XCF32PVOG48C - 32Mb FPGA Config PROM 1.8V 48-TSOP | AMD
부품 번호: XCF32PVOG48C ⚠ 최종 구매| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $32.45 | $32.45 |
| 10 | $28.9 | $289.00 |
| 100 | $25.1 | $2,510.00 |
| 500 | $22.4 | $11,200.00 |
| 1,000 | $19.85 | $19,850.00 |
XCF32PVOG48C 개요
A Platform Flash configuration PROM is a non-volatile NOR Flash memory device whose primary role is to hold the FPGA bitstream and present it to the target FPGA over a serial or parallel configuration interface. In the broader memory hierarchy it sits under EEPROM and Flash PROM, and above raw NOR Flash, providing a pre-validated, FPGA-aware configuration storage medium. It relieves the system designer of placing a separate boot Flash on the board and is typically the first device in the FPGA configuration chain.
Key electrical features include a 32 Mbit (4 Mbyte) organized as 1-bit-wide serial/parallel PROM, a 1.65 V to 2.0 V operating voltage range with 3.3 V tolerant I/O pins, low-power advanced CMOS Flash technology, an in-system programmable JTAG/IEEE 1149.1 interface, and cascade support for storing larger bitstreams. The 48-pin TSOP provides a compact, surface-mount footprint compatible with standard PCB assembly lines.
Architecturally, the device uses a NOR Flash core tied to a serial/parallel configuration controller, with dedicated CCLK, DIN/DOUT, and CF pins mapping directly to the FPGA configuration port. The 1.8 V internal core reduces power consumption versus 3.3 V PROMs, which is meaningful when the PROM is continuously powered alongside the FPGA.
Typical applications include Xilinx Virtex and Spartan FPGA configuration boot storage, industrial control boards, communications infrastructure, and test/measurement platforms that require reliable field-upgradable bitstream storage. For military and aerospace designs, AMD also offers the XQF32PVOG48M variant in the same family. When designing with this part, ensure that the FPGA configuration mode (serial vs. parallel) and density match the bitstream size, and verify that the JTAG chain supports ISP programming of the PROM.
드롭인 대체품: XCF32PVOG48C — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: XCF32PVOG48C (동일 폼 팩터 및 풋프린트) — 차이점: Memory Size, Programmable Type, Interface, Memory Type, Package.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
XCF32PVO48C
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
XCF32PFS48C
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
XQF32PVOG48M
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
XCF16PVOG48C
✅ 드롭인✓ 재고 있음
$45.1 / 개
데이터시트 보기 →XCF32PVO48I
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
XCF32PVOG48C 최대 정격 & 전기적 특성
| Manufacturer | AMD (formerly Xilinx) |
| 메모리 유형 | Platform Flash PROM (NOR Flash based) |
| 메모리 크기 | 32 Mbit (4 Mbyte) |
| Programmable Type | In-System Programmable via JTAG |
| 인터페이스 | Serial / Parallel configuration |
| Supply Voltage (VCCINT) | 1.65 V to 2.0 V |
| I/O Voltage Tolerance | 1.5 V to 3.3 V compatible |
| 패키지 | 48-pin TSOP (TFSOP) |
| Package Width | 18.40 mm |
| Logic Family | Low-Power Advanced CMOS NOR Flash |
| Configuration Compatibility | Xilinx Virtex, Spartan, CoolRunner, XC9500 series FPGAs |
| Operating Temperature (Commercial) | -40C to +85C |
| Programming Interface | JTAG / IEEE 1149.1 |
| Cascade Support | Yes (multi-PROM daisy-chain) |
| Lead Free | Yes |
| RoHS 상태 | Compliant |
| Packaging | Tube |
XCF32PVOG48C 18.40 mm 핀 구성 가이드
XCF32PVOG48C(18.40 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: XCF32PVOG48C.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
XCF32PVOG48C 적합 용도: 6 애플리케이션s: Xilinx Spartan-3 / Spartan-6 FPGA Boot Storage, Industrial Control Board Configuration Memory, Communication Infrastructure (Switch / Router Backplane), Test & Measurement Equipment Firmware Storage, Aerospace / Mil-Quad Form Factor Boards, Legacy Virtex-4 / Virtex-5 FPGA Boot Retrofits.
Xilinx Spartan-3 / Spartan-6 FPGA Boot Storage
The XCF32PVOG48C operates from a 1.65 V to 2.0 V VCC rail that aligns directly with Spartan-3/3E/6 FPGA VCCO supplies, eliminating a level shifter on the configuration bus. Its 32 Mbit capacity comfortably stores the configuration bitstream for any Spartan-3 device variant (XCS400 to XC3S5000 series), and the JTAG-based in-system programming lets the firmware team update PROM contents through the same chain as the FPGA. Cascade support allows two devices to be chained for Spartan-6 LX150/LX45 bitstreams exceeding 32 Mbit.
추천
Industrial Control Board Configuration Memory
Industrial PLCs and motor-drive controllers use the XCF32PVOG48C to store the FPGA bitstream governing their DSP control loops, with the 1.8 V Platform Flash family offering lower standby current than 3.3 V PROMs for always-on field deployments. The 48-TSOP surface-mount package withstands standard reflow profiles, and the -40 C to +85 C commercial temperature grade covers typical industrial cabinet ambient. The 32 Mbit capacity leaves headroom for future bitstream revisions without redesigning the PCB footprint.
추천
Communication Infrastructure (Switch / Router Backplane)
Routers and switches use the XCF32PVOG48C as the boot PROM for the line-card supervisor FPGAs handling packet processing and SERDES control. The 1.8 V VCCINT minimizes the always-on power budget on a dense backplane, while 3.3 V-tolerant I/O ports interface directly with multi-voltage FPGA configuration buses without extra components. JTAG ISP programming lets NCM teams service bitstream bugs across a deployed fleet without swapping hardware.
추천
Test & Measurement Equipment Firmware Storage
Test instruments use the XCF32PVOG48C to store the FPGA bitstream responsible for stimulus generation, DSP capture, and protocol decoding. The 32 Mbit capacity is sufficient for large Virtex-4 LX25/LX40 image-generation bitstreams, and the JTAG re-programmability lets designers ship calibration updates to deployed instruments. Low power consumption keeps thermal budget predictable in sealed industrial chassis.
추천
Aerospace / Mil-Quad Form Factor Boards
For boards that must double as industrial and MIL-grade builds, the XCF32PVOG48C is the preferred commercial part and the XQF32PVOG48M is the verified military-grade drop-in alternative sharing the identical 48-TSOP footprint. Designs that started with XCF32PVOG48C can be re-certified for harsh environments simply by substituting the XQF variant during line-build, without any PCB rework.
추천
Legacy Virtex-4 / Virtex-5 FPGA Boot Retrofits
Designers maintaining deployed Virtex-4 LX/LXT and Virtex-5 LX/SXT boards use the XCF32PVOG48C as a 1.8 V low-power replacement for legacy 3.3V Platform Flash PROMs, because both Virtex-4 and the 1.8 V PROM share the same 1.5 V to 3.3 V tolerant configuration interface. This avoids redesigning the configuration pin mapping and reduces standby current on the backplane by ~40 percent.
추천
추천 제품 요약
엔지니어링 참조 데이터: XCF32PVOG48C — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | XCF32PVO48C | XCF32PFS48C | XQF32PVOG48M | XCF16PVOG48C | XCF32PVO48I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 48-TSOP | 48-TSOP - same | 48-TSOP - same | 48-TSOP - same | 48-TSOP - same | 48-TSOP - same |
| Density | 32 Mbit | 32 Mbit | 32 Mbit | 32 Mbit | 16 Mbit | 32 Mbit |
| Operating Voltage | 1.65 V to 2.0 V | 1.65 V to 2.0 V | 1.65 V to 2.0 V | 1.65 V to 2.0 V | 1.65 V to 2.0 V | 1.65 V to 2.0 V |
| Temperature Grade | Commercial -40C to +85C | Commercial -40C to +85C | Commercial -40C to +85C | Military -55C to +125C | Commercial -40C to +85C | Industrial -40C to +85C |
| Programming Interface | JTAG / IEEE 1149.1 | JTAG / IEEE 1149.1 | JTAG / IEEE 1149.1 | JTAG / IEEE 1149.1 | JTAG / IEEE 1149.1 | JTAG / IEEE 1149.1 |
| Cascade Support | Yes | Yes | Yes | Yes | Yes | Yes |
| Configuration Mode | Serial / Parallel | Serial / Parallel | Serial only | Serial / Parallel | Serial / Parallel | Serial / Parallel |
| Availability | Last-time-buy | Last-time-buy | Obsolete | Active (military-grade) | NRND | Active |
주요 차별점
- Exact 32 Mbit density for full Spartan-6 LX16 bitstream storage (vs XCF16PVOG48C)
- Commercial-grade 1.8 V Platform Flash XL with verified drop-in upgrades (vs XQF32PVOG48M)
- Standard 1.65 to 2.0 V VCCINT range matches all Spartan-3/6 VCC rails (vs XCF32PFS48C (LQFP package variant))
설계 노트
Estimated: at FPGA configuration when VCC is 1.8 V and the PROM is actively driving CCLK/DOUT at full speed, standby current remains below 25 mA per the AMD Platform Flash datasheet, but it is recommended to power the XCF32PVOG48C from a regulated LDO rail sharing the FPGA VCCO_0 supply. Avoid sourcing its VCCINT directly from a noisy switching converter without a 10 uF ceramic + 0.1 uF decoupling network placed within 5 mm of the pin.
Route the JTAG chain (TDI/TDO/TMS/TCK) as a daisy chain from the FPGA to the XCF32PVOG48C with stub lengths under 30 mm. Place the TSOP on the same board side as the FPGA JTAG header so taps are not interrupted by connectors. Keep CCLK trace matched to 50 ohm impedance when using parallel mode; for serial mode match the impedance but accept a slightly relaxed 65 ohm spec.
Do not confuse the 1.8 V Platform Flash XCF32P family with the 3.3 V Platform Flash XCF32S family - they share the 48-TSOP footprint but are not pin-compatible at the VCC rail and may permanently damage the 1.8 V part. Always verify the 'V' versus 'S' family code in the part number (XCF32PVOG48C versus XCF32PSOG48C) and confirm VCCINTRail before PCB layout checkout.
규정 준수 정보
Lead-free / RoHS-compliant per AMD product page (VOG48C suffix indicates lead-free); AEC-Q100 not applicable because PROM is not an automotive-grade device; choose XQF32PVOG48M for MIL-grade / aerospace qualification.
