortex-M3 core performs filtering, calibration, and protocol handling. Its 128 KB of SRAM accommodates working buffers, while the 512 KB Flash region provides room for application code and logging functions. Use controlled analog grounding, input protection, and separated routing between sensing and communications sections. Verify ADC accuracy, source impedance, sampling time, reference quality, and the required temperature range for the installed sensors.
Recommandé
Building-Control and HVAC Panel
The STM32F217ZET6 is suitable for a building-control or HVAC panel that coordinates sensors, actuators, local displays, and communications. The Cortex-M3 processing capacity supports real-time control, the timer resources handle periodic tasks, and the communication interfaces can connect field buses or service ports. The Ethernet MAC offers a path to centralized monitoring, while the three ADCs support analog sensor inputs. The 144-LQFP package makes numerous external connections practical. During design review, check shutdown behavior, brownout handling, watchdog strategy, ESD requirements at field connectors, and fail-safe operation during communication loss.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour STM32F217ZET6 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | STM32F207ZET6 | STM32F205ZET6 | STM32F217ZGT6 | STM32F207ZGT6 | STM32F417ZGT6 |
|---|---|---|---|---|---|---|
| Package | 144-LQFP (20x20) | 144-LQFP (20x20) | 144-LQFP (20x20) | 144-LQFP (20x20) | 144-LQFP (20x20) | 144-LQFP (20x20) |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| CPU Core | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 |
| Flash Memory | 512 KB | 512 KB | 512 KB | 1 MB | 1 MB | 1 MB |
| USB Interface | USB OTG HS/FS | USB OTG HS/FS | USB OTG HS/FS | USB OTG HS/FS | USB OTG HS/FS | USB OTG HS/FS |
| ADC | 3 x 12-bit | 3 x 12-bit | 3 x 12-bit | 3 x 12-bit | 3 x 12-bit | 3 x 12-bit |
Principaux différenciateurs
- Exact 512 KB Flash configuration (vs STM32F217ZGT6)
- 120 MHz Cortex-M3 performance (vs STM32F417ZGT6)
- Integrated high-speed connectivity (vs STM32F205ZET6)
Notes de conception
Follow the manufacturer power-supply and decoupling recommendations for the 144-LQFP footprint. Place each required bypass capacitor directly beside its associated supply pin, with the shortest possible connection and an individual return path to the relevant ground plane. Keep the analog and digital return-current paths controlled so that ADC sampling, Ethernet interfaces, and switching supplies do not share high-current paths.
Preserve the 20 mm by 20 mm LQFP land pattern, including the exposed thermal pad and its via field. Treat the thermal pad as a heat-spreading and electrical structure specified by the manufacturer rather than as an optional copper area. Apply the manufacturer’s paste and soldering profile to avoid voiding beneath a 144-pin device, and verify the assembled pad connection with appropriate process controls.
Route high-speed clock, USB, Ethernet, camera, and external-memory interfaces with continuous reference planes and without unnecessary test-point stubs. Separate these paths from switching nodes and noisy inductors, especially near the ADC circuitry. Confirm edge rates, impedance, timing, and crosstalk against the relevant interface specifications rather than relying only on schematic connectivity.
A shared 144-LQFP footprint does not by itself prove that a replacement is functionally identical. Before substituting an STM32F2-family device, compare memory-map behavior, peripheral availability, pin multiplexing, electrical limits, startup timing, package dimensions, thermal requirements, and errata. Re-run firmware and worst-case hardware tests even when the selected alternative retains the Cortex-M3 core.
Informations de conformité
The manufacturer lifecycle listing identifies the device as active. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations were not identified and remain unconfirmed.
