2ED21064S06JXUMA1 vs 1EBN1001AEXUMA1 तुलना
विस्तृत दोनों ओर की तुलना 2ED21064S06JXUMA1 द्वारा Infineon और 1EBN1001AEXUMA1 द्वारा Infineon. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Infineon
2ED21064S06JXUMA1 - 650V 0.7A Half-Bridge Gate Driver | Infineon
2ED21064S06JXUMA1 ✓ सक्रियInfineon
1EBN1001AEXUMA1 - 15A Isolated Gate Driver Booster | Infineon EiceDRIVER™
1EBN1001AEXUMA1 ✓ सक्रियविशेषता तुलना
| पैरामीटर | 2ED21064S06JXUMA1 | 1EBN1001AEXUMA1 |
|---|---|---|
| ब्रांड | Infineon | Infineon |
| श्रेणी | Power MOSFET Drivers | Power MOSFET Drivers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| फ़ंक्शन | High-Side and Low-Side Gate Driver | — |
| Configuration | Half-Bridge (2 outputs, non-inverting) | High-Side / Low-Side (non-inverting booster) |
| टोपोलॉजी | High-Side, Low-Side with integrated bootstrap diode | — |
| Maximum Offset / Boot Voltage | 650 V | — |
| Supply Voltage (VCC) | 10 V to 20 V | — |
| Source Current (typical) | 0.29 A | — |
| Sink Current (typical) | 0.7 A | — |
| Rise Time (typical) | [DATA_NEEDED: rise time] | — |
| Fall Time (typical) | [DATA_NEEDED: fall time] | — |
| Propagation Delay (typical) | 100 ns | — |
| Channel-to-Channel Delay Match | [DATA_NEEDED: channel-to-channel delay match] | — |
| Under-Voltage Lockout | Yes (both channels) | — |
| Bootstrap Diode | Integrated | — |
| Input Logic Compatibility | 3.3 V / 5 V CMOS | — |
| ऑपरेटिंग तापमान | -40C to +125C | -40 °C to +125 °C (automotive grade) |
| पैकेज | PG-DSO-14 (14-pin SOIC) | PG-DSO-14-43 (DSO EP, 14-pin, Tape & Reel) |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| MSL स्तर | [DATA_NEEDED: MSL level] | [DATA_NEEDED: MSL level] |
| RoHS स्थिति | ROHS3 Compliant | Compliant |
| Negative Gate Drive Robustness | -0.7 V | — |
| Product Type | — | Isolated single-channel IGBT/MOSFET gate driver booster |
| Series | — | EiceDRIVER™ Boost (1EBN family) |
| आउटपुट की संख्या | — | 2 (separate source and sink paths) |
| Peak Output Current | — | ±15 A |
| Number of Drivers | — | 1 |
| Input Signal | — | ASC input, active-clamping disable |
| Active Clamping | — | Yes (very fast reaction time) |
| Automotive Qualification | — | AEC-Q100 qualified |
| Target Switching Stage | — | Motor drives > 10 kW (up to 400 A modules) |