BTS428L2ATMA1 vs BTS3035TFATMA1 तुलना

विस्तृत दोनों ओर की तुलना BTS428L2ATMA1 द्वारा Infineon और BTS3035TFATMA1 द्वारा Infineon. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Infineon
BTS428L2ATMA1 BTS428L2ATMA1 - 5.8A Smart High-Side Switch | Infineon

BTS428L2ATMA1 - 5.8A Smart High-Side Switch | Infineon

BTS428L2ATMA1 ✓ सक्रिय
Infineon
BTS3035TFATMA1 BTS3035TFATMA1 - 5A 12V Low-Side Switch | Infineon HITFET

BTS3035TFATMA1 - 5A 12V Low-Side Switch | Infineon HITFET

BTS3035TFATMA1 ✓ सक्रिय

विशेषता तुलना

पैरामीटर BTS428L2ATMA1 BTS3035TFATMA1
ब्रांड Infineon Infineon
श्रेणी Power MOSFET Drivers Power MOSFET Drivers
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type Smart High-Side Power Switch Low-Side Power Switch
Technology Smart SIPMOS (vertical N-channel MOSFET with charge pump) N-Channel MOSFET
Number of Channels 1 1
Input Type CMOS-compatible, ground-referenced CMOS Logic Level
On-State Resistance (R_DS(on)) 50 mOhm (typical) —
Continuous Load Current 5.8 A —
ऑपरेटिंग सप्लाई वोल्टेज [DATA_NEEDED: nominal and range] —
Standby Current Very low (per datasheet) —
Overvoltage Protection Load-dump / overvoltage clamp —
Overtemperature Protection Yes, with autorestart —
Diagnostic Feedback Yes (open-load, short-circuit, overtemperature) —
पैकेज PG-TO252-5-11 (DPAK-5, 4 leads + tab) PG-TO252-3-313 (DPAK)
माउंटिंग प्रकार Surface Mount Surface Mount
ऑपरेटिंग तापमान रेंज [DATA_NEEDED: min/max] -40C to +150C (junction)
RoHS / Pb-Free Yes (Green product, Pb-free finish, J-STD-020) —
Soldering Pb-free reflow per IPC/JEDEC J-STD-020 —
Qualification Automotive-grade (PROFET family) —
Continuous Drain Current — 5 A
On-Resistance (RDS(on)) — 30 mOhm (typical)
Drain-Source Voltage (VDS) Max — 40 V
Operating Voltage Range — 12 V nominal (load-dump tolerant to 40 V)
Fault Protection — Over-current, Short-circuit, Over-temperature, ESD
Status Feedback — Yes (open-drain diagnostic output)
Reverse Battery Protection — Integrated
MSL स्तर — [DATA_NEEDED: MSL moisture sensitivity level]
RoHS स्थिति — Compliant
Automotive Grade — AEC-Q100 qualified

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध