2ED21064S06JXUMA1 vs 1EBN1001AEXUMA1 مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ 2ED21064S06JXUMA1 بواسطة Infineon و 1EBN1001AEXUMA1 بواسطة Infineon. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
Infineon
1EBN1001AEXUMA1 - 15A Isolated Gate Driver Booster | Infineon EiceDRIVER™
1EBN1001AEXUMA1 ✓ نشطمقارنة المواصفات
| المعامل | 2ED21064S06JXUMA1 | 1EBN1001AEXUMA1 |
|---|---|---|
| العلامة التجارية | Infineon | Infineon |
| الفئة | Power MOSFET Drivers | Power MOSFET Drivers |
| حالة دورة الحياة | نشط | نشط |
| الوظيفة | High-Side and Low-Side Gate Driver | — |
| Configuration | Half-Bridge (2 outputs, non-inverting) | High-Side / Low-Side (non-inverting booster) |
| البنية الطوبولوجية | High-Side, Low-Side with integrated bootstrap diode | — |
| Maximum Offset / Boot Voltage | 650 V | — |
| Supply Voltage (VCC) | 10 V to 20 V | — |
| Source Current (typical) | 0.29 A | — |
| Sink Current (typical) | 0.7 A | — |
| Rise Time (typical) | [DATA_NEEDED: rise time] | — |
| Fall Time (typical) | [DATA_NEEDED: fall time] | — |
| Propagation Delay (typical) | 100 ns | — |
| Channel-to-Channel Delay Match | [DATA_NEEDED: channel-to-channel delay match] | — |
| Under-Voltage Lockout | Yes (both channels) | — |
| Bootstrap Diode | Integrated | — |
| Input Logic Compatibility | 3.3 V / 5 V CMOS | — |
| درجة حرارة التشغيل | -40C to +125C | -40 °C to +125 °C (automotive grade) |
| العلبة | PG-DSO-14 (14-pin SOIC) | PG-DSO-14-43 (DSO EP, 14-pin, Tape & Reel) |
| نوع التركيب | Surface Mount | Surface Mount |
| مستوى MSL | [DATA_NEEDED: MSL level] | [DATA_NEEDED: MSL level] |
| حالة RoHS | ROHS3 Compliant | Compliant |
| Negative Gate Drive Robustness | -0.7 V | — |
| Product Type | — | Isolated single-channel IGBT/MOSFET gate driver booster |
| Series | — | EiceDRIVER™ Boost (1EBN family) |
| عدد المخارج | — | 2 (separate source and sink paths) |
| Peak Output Current | — | ±15 A |
| Number of Drivers | — | 1 |
| Input Signal | — | ASC input, active-clamping disable |
| Active Clamping | — | Yes (very fast reaction time) |
| Automotive Qualification | — | AEC-Q100 qualified |
| Target Switching Stage | — | Motor drives > 10 kW (up to 400 A modules) |