MT47H64M16HR-3:G - 1Gb DDR2 SDRAM 333MHz | Micron | 84-FBGA
MPN: MT47H64M16HR-3:G ✓ פעילMT47H64M16HR-3:G סקירה
DDR2 SDRAM (Double Data Rate 2 Synchronous Dynamic Random-Access Memory) is a volatile memory technology that transfers data on both the rising and falling edges of the clock, doubling throughput versus single-data-rate SDRAM. DDR2 builds on DDR1 with a 4n-bit prefetch architecture, on-die termination (ODT), and a lower 1.8 V core and I/O voltage, which reduces power versus 2.5 V DDR1. In the memory hierarchy, DDR2 SDRAM sits between the memory controller and the DRAM array, providing the working memory for embedded processors, networking equipment, and legacy computing platforms.
Key features of the MT47H64M16HR-3:G include a 1 Gbit density in a 64M x 16 configuration, 333 MHz clock (667 MT/s data rate), 450 ps access time, 1.7 V to 1.9 V supply voltage, and an 84-FBGA (8 x 12.5 mm) package. The device supports programmable CAS latency (CL=3 for the -3 speed grade), burst lengths of 4 or 8, and sequential or interleaved burst types. The differential data strobe (DQS/DQS#) improves signal integrity at high data rates, while the 4n-bit prefetch architecture enables high bandwidth with a modest internal clock.
The MT47H64M16HR-3:G uses Micron's DDR2 process technology with an on-chip DLL for clock synchronization and ODT for impedance matching. The 8-bank architecture allows concurrent operations across banks, improving effective bandwidth. The 1.8 V SSTL_18 I/O interface is compatible with JEDEC-standard DDR2 memory controllers, and the 84-FBGA package provides a compact footprint for space-constrained embedded designs.
Typical applications include embedded computing platforms, industrial control systems, networking and telecom equipment, legacy computing and server memory upgrades, and test and measurement instrumentation. The 1 Gbit density and 333 MHz speed make it suitable for designs requiring moderate memory capacity with DDR2-era memory controllers.
When designing with this device, ensure proper termination and impedance matching on the DDR2 bus, and verify that the memory controller supports the -3 speed grade (CL=3, 333 MHz). The 1.8 V supply must be well-regulated and decoupled to maintain signal integrity.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing engineers with a single reference for the MT47H64M16HR-3:G DDR2 SDRAM.
חלופות תחליף ישיר עבור MT47H64M16HR-3:G — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
MT47H64M16HR-3 IT:G
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
MT47H64M16HR-3:H
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
MT47H64M16HR-25E:H
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
MT47H64M16HR-3 L:G
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
K4T1G164QF-BCF7
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
MT47H64M16HR-3:G דירוגים מרביים ומאפיינים חשמליים
| סוג זיכרון | DDR2 SDRAM |
| גודל זיכרון | 1 Gbit |
| ארגון | 64M x 16 (8 Meg x 16 x 8 banks) |
| Clock Frequency | 333 MHz |
| קצב נתונים | 667 MT/s (DDR2-667) |
| Access Time | 450 ps |
| מתח אספקה | 1.7 V to 1.9 V |
| I/O Voltage | 1.8 V (SSTL_18-compatible) |
| ממשק | Parallel |
| מארז | 84-FBGA (8 x 12.5 mm) |
| סוג הרכבה | Surface Mount |
| טמפרטורת פעולה | 0C to +85C (commercial) |
| השהיית CAS | CL=3 (-3 speed grade) |
| Burst Length | 4 or 8 |
| Data Strobe | Differential (DQS, DQS#) |
| Prefetch Architecture | 4n-bit |
| סטטוס RoHS | Compliant |
תצורת פינים של MT47H64M16HR-3:G
| פין A1 | VDD — Power supply 1.8 V |
| פין A2 | VSSQ — I/O ground |
