10M08SAU169I7P - MAX 10 FPGA 8K LE UFBGA-169 | Altera
MPN: 10M08SAU169I7P ✓ פעיל10M08SAU169I7P סקירה
A MAX 10 FPGA belongs to the non-volatile FPGA category, sitting hierarchically below SRAM-only FPGAs (e.g. Cyclone V) and above CPLDs in terms of logic density and embedded feature set. The MAX 10 family integrates user flash, ADC, and DSP blocks directly on-die, allowing single-chip implementation of mixed-signal control designs. Compared to pure CPLDs, MAX 10 devices offer substantially higher logic capacity, embedded multipliers, and DSP support, while preserving instant-on capability from on-chip flash.
Key features of the 10M08SAU169I7P include 8,000 logic elements (LEs), 387 Kbits of embedded user SRAM (M9K blocks), 56 embedded 18x18 multipliers, two integrated PLLs, and up to 130 general-purpose I/O pins. The device supports LVCMOS, LVDS, SSTL, and differential I/O standards at data rates suitable for parallel sensor buses, low-speed video, and industrial communication interfaces such as SPI, I2C, UART, and CAN.
Typical applications include industrial motor control and PLC interfaces, sensor aggregation hubs, low-cost video processing bridges, machine vision pre-processors, and I/O expansion for SoC-based designs. The integrated 12-bit ADC (up to 17 channels) and DSP blocks make the part especially attractive for mixed-signal data acquisition and signal conditioning tasks.
When designing with the 10M08SAU169I7P, plan power sequencing on the 3.3V/2.5V/1.2V rails, observe the BGA escape routing density in the UFBGA-169 footprint, and use the Quartus Prime toolchain for synthesis and place-and-route.
חלופות תחליף ישיר עבור 10M08SAU169I7P — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם 10M08SAU169I7P (אותו גורם צורה וטביעת רגל) — שונים ב Operating Temperature, Package, PLLs, Process Technology, Speed Grade.
10M08SAU169C8G
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←10M08SAU169A7G
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←10M04SAU169I7G
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←10M08SAE144I7G
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←10M08SAM153I7G
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←10M08SAU169I7P דירוגים מרביים ומאפיינים חשמליים
| Manufacturer | Altera (Intel) |
| Family | MAX 10 |
| Logic Elements | 8,000 |
| Embedded Memory | 387,072 bits (M9K blocks) |
| Embedded Multipliers | 56 (18x18) |
| Maximum User I/O | 130 |
| מארז | 169-UFBGA (UBGA-169, 11x11 mm) |
| Core Voltage | 1.2 V |
| Process Technology | 55 nm |
| טמפרטורת פעולה | -40C to +100C (Industrial) |
| Speed Grade | S (slowest) |
| On-chip Flash | Yes (non-volatile configuration) |
| PLLs | 2 |
| סוג הרכבה | Surface Mount (BGA) |
| סטטוס RoHS | Compliant |
מדריך תצורת פינים של 10M08SAU169I7P 169-ufbga (ubga-169, 11x11 mm)
תצורת פינים עבור 10M08SAU169I7P (מארזת 169-ufbga (ubga-169, 11x11 mm)). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור 10M08SAU169I7P.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
10M08SAU169I7P מתאים עבור 6 יישוםs: Industrial Motor Control, PLC and I/O Expansion, Sensor Aggregation Hub, Low-Cost Video Bridging, Automotive Infotainment Auxiliary, Test & Measurement Front-End.
Industrial Motor Control
The 10M08SAU169I7P suits single-axis and multi-axis industrial motor control designs where its 8,000 LEs and 56 18x18 multipliers can host Field-Oriented Control (FOC) IP cores. The 12-bit on-chip ADC samples phase currents at high rate while DSP blocks execute Clarke/Park transforms. The UFBGA-169 footprint allows compact PCB integration near power stages. Industrial -40C to +100C rating supports factory-floor deployment.
מומלץ
PLC and I/O Expansion
Used as an I/O expander or protocol-bridging coprocessor alongside a main MCU/SoC in PLC backplanes, the 10M08SAU169I7P offers 130 user I/Os supporting LVCMOS 3.3V, 2.5V, 1.8V, and LVDS standards. This enables glue-logic functions, signal level translation, and protocol conversion (e.g. parallel-to-SPI, UART-to-CAN). The non-volatile on-chip flash eliminates external boot devices, simplifying PLC module design.
