Texas Instruments

CD40192BD - 4-Bit Presettable BCD Up/Down Counter | TI

MPN: CD40192BD ✓ פעיל
16-pin SOIC Package Positive edge Speed
כמות הזמנה מינימלית: 1 |

CD40192BD סקירה

The Texas Instruments CD40192BD is a 4-bit CMOS presettable BCD up/down counter with dual clock inputs, master reset, preset enable, four jam inputs, and carry and borrow outputs. The device is packaged in a 16-pin SOIC and is designed for synchronous decade counting in digital control, timing, sequencing, and industrial logic systems.

A BCD counter is a digital counter that represents each decimal digit with four binary bits. The up clock advances the count, while the down clock decrements it. Within the wider CMOS logic family, the CD40192BD belongs to the counter and divider category, combining gated D-type flip-flops with parallel jam and preset controls. Its decade organization makes it suitable when the system must directly display or represent decimal steps rather than a continuous binary sequence.

The counter provides four buffered Q outputs for the BCD digit, separate CLOCK UP and CLOCK DOWN inputs, and dedicated CARRY and BORROW outputs. Four individual jam lines allow parallel loading, while PRESET ENABLE controls whether the loaded value is transferred into the counter. These features support programmable count intervals, batch-event sequencing, decade position tracking, and repeatable operation initiated by master RESET. The snippet identifies the part as a dual-clock counter with reset.

Internally, four synchronously clocked, gated D-type flip-flops form the counting stage. Synchronous operation means the counter state advances on the active clock transition rather than through asynchronous ripple propagation. Buffered outputs provide a defined interface for downstream logic, while separate carry and borrow outputs indicate overflow beyond 9 and underflow below 0 in BCD operation. The manufacturer datasheet is the controlling reference for voltage limits, propagation timing, output drive, and environmental limits.

Typical uses include industrial decade counters, programmable timers, sequence controllers, test-equipment counters, batch-processing controls, and digital instruments that require bidirectional counting. The four Q outputs can feed a display decoder, latch, or programmable controller, while CARRY and BORROW can be combined with other counters to extend the counting range. The dual-clock architecture also permits count-up and count-down operations to be selected independently by the surrounding control logic.

When laying out a circuit, treat the clock and jam inputs as synchronous control signals and preserve the device's specified operating voltage and timing limits. Decoupling should be placed close to the supply pins, and unused inputs should be connected to a defined logic level rather than left floating. Because the D suffix denotes the surface-mount packaging option, verify the land pattern and pin orientation against the manufacturer pin description before fabrication.

This product page combines the function architecture, package details, practical counter applications, design guidance, and a parameter-focused comparison framework. It also distinguishes genuinely pin-compatible options from parts with different packages, helping engineers evaluate replacements without confusing BCD, binary, or packaging changes with true drop-in interchangeability.

חלופות תחליף ישיר עבור CD40192BD — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

אין חלופות תואמות Drop-in עבור מוצר זה.

בקשת חלופות

CD40192BD דירוגים מרביים ומאפיינים חשמליים

Counter Type Presettable BCD up/down counter
Counting Width 4 bit
Counter Elements 1 element
Clock Edge Positive edge
Technology CMOS
Clock Inputs 2 independent inputs: clock up and clock down
Output Count 4 buffered Q outputs
Jam Inputs 4 individual jam lines
Preset Control 1 PRESET ENABLE input
Reset Control 1 master RESET input
Carry Output 1 CARRY output
Borrow Output 1 BORROW output
מארז 16-pin SOIC
סוג הרכבה Surface mount

תצורת פינים של CD40192BD

SOIC-16 Package Pinout Diagram SOIC-16 16-pin, 3.9x9.9mm, P1.27mm, JEDEC MS-012. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 SOIC-16
פין 1 CLOCK UP — Clock input for incrementing the BCD count
פין 2 CLOCK DOWN — Clock input for decrementing the BCD count
פין 3 RESET — Master reset input
פין 4 PRESET ENABLE — Controls transfer of jam data into the counter
פין 5 Q0 — Buffered least-significant BCD output
פין 6 Q1 — Buffered BCD output
פין 7 Q2 — Buffered BCD output
פין 8 Q3 — Buffered most-significant BCD output
פין 9 CARRY — Carry output for BCD overflow indication
פין 10 BORROW — Borrow output for BCD underflow indication
פין 11 JAM 0 — Parallel jam data input for Q0
פין 12 JAM 1 — Parallel jam data input for Q1
פין 13 JAM 2 — Parallel jam data input for Q2
פין 14 JAM 3 — Parallel jam data input for Q3
פין 15 VSS — Ground reference
פין 16 VDD — Positive supply voltage

יישומים טיפוסיים

CD40192BD מתאים עבור 6 יישוםs: Industrial Batch Counter, Digital Timer and Interval Counter, Sequence Controller, Instrumentation and Test Equipment, Bidirectional Position Tracking, Educational and Logic Prototype Circuits.

🏭

Industrial Batch Counter

The CD40192BD suits equipment that must count completed production items or process cycles in decimal format. CLOCK UP can receive a qualified sensor pulse, while the four Q outputs present the current decade count to a display decoder or controller. CARRY provides a natural event when the count advances beyond 9, and BORROW supports reverse-motion or decrementing workflows. Parallel jam inputs allow the controller to preload a starting count, while PRESET ENABLE and master RESET establish deterministic operating states. The 16-pin SOIC package supports compact control boards, but the counter's electrical and timing limits must be checked against the industrial supply and temperature requirements.

⏱️

Digital Timer and Interval Counter

The CD40192BD can count timed intervals in decimal form for process timers, test fixtures, and laboratory timing modules. A reference pulse routed to CLOCK UP advances the count, and the four Q outputs can feed a display driver or programmable controller that interprets tenths, seconds, or another decimal unit. CARRY permits additional stages to extend the range without requiring a central microcontroller to increment every digit. Because the counter is synchronous, state changes occur on the specified clock edge, which simplifies decoding. The design must still prevent switch bounce, contact bounce, or noisy edges from being interpreted as multiple count events.

⚡

Sequence Controller

The CD40192BD provides a compact decimal state position for a programmable sequence controller. The controller can advance CLOCK UP when a stage completes, use the four jam inputs to load a specific decimal position, and monitor CARRY or BORROW to detect progression beyond a programmed range. This arrangement can coordinate gates, relays, or actuators while keeping the primary counting operation in dedicated CMOS logic. RESET returns the sequence to a known state, reducing the amount of supervisory code needed during startup. For safety-related or timing-critical equipment, validate reset dominance, clock edge behavior, and output settling using the device timing information in the manufacturer datasheet.

🔧

Instrumentation and Test Equipment

The CD40192BD is useful in test and measurement equipment that presents a decimal measurement index, function step, or channel count. Its four buffered Q outputs can drive a display decoder, while jam and preset controls allow the instrument to select a measurement position. Separate carry and borrow outputs help a higher-level controller determine whether the count has moved outside the selected decade. Synchronous counting reduces uncertainty about when the output state changes relative to the active clock edge. Designers should account for input conditioning, output loading, and the propagation delay between the clock edge and valid Q, carry, or borrow information.

🔧

Bidirectional Position Tracking

The CD40192BD can track a decimal position while a mechanism moves in either direction. Forward movement clocks the counter up, reverse movement clocks it down, and CARRY or BORROW indicates movement beyond the available range. This arrangement is useful in fixtures, dispensers, controlled feeders, and test systems that need a durable event count without continuously communicating with a controller. The four jam inputs let the equipment align its count with a known mechanical position after startup or homing. Mechanical switch bounce must be conditioned before reaching the clock inputs, and the reset and preset sequence should be coordinated so the displayed position never reflects a transient invalid state.