| פין A3 | DQ0 — Data input/output |
| פין A4 | VDDQ — I/O power supply 1.8 V |
| פין A5 | DQ2 — Data input/output |
| פין A6 | VSSQ — I/O ground |
| פין A7 | DQ4 — Data input/output |
| פין A8 | VDDQ — I/O power supply 1.8 V |
| פין A9 | DQ6 — Data input/output |
| פין B1 | VSS — Ground |
| פין B2 | DQ1 — Data input/output |
| פין B3 | VSSQ — I/O ground |
| פין B4 | DQ3 — Data input/output |
| פין B5 | VSSQ — I/O ground |
| פין B6 | DQ5 — Data input/output |
| פין B7 | VSSQ — I/O ground |
| פין B8 | DQ7 — Data input/output |
| פין B9 | VSSQ — I/O ground |
| פין C1 | VDDQ — I/O power supply 1.8 V |
| פין C2 | DQS — Data strobe |
| פין C3 | VSSQ — I/O ground |
| פין C4 | DQ8 — Data input/output |
| פין C5 | VDDQ — I/O power supply 1.8 V |
| פין C6 | DQ10 — Data input/output |
| פין C7 | VSSQ — I/O ground |
| פין C8 | DQ12 — Data input/output |
| פין C9 | VDDQ — I/O power supply 1.8 V |
| פין D1 | DQS# — Differential data strobe |
| פין D2 | VSSQ — I/O ground |
| פין D3 | DQ9 — Data input/output |
| פין D4 | VSSQ — I/O ground |
| פין D5 | DQ11 — Data input/output |
| פין D6 | VSSQ — I/O ground |
| פין D7 | DQ13 — Data input/output |
| פין D8 | VSSQ — I/O ground |
| פין D9 | DQ15 — Data input/output |
| פין E1 | VDD — Power supply 1.8 V |
| פין E2 | DQ14 — Data input/output |
| פין E3 | VDDQ — I/O power supply 1.8 V |
| פין E4 | LDQS — Lower data strobe |
| פין E5 | VDDQ — I/O power supply 1.8 V |
| פין E6 | UDQS — Upper data strobe |
| פין E7 | VDDQ — I/O power supply 1.8 V |
| פין E8 | LDQS# — Lower differential data strobe |
| פין E9 | VDDQ — I/O power supply 1.8 V |
| פין F1 | VSS — Ground |
| פין F2 | UDQS# — Upper differential data strobe |
| פין F3 | VSSQ — I/O ground |
| פין F4 | VREF — Reference voltage |
| פין F5 | VSSQ — I/O ground |
| פין F6 | CK — Clock input |
| פין F7 | VSSQ — I/O ground |
| פין F8 | CK# — Differential clock input |
| פין F9 | VSSQ — I/O ground |
| פין G1 | VDDQ — I/O power supply 1.8 V |
| פין G2 | CKE — Clock enable |
| פין G3 | VDDQ — I/O power supply 1.8 V |
| פין G4 | A0 — Address input |
| פין G5 | VDDQ — I/O power supply 1.8 V |
| פין G6 | A2 — Address input |
| פין G7 | VDDQ — I/O power supply 1.8 V |
| פין G8 | A4 — Address input |
| פין G9 | VDDQ — I/O power supply 1.8 V |
| פין H1 | VSS — Ground |
| פין H2 | A1 — Address input |
| פין H3 | VSSQ — I/O ground |
| פין H4 | A3 — Address input |
| פין H5 | VSSQ — I/O ground |
| פין H6 | A5 — Address input |
| פין H7 | VSSQ — I/O ground |
| פין H8 | A6 — Address input |
| פין H9 | VSSQ — I/O ground |
| פין J1 | VDD — Power supply 1.8 V |
| פין J2 | A7 — Address input |
| פין J3 | VDDQ — I/O power supply 1.8 V |
| פין J4 | A8 — Address input |
| פין J5 | VDDQ — I/O power supply 1.8 V |
| פין J6 | A9 — Address input |
| פין J7 | VDDQ — I/O power supply 1.8 V |
| פין J8 | A10 — Address input |
| פין J9 | VDDQ — I/O power supply 1.8 V |
| פין K1 | VSS — Ground |
| פין K2 | BA0 — Bank address input |
| פין K3 | VSSQ — I/O ground |
| פין K4 | BA1 — Bank address input |
| פין K5 | VSSQ — I/O ground |
| פין K6 | BA2 — Bank address input |
| פין K7 | VSSQ — I/O ground |
| פין K8 | A11 — Address input |
| פין K9 | VSSQ — I/O ground |
| פין L1 | VDDQ — I/O power supply 1.8 V |
| פין L2 | A12 — Address input |
| פין L3 | VDDQ — I/O power supply 1.8 V |
| פין L4 | CS# — Chip select |
| פין L5 | VDDQ — I/O power supply 1.8 V |
| פין L6 | RAS# — Row address strobe |
| פין L7 | VDDQ — I/O power supply 1.8 V |
| פין L8 | CAS# — Column address strobe |
| פין L9 | VDDQ — I/O power supply 1.8 V |
| פין M1 | VSS — Ground |
| פין M2 | WE# — Write enable |
| פין M3 | VSSQ — I/O ground |
| פין M4 | ODT — On-die termination |
| פין M5 | VSSQ — I/O ground |
| פין M6 | NC — Not connected (per datasheet) |
| פין M7 | VSSQ — I/O ground |
| פין M8 | NC — Not connected (per datasheet) |
| פין M9 | VSSQ — I/O ground |
| פין N1 | VDD — Power supply 1.8 V |
| פין N2 | VSS — Ground |
| פין N3 | VDD — Power supply 1.8 V |
| פין N4 | VSS — Ground |
| פין N5 | VDD — Power supply 1.8 V |
| פין N6 | VSS — Ground |
| פין N7 | VDD — Power supply 1.8 V |
| פין N8 | VSS — Ground |
| פין N9 | VDD — Power supply 1.8 V |
יישומים טיפוסיים
MT47H64M16HR-3:G מתאים עבור 6 יישוםs: Embedded Computing Platforms, Industrial Control Systems, Networking and Telecom Equipment, Legacy Computing and Server Memory Upgrades, Test and Measurement Instrumentation, Consumer Electronics and Set-Top Boxes.
Embedded Computing Platforms
The MT47H64M16HR-3:G provides 1 Gbit of DDR2 working memory for embedded processors and SoCs that use DDR2 memory controllers. Its 333 MHz clock and 667 MT/s data rate deliver sufficient bandwidth for embedded operating systems, while the 64M x 16 organization matches the 16-bit data bus common on embedded memory controllers. The 1.8 V SSTL_18 interface is directly compatible with JEDEC-standard DDR2 PHYs, and the 84-FBGA package saves board space. Designers should verify that the SoC memory controller supports the -3 speed grade (CL=3) and provide proper ODT and termination on the DDR2 bus to maintain signal integrity at 667 MT/s.
מומלץ
Industrial Control Systems
The MT47H64M16HR-3:G is used in industrial control and automation equipment that requires reliable DDR2 memory for program and data storage. Its 1 Gbit density supports control algorithms, data logging, and HMI buffers, while the 333 MHz speed provides adequate bandwidth for real-time control loops. The commercial temperature grade (0C to +85C) suits controlled factory environments; for extended-temperature installations, the MT47H64M16HR-3 IT:G variant is recommended. The 84-FBGA package and 1.8 V supply simplify integration into existing DDR2-based industrial boards, and the JEDEC-standard interface ensures compatibility with common industrial memory controllers.
מומלץ
Networking and Telecom Equipment
The MT47H64M16HR-3:G provides packet buffer and routing-table memory for networking and telecom equipment such as routers, switches, and gateways. The 667 MT/s data rate supports line-rate packet processing at moderate throughputs, while the 1 Gbit density accommodates forwarding tables and queue buffers. The differential DQS/DQS# strobes improve signal integrity on the DDR2 bus, which is critical in dense networking PCBs with multiple memory devices. The 1.8 V supply and 84-FBGA package align with standard networking board designs. Designers should ensure adequate decoupling and controlled-impedance routing to meet DDR2 timing margins at 333 MHz.
מומלץ
Legacy Computing and Server Memory Upgrades
The MT47H64M16HR-3:G serves as a replacement or upgrade memory device for legacy computing platforms and servers that use DDR2 SDRAM. Its 1 Gbit density and 333 MHz speed match the requirements of DDR2-era memory controllers, enabling repair and maintenance of existing systems. The 64M x 16 organization is compatible with standard DDR2 DIMM and SO-DIMM architectures, and the 84-FBGA package is the industry-standard footprint for DDR2 components. As DDR2 is a legacy technology, availability may be limited; designers should verify stock and consider the MT47H64M16HR-3 IT:G for extended-temperature server environments.
מומלץ
Test and Measurement Instrumentation
The MT47H64M16HR-3:G is used in test and measurement instruments for waveform capture, data buffering, and analysis. The 1 Gbit density provides sufficient storage for high-sample-rate acquisition buffers, while the 667 MT/s data rate supports fast data transfer to the instrument processor. The 1.8 V SSTL_18 interface and differential DQS/DQS# strobes maintain signal integrity in mixed-signal instrument designs. The 84-FBGA package allows compact layouts. Designers should pay attention to power supply decoupling and ground plane integrity to minimize noise coupling into sensitive analog measurement circuits.
מומלץ
Consumer Electronics and Set-Top Boxes
The MT47H64M16HR-3:G provides system memory for consumer electronics such as set-top boxes, digital TVs, and media players that use DDR2 memory. The 1 Gbit density supports operating systems, video buffers, and application data, while the 333 MHz speed handles standard-definition and moderate high-definition video processing. The 1.8 V supply reduces power versus DDR1, and the 84-FBGA package fits compact consumer PCBs. The commercial temperature grade suits indoor consumer environments. Designers should verify the SoC memory controller compatibility and provide adequate thermal relief for the FBGA package in enclosed consumer devices.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור MT47H64M16HR-3:G — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | MT47H64M16HR-3 IT:G | MT47H64M16HR-3:H | MT47H64M16HR-25E:H | K4T1G164QF-BCF7 |
|---|---|---|---|---|---|
| Package | 84-FBGA (8 x 12.5 mm) | 84-FBGA (8 x 12.5 mm) - same | 84-FBGA (8 x 12.5 mm) - same | 84-FBGA (8 x 12.5 mm) - same | FBGA-84 - same |
| Brand | Micron Technology | Micron Technology | Micron Technology | Micron Technology | Samsung Electronics |
| Memory Size | 1 Gbit | 1 Gbit | 1 Gbit | 1 Gbit | 1 Gbit |
| Organization | 64M x 16 | 64M x 16 | 64M x 16 | 64M x 16 | 64M x 16 |
| Clock Frequency | 333 MHz | 333 MHz | 333 MHz | 400 MHz | 333 MHz |
| Supply Voltage | 1.7 V to 1.9 V | 1.7 V to 1.9 V | 1.7 V to 1.9 V | 1.7 V to 1.9 V | 1.7 V to 1.9 V |
| Operating Temperature | 0C to +85C (commercial) | -40C to +85C (industrial) | 0C to +85C (commercial) | 0C to +85C (commercial) | 0C to +85C (commercial) |
| CAS Latency | CL=3 | CL=3 | CL=3 | CL=4 | CL=3 |
| Access Time | 450 ps | 450 ps | 450 ps | 400 ps | 450 ps |
| Data Rate | 667 MT/s | 667 MT/s | 667 MT/s | 800 MT/s | 667 MT/s |
מבדילים עיקריים
- Commercial temperature grade at lower cost (לעומתMT47H64M16HR-3 IT:G)
- Standard 333 MHz DDR2-667 speed grade (לעומתMT47H64M16HR-25E:H)
- Micron DDR2 reliability and JEDEC compliance (לעומתK4T1G164QF-BCF7)
הערות תכנון
Route DDR2 data and strobe traces with controlled 50 ohm single-ended impedance and match trace lengths within each byte lane to within +/- 5 mm. The differential DQS/DQS# pairs should be routed as 100 ohm differential pairs with matched intra-pair skew. Keep the DDR2 bus away from sensitive analog or RF traces to avoid coupling. Use a solid ground plane under the DDR2 bus for return current control.
Decouple the 1.8 V VDD and VDDQ supplies with 0.1 uF ceramic capacitors placed as close as possible to each power ball, plus bulk 10 uF capacitors per device. The VREF pin requires a stable reference, typically generated by a resistor divider from VDDQ with a 0.1 uF bypass capacitor. Estimated: at 667 MT/s, the device draws approximately 200-300 mA depending on access patterns; size the regulator accordingly.
Do not exceed the 1.9 V maximum supply voltage, as this can damage the DDR2 SDRAM. Verify that the memory controller supports the -3 speed grade (CL=3, 333 MHz) before designing in this part. The ODT (on-die termination) pin must be properly controlled by the memory controller; incorrect ODT settings cause signal integrity failures at 667 MT/s. For extended-temperature applications, use the MT47H64M16HR-3 IT:G variant.
מידע על תאימות
RoHS compliant per distributor data. Not AEC-Q100 qualified; commercial and industrial temperature grades available. Halogen-free status not confirmed in provided data.
