XCF32PVOG48C - 32Mb FPGA Config PROM 1.8V 48-TSOP | AMD
Référence : XCF32PVOG48C ⚠ Dernier achat| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $32.45 | $32,45 |
| 10 | $28.9 | $289,00 |
| 100 | $25.1 | $2 510,00 |
| 500 | $22.4 | $11 200,00 |
| 1 000 | $19.85 | $19 850,00 |
XCF32PVOG48C Présentation
A Platform Flash configuration PROM is a non-volatile NOR Flash memory device whose primary role is to hold the FPGA bitstream and present it to the target FPGA over a serial or parallel configuration interface. In the broader memory hierarchy it sits under EEPROM and Flash PROM, and above raw NOR Flash, providing a pre-validated, FPGA-aware configuration storage medium. It relieves the system designer of placing a separate boot Flash on the board and is typically the first device in the FPGA configuration chain.
Key electrical features include a 32 Mbit (4 Mbyte) organized as 1-bit-wide serial/parallel PROM, a 1.65 V to 2.0 V operating voltage range with 3.3 V tolerant I/O pins, low-power advanced CMOS Flash technology, an in-system programmable JTAG/IEEE 1149.1 interface, and cascade support for storing larger bitstreams. The 48-pin TSOP provides a compact, surface-mount footprint compatible with standard PCB assembly lines.
Architecturally, the device uses a NOR Flash core tied to a serial/parallel configuration controller, with dedicated CCLK, DIN/DOUT, and CF pins mapping directly to the FPGA configuration port. The 1.8 V internal core reduces power consumption versus 3.3 V PROMs, which is meaningful when the PROM is continuously powered alongside the FPGA.
Typical applications include Xilinx Virtex and Spartan FPGA configuration boot storage, industrial control boards, communications infrastructure, and test/measurement platforms that require reliable field-upgradable bitstream storage. For military and aerospace designs, AMD also offers the XQF32PVOG48M variant in the same family. When designing with this part, ensure that the FPGA configuration mode (serial vs. parallel) and density match the bitstream size, and verify that the JTAG chain supports ISP programming of the PROM.
Alternatives de remplacement direct pour XCF32PVOG48C — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec XCF32PVOG48C (même facteur de forme et même empreinte) — différant par Memory Size, Programmable Type, Interface, Memory Type, Package.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
XCF32PVO48C
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
XCF32PFS48C
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
XQF32PVOG48M
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
XCF16PVOG48C
✅ Remplacement direct✓ En stock
$45.1 / unité
Voir la fiche technique →XCF32PVO48I
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
XCF32PVOG48C Valeurs maximales et caractéristiques électriques
| Manufacturer | AMD (formerly Xilinx) |
| Type de mémoire | Platform Flash PROM (NOR Flash based) |
| Taille de mémoire | 32 Mbit (4 Mbyte) |
| Programmable Type | In-System Programmable via JTAG |
| Interface | Serial / Parallel configuration |
| Supply Voltage (VCCINT) | 1.65 V to 2.0 V |
| I/O Voltage Tolerance | 1.5 V to 3.3 V compatible |
| Boîtier | 48-pin TSOP (TFSOP) |
| Package Width | 18.40 mm |
| Logic Family | Low-Power Advanced CMOS NOR Flash |
| Configuration Compatibility | Xilinx Virtex, Spartan, CoolRunner, XC9500 series FPGAs |
| Operating Temperature (Commercial) | -40C to +85C |
| Programming Interface | JTAG / IEEE 1149.1 |
| Cascade Support | Yes (multi-PROM daisy-chain) |
| Lead Free | Yes |
| Statut RoHS | Compliant |
| Packaging | Tube |
Guide de configuration des broches du XCF32PVOG48C 18.40 mm
Configuration des broches du XCF32PVOG48C (boîtier 18.40 mm). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour XCF32PVOG48C.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
XCF32PVOG48C convient pour 6 applications: Xilinx Spartan-3 / Spartan-6 FPGA Boot Storage, Industrial Control Board Configuration Memory, Communication Infrastructure (Switch / Router Backplane), Test & Measurement Equipment Firmware Storage, Aerospace / Mil-Quad Form Factor Boards, Legacy Virtex-4 / Virtex-5 FPGA Boot Retrofits.
Xilinx Spartan-3 / Spartan-6 FPGA Boot Storage
The XCF32PVOG48C operates from a 1.65 V to 2.0 V VCC rail that aligns directly with Spartan-3/3E/6 FPGA VCCO supplies, eliminating a level shifter on the configuration bus. Its 32 Mbit capacity comfortably stores the configuration bitstream for any Spartan-3 device variant (XCS400 to XC3S5000 series), and the JTAG-based in-system programming lets the firmware team update PROM contents through the same chain as the FPGA. Cascade support allows two devices to be chained for Spartan-6 LX150/LX45 bitstreams exceeding 32 Mbit.
Recommandé
Industrial Control Board Configuration Memory
Industrial PLCs and motor-drive controllers use the XCF32PVOG48C to store the FPGA bitstream governing their DSP control loops, with the 1.8 V Platform Flash family offering lower standby current than 3.3 V PROMs for always-on field deployments. The 48-TSOP surface-mount package withstands standard reflow profiles, and the -40 C to +85 C commercial temperature grade covers typical industrial cabinet ambient. The 32 Mbit capacity leaves headroom for future bitstream revisions without redesigning the PCB footprint.
Recommandé
Communication Infrastructure (Switch / Router Backplane)
Routers and switches use the XCF32PVOG48C as the boot PROM for the line-card supervisor FPGAs handling packet processing and SERDES control. The 1.8 V VCCINT minimizes the always-on power budget on a dense backplane, while 3.3 V-tolerant I/O ports interface directly with multi-voltage FPGA configuration buses without extra components. JTAG ISP programming lets NCM teams service bitstream bugs across a deployed fleet without swapping hardware.
Recommandé
Test & Measurement Equipment Firmware Storage
Test instruments use the XCF32PVOG48C to store the FPGA bitstream responsible for stimulus generation, DSP capture, and protocol decoding. The 32 Mbit capacity is sufficient for large Virtex-4 LX25/LX40 image-generation bitstreams, and the JTAG re-programmability lets designers ship calibration updates to deployed instruments. Low power consumption keeps thermal budget predictable in sealed industrial chassis.
Recommandé
Aerospace / Mil-Quad Form Factor Boards
For boards that must double as industrial and MIL-grade builds, the XCF32PVOG48C is the preferred commercial part and the XQF32PVOG48M is the verified military-grade drop-in alternative sharing the identical 48-TSOP footprint. Designs that started with XCF32PVOG48C can be re-certified for harsh environments simply by substituting the XQF variant during line-build, without any PCB rework.
Recommandé
Legacy Virtex-4 / Virtex-5 FPGA Boot Retrofits
Designers maintaining deployed Virtex-4 LX/LXT and Virtex-5 LX/SXT boards use the XCF32PVOG48C as a 1.8 V low-power replacement for legacy 3.3V Platform Flash PROMs, because both Virtex-4 and the 1.8 V PROM share the same 1.5 V to 3.3 V tolerant configuration interface. This avoids redesigning the configuration pin mapping and reduces standby current on the backplane by ~40 percent.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour XCF32PVOG48C — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | XCF32PVO48C | XCF32PFS48C | XQF32PVOG48M | XCF16PVOG48C | XCF32PVO48I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 48-TSOP | 48-TSOP - same | 48-TSOP - same | 48-TSOP - same | 48-TSOP - same | 48-TSOP - same |
| Density | 32 Mbit | 32 Mbit | 32 Mbit | 32 Mbit | 16 Mbit | 32 Mbit |
| Operating Voltage | 1.65 V to 2.0 V | 1.65 V to 2.0 V | 1.65 V to 2.0 V | 1.65 V to 2.0 V | 1.65 V to 2.0 V | 1.65 V to 2.0 V |
| Temperature Grade | Commercial -40C to +85C | Commercial -40C to +85C | Commercial -40C to +85C | Military -55C to +125C | Commercial -40C to +85C | Industrial -40C to +85C |
| Programming Interface | JTAG / IEEE 1149.1 | JTAG / IEEE 1149.1 | JTAG / IEEE 1149.1 | JTAG / IEEE 1149.1 | JTAG / IEEE 1149.1 | JTAG / IEEE 1149.1 |
| Cascade Support | Yes | Yes | Yes | Yes | Yes | Yes |
| Configuration Mode | Serial / Parallel | Serial / Parallel | Serial only | Serial / Parallel | Serial / Parallel | Serial / Parallel |
| Availability | Last-time-buy | Last-time-buy | Obsolete | Active (military-grade) | NRND | Active |
Principaux différenciateurs
- Exact 32 Mbit density for full Spartan-6 LX16 bitstream storage (vs XCF16PVOG48C)
- Commercial-grade 1.8 V Platform Flash XL with verified drop-in upgrades (vs XQF32PVOG48M)
- Standard 1.65 to 2.0 V VCCINT range matches all Spartan-3/6 VCC rails (vs XCF32PFS48C (LQFP package variant))
Notes de conception
Estimated: at FPGA configuration when VCC is 1.8 V and the PROM is actively driving CCLK/DOUT at full speed, standby current remains below 25 mA per the AMD Platform Flash datasheet, but it is recommended to power the XCF32PVOG48C from a regulated LDO rail sharing the FPGA VCCO_0 supply. Avoid sourcing its VCCINT directly from a noisy switching converter without a 10 uF ceramic + 0.1 uF decoupling network placed within 5 mm of the pin.
Route the JTAG chain (TDI/TDO/TMS/TCK) as a daisy chain from the FPGA to the XCF32PVOG48C with stub lengths under 30 mm. Place the TSOP on the same board side as the FPGA JTAG header so taps are not interrupted by connectors. Keep CCLK trace matched to 50 ohm impedance when using parallel mode; for serial mode match the impedance but accept a slightly relaxed 65 ohm spec.
Do not confuse the 1.8 V Platform Flash XCF32P family with the 3.3 V Platform Flash XCF32S family - they share the 48-TSOP footprint but are not pin-compatible at the VCC rail and may permanently damage the 1.8 V part. Always verify the 'V' versus 'S' family code in the part number (XCF32PVOG48C versus XCF32PSOG48C) and confirm VCCINTRail before PCB layout checkout.
Informations de conformité
Lead-free / RoHS-compliant per AMD product page (VOG48C suffix indicates lead-free); AEC-Q100 not applicable because PROM is not an automotive-grade device; choose XQF32PVOG48M for MIL-grade / aerospace qualification.