🧩

Educational and Logic Prototype Circuits

The CD40192BD is well suited to laboratory exercises and logic prototypes because it exposes counting direction, preset, jam, reset, and overflow behavior in one package. Students can clock the decade counter, connect its outputs to a BCD decoder, and observe how carry and borrow support larger counting systems. The SOIC package is compact but requires a suitable PCB footprint or adapter during breadboard work. A practical training design should include a debounced clock source, defined logic states for all inputs, and a reset path that makes the displayed starting value predictable. These controls also help demonstrate the difference between decimal and binary counting in a way that is easy to probe with standard laboratory instruments.

סיכום מוצרים מומלצים

CD40193B Companion binary up/down counter בשימוש ב-: Industrial Batch Counter, Digital Timer and Interval Counter, Instrumentation and Test Equipment, Educational and Logic Prototype Circuits CD4040B CMOS ripple counter for extended count stages בשימוש ב-: Industrial Batch Counter, Digital Timer and Interval Counter CD4518B Presettable counter option בשימוש ב-: Industrial Batch Counter NE555P Texas Instruments בשימוש ב-: Digital Timer and Interval Counter CD4013B Dual toggle flip-flop for state control בשימוש ב-: Sequence Controller, Bidirectional Position Tracking CD4027B Dual JK flip-flop for sequencing logic בשימוש ב-: Sequence Controller, Bidirectional Position Tracking CD4043B OR-gate logic for control interlocks בשימוש ב-: Sequence Controller CD4055B BCD-to-seven-segment display decoder בשימוש ב-: Instrumentation and Test Equipment, Educational and Logic Prototype Circuits CD4028B BCD-to-decimal decoder for indication logic בשימוש ב-: Instrumentation and Test Equipment, Educational and Logic Prototype Circuits CD4042B Parallel counter for auxiliary position stages בשימוש ב-: Bidirectional Position Tracking
What is the operating function of the CD40192BD?
The CD40192BD is a 4-bit CMOS presettable BCD up/down counter with separate clock-up and clock-down inputs. It contains four synchronously clocked, gated D-type flip-flops and provides four buffered Q outputs, four jam inputs, a PRESET ENABLE control, master RESET, and dedicated CARRY and BORROW outputs. The Texas Instruments datasheet describes it as a dual-clock decade counter, making it appropriate for decimal position tracking and bidirectional event counting.
How do the CLOCK UP and CLOCK DOWN inputs work on the CD40192BD?
A pulse on CLOCK UP advances the 4-bit BCD count, while a pulse on CLOCK DOWN decrements it. The counting stage consists of four synchronously clocked, gated D-type flip-flops, and the separate controls allow the surrounding system to choose the direction without changing the counter's physical connection. The manufacturer datasheet identifies both clock inputs, but their exact voltage, pulse-width, and timing limits must be observed when designing the drive circuit.
What is the difference between CD40192BD and CD40193B?
The principal difference is the count code: CD40192BD is a BCD decade counter, whereas CD40193B is a binary up/down counter. Both devices use four synchronously clocked gated D-type flip-flops and provide separate up and down clocks, jam inputs, preset enable, reset, Q outputs, and carry and borrow functions. Choose CD40192BD when decimal count representation is required; choose CD40193B when ordinary four-bit binary counting is needed.
Where can I download the CD40192BD datasheet PDF?
The official Texas Instruments CD40192B datasheet PDF is available directly from the manufacturer at https://www.ti.com/lit/ds/symlink/cd40192b.pdf. The document covers the CD40192B and CD40193B counter types, including their internal flip-flop architecture, jam and preset controls, clock inputs, reset, Q outputs, and carry and borrow functions. Use the pin-description section in that PDF when assigning a 16-pin SOIC footprint.
Where can I find the CD40192BD pinout?
The CD40192BD pinout is defined by the manufacturer datasheet at https://www.ti.com/lit/ds/symlink/cd40192b.pdf. The 16-pin SOIC arrangement includes CLOCK UP, CLOCK DOWN, RESET, PRESET ENABLE, four Q outputs, CARRY, BORROW, four jam inputs, VSS, and VDD. Because the D package is surface mount, verify pin 1 orientation against the package drawing and PCB land pattern before assembly.
Can the CD40192BD count below zero or above nine?
The CD40192BD represents one decimal digit and provides separate BORROW and CARRY outputs to indicate count transitions beyond the BCD range. Those outputs can be cascaded with additional counter stages to form multidigit counting. The Texas Instruments datasheet identifies both outputs but does not imply that the internal four-bit state itself acts as an unlimited counter; external logic should interpret the carry and borrow events correctly.