מומלץ
Sensor Aggregation Hub
The 10M08SAU169I7P aggregates multiple sensor streams (SPI, I2C, UART, analog via on-chip ADC) in industrial IoT edge nodes. Its 8K LEs handle protocol framing and pre-processing while 387 Kbits SRAM buffers bursts before forwarding to a higher-level processor. The industrial temperature range and small UFBGA-169 footprint suit DIN-rail mounted edge gateways with limited thermal budget.
מומלץ
Low-Cost Video Bridging
The 10M08SAU169I7P bridges low-resolution CMOS sensor parallel interfaces to MIPI CSI-2 or RGB-to-MIPI converters in cost-sensitive embedded vision applications. The 56 18x18 multipliers support real-time color-space conversion and scaling. The integrated flash configuration supports instant-on camera initialization. This is suitable for machine vision pre-processors, smart appliances, and entry-level surveillance cameras.
מומלץ
Automotive Infotainment Auxiliary
For non-safety-critical automotive infotainment auxiliary functions (e.g. display backlight control, button matrix scanning, audio routing glue logic), the 10M08SAU169A7G variant (AEC-Q100 screened) is a more stringent drop-in upgrade. The 10M08SAU169I7P itself suits industrial-grade automotive adjacent applications where AEC-Q100 is not strictly required. The UFBGA-169 footprint allows compact module placement.
מומלץ
Test & Measurement Front-End
In bench-top test instruments and data loggers, the 10M08SAU169I7P serves as a flexible front-end with its on-chip 12-bit ADC (multi-channel) plus 130 GPIO for instrument switching matrices. The DSP blocks implement real-time FIR/IIR filtering on acquired signals. Industrial temperature range and non-volatile boot make it suitable for portable and lab-deployed equipment with field-upgrade requirements.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור 10M08SAU169I7P — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | 10M08SAU169C8G | 10M08SAU169A7G | 10M04SAU169I7G |
|---|---|---|---|---|
| Package | 169-UFBGA (11x11 mm) | 169-UFBGA (11x11 mm) - same | 169-UFBGA (11x11 mm) - same | 169-UFBGA - same |
| Brand | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) |
| Family | MAX 10 | MAX 10 | MAX 10 | MAX 10 |
| Logic Elements | 8,000 | 8,000 | 8,000 | 4,000 (-50%) |
| Embedded Memory | 387,072 bits | 387,072 bits | 387,072 bits | 189,440 bits (-51%) |
| Temperature Grade | Industrial (-40C to +100C) | Commercial (0C to +85C) | Automotive (AEC-Q100) | Industrial (-40C to +100C) |
| Speed Grade | S (slowest) | 8 (faster) | 7 | 7 |
| Embedded Multipliers (18x18) | 56 | 56 | 56 | 30 (-46%) |
| Maximum User I/O | 130 | 130 | 130 | 130 |
מבדילים עיקריים
- Industrial temperature range with full MAX 10 feature set (לעומת10M08SAU169C8G)
- Largest logic capacity in the 169-UFBGA MAX 10 footprint (לעומת10M04SAU169I7G)
- Slower speed grade gives better power/thermal margin (לעומת10M08SAU169C8G (speed grade 8))
הערות תכנון
The 169-UFBGA package has 0.65 mm ball pitch on an 11x11 mm substrate. Use a 4-layer PCB with microvia-in-pad or dogbone fan-out escape routing for high-density signals. Per Altera MAX 10 hardware design guidelines, place at least 4 ground vias in the central BGA thermal/ground pad to ensure proper thermal dissipation and ground return path integrity.
Estimated: MAX 10 FPGA core draws approximately 100-300 mA at 1.2V depending on logic utilization. The UFBGA-169 package requires a 3.3V auxiliary supply (VCCA) and 2.5V/1.8V selectable supply for I/O banks per the MAX 10 device handbook. Use low-dropout regulators with 1% accuracy and add bulk + decoupling capacitors (10 uF + 100 nF) close to each power pin pair.
Do not assume UFBGA-169 is interchangeable with EQFP-144 or MBGA-153 pinouts - the ball map differs even at the same family. When migrating designs between MAX 10 packages, regenerate the Quartus Prime pin assignments from scratch. Also note that the 'S' speed grade is the slowest; for designs requiring higher Fmax, use speed grade 7 or 8 variants.
מידע על תאימות
RoHS and REACH compliant per Altera product page. Not AEC-Q100 qualified - choose 10M08SAU169A7G for automotive applications.