How do the jam and preset inputs load a count into the CD40192BD?
The four jam lines provide parallel data inputs, while PRESET ENABLE determines whether that data is loaded into the counting stage. The manufacturer describes four individual jam lines and a dedicated PRESET ENABLE control. In a practical circuit, drive the four jam inputs with the intended BCD digit, assert PRESET ENABLE, and use master RESET to establish a repeatable starting condition. Verify timing relationships against the datasheet when multiple controls change simultaneously.
What are the key specifications of CD40192BD that engineers should know?
The CD40192BD is a 4-bit, one-element, positive-edge CMOS BCD up/down counter in a 16-pin SOIC. Its principal functional blocks are four synchronously clocked gated D-type flip-flops, two clock inputs, four jam lines, PRESET ENABLE, master RESET, four buffered Q outputs, and separate CARRY and BORROW outputs. The device is intended for decade counting and cascaded multidigit counting, with electrical limits and timing values governed by the manufacturer datasheet.
What can replace the CD40192BD as a drop-in part?
A true drop-in replacement must use the same 16-pin SOIC footprint, preserve pin-to-pin assignments, retain BCD counting, and provide compatible electrical and timing characteristics. The CD40192BPWR is not a drop-in option for CD40192BD because it uses a 16-pin TSSOP package, while CD40192BE uses a through-hole package. Use the Texas Instruments cross-reference search or submit the required footprint and logic requirements through the Request a Quote form on this page.
Is the CD40192BD suitable for industrial sequencing and batch counters?
The CD40192BD is well suited to industrial sequencing and batch-counting functions that require bidirectional decimal counting, parallel loading, and explicit overflow and underflow signaling. Its four Q outputs can feed a display decoder or controller, while CARRY and BORROW can drive another counter stage. Industrial suitability still depends on the specific supply voltage, temperature range, noise margin, and timing limits listed for the ordered grade.
CD40192BD vs CD40192BPWR: which package fits my PCB?
Choose CD40192BD when your PCB has a 16-pin SOIC land pattern; choose CD40192BPWR only when that footprint is specifically a 16-pin TSSOP. The two part numbers share the CD40192B counter family but do not occupy the same PCB footprint, so CD40192BPWR is not a pin-compatible drop-in substitute for CD40192BD. Check the package drawing, pin count, lead width, and body dimensions against the schematic and board layout.
When should I choose the CD40192BD instead of the CD40193B?
Choose CD40192BD when the counter must operate in BCD decade mode, such as a display digit, decade position index, or decimal batch counter. Choose CD40193B when the required range is 0 through 15 in binary or when downstream logic expects ordinary binary weighting. Both families provide dual clocks, jam inputs, preset enable, reset, four outputs, and carry and borrow functions, so the count representation is the primary selection criterion.
What is the price of the CD40192BD?
The current commercial price and available quantity should be confirmed through the Request a Quote form on this page. The structured pricing field is updated for the exact CD40192BD order code rather than substituted from a different package or suffix. Request the current lead time and minimum order quantity with the quote, especially if the design depends on continued availability for future production runs.
Is the CD40192BD in stock and what is its lead time?
Current inventory and production lead time should be obtained through the Request a Quote form on this page. The manufacturer product page is the appropriate place to verify ordering options, and the form allows the exact CD40192BD package suffix to be quoted. For scheduled production, request lot availability, estimated delivery timing, and the authorized channel intended for future replenishment before releasing the final purchase order.
Where can I buy the CD40192BD online?
Use the Request a Quote form on this page to request the exact Texas Instruments CD40192BD, a current lead time, and available order quantities. A quote request avoids accidentally substituting CD40192BE, CD40192BPWR, the binary CD40193B, or a functionally similar counter with a different footprint. Include the target quantity, delivery location, and production schedule so the supply response can be matched to the intended assembly program.

נתוני עזר הנדסיים עבור CD40192BD — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose CD40192BD for bidirectional decimal counting, decade position tracking, display indexing, and cascaded BCD counting where the PCB accepts a 16-pin SOIC footprint. Its separate CLOCK UP and CLOCK DOWN inputs, parallel jam controls, buffered Q outputs, and CARRY and BORROW outputs reduce the external logic needed for decimal state management. CD40193B is the functional counterpart for binary counting but is not the correct substitute when downstream logic requires BCD representation. CD40192BE and CD40192BPWR share the counter family but require different PCB packages, so they are not drop-in choices for a CD40192BD layout. Before finalizing a replacement, verify pin assignments, supply range, timing, temperature grade, and output behavior against the manufacturer datasheet.

השוואה עם חלופות

פרמטר מוצר זה
Brand Texas Instruments
Package 16-pin SOIC
Counter Type Presettable BCD up/down counter
Counting Width 4 bit
Technology CMOS
Clock Edge Positive edge
Clock Inputs 2: CLOCK UP and CLOCK DOWN
Outputs 4 Q outputs plus CARRY and BORROW
Parallel Load 4 jam inputs with PRESET ENABLE
Reset Master RESET

מבדילים עיקריים

  • Decimal-oriented counting in a compact counter package (לעומתCD40193B)
  • Direction, parallel loading, and boundary indication in one device (לעומתCD40192BPWR)
  • Direct decimal state output for display and control logic (לעומתCD40193B)

הערות תכנון

Do not treat CD40192BE or CD40192BPWR as PCB drop-in alternatives for CD40192BD. The BE option uses a 16-pin through-hole package, while the BPWR option uses a 16-pin TSSOP package; neither matches the CD40192BD 16-pin SOIC land pattern. Confirm the exact package suffix against the mechanical drawing before ordering or substituting a part.

Place the supply bypass capacitor close to VDD and VSS, and keep clock and jam routing away from noisy switching nodes. Maintain short ground returns so clock edges are not distorted by shared current paths. Because the counter is synchronous, route the up and down clock signals with comparable geometry and avoid long stubs that could cause unequal propagation between related control paths.

Condition mechanical switches, relay contacts, and long sensor outputs before driving CLOCK UP or CLOCK DOWN. Contact bounce can create several apparent clock transitions and corrupt the count. Use a clean edge source or a suitable debounce circuit, and verify that the resulting pulse width satisfies the operating limits specified in the manufacturer datasheet.

Operate the counter only within the supply-voltage range and input thresholds specified for the ordered device. CMOS inputs should not be left floating because an undefined level can produce an unwanted clock transition or extra supply current. Connect every unused control input to a defined valid logic level and include the supply rails in the schematic and PCB review.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

No definitive environmental or automotive qualification declarations are included in the manufacturer product material for this order code. The CD40192BD is a general-purpose CMOS logic counter rather than an AEC-Q100-qualified automotive device.

הנתונים אומתו בתאריך: 2026-11-15 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

CD40192BD datasheet CD40192BD pinout CD40192BD datasheet pdf CD40192BD equivalent CD40192BD replacement CD40192BD drop-in substitute CD40192BD price CD40192BD stock Texas Instruments CD40192BD CD40192BD 4 bit BCD counter CD40192BD 16 pin SOIC CD40192BD application circuit CD40192BD vs CD40193B

רכיבים ומונחים קשורים

Texas Instruments CD40192BD CD40192B CD40193B CD40192BE CD40192BPWR CMOS BCD up/down counter presettable counter four-bit counter decade counter synchronous counter gated D-type flip-flop dual clock CLOCK UP CLOCK DOWN PRESET ENABLE master RESET jam inputs CARRY output BORROW output 16-pin SOIC QFN family
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר