BTS428L2ATMA1 vs BTS3035TFATMA1 Karşılaştırma
Ayrıntılı yan yana karşılaştırma BTS428L2ATMA1 tarafından Infineon ve BTS3035TFATMA1 tarafından InfineonAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | BTS428L2ATMA1 | BTS3035TFATMA1 |
|---|---|---|
| Marka | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Product Type | Smart High-Side Power Switch | Low-Side Power Switch |
| Technology | Smart SIPMOS (vertical N-channel MOSFET with charge pump) | N-Channel MOSFET |
| Number of Channels | 1 | 1 |
| Input Type | CMOS-compatible, ground-referenced | CMOS Logic Level |
| On-State Resistance (R_DS(on)) | 50 mOhm (typical) | — |
| Continuous Load Current | 5.8 A | — |
| İşletim Besleme Gerilimi | [DATA_NEEDED: nominal and range] | — |
| Standby Current | Very low (per datasheet) | — |
| Overvoltage Protection | Load-dump / overvoltage clamp | — |
| Overtemperature Protection | Yes, with autorestart | — |
| Diagnostic Feedback | Yes (open-load, short-circuit, overtemperature) | — |
| Paket | PG-TO252-5-11 (DPAK-5, 4 leads + tab) | PG-TO252-3-313 (DPAK) |
| Montaj Türü | Surface Mount | Surface Mount |
| İşletim Sıcaklığı Aralığı | [DATA_NEEDED: min/max] | -40C to +150C (junction) |
| RoHS / Pb-Free | Yes (Green product, Pb-free finish, J-STD-020) | — |
| Soldering | Pb-free reflow per IPC/JEDEC J-STD-020 | — |
| Qualification | Automotive-grade (PROFET family) | — |
| Continuous Drain Current | — | 5 A |
| On-Resistance (RDS(on)) | — | 30 mOhm (typical) |
| Drain-Source Voltage (VDS) Max | — | 40 V |
| Operating Voltage Range | — | 12 V nominal (load-dump tolerant to 40 V) |
| Fault Protection | — | Over-current, Short-circuit, Over-temperature, ESD |
| Status Feedback | — | Yes (open-drain diagnostic output) |
| Reverse Battery Protection | — | Integrated |
| MSL Seviyesi | — | [DATA_NEEDED: MSL moisture sensitivity level] |
| RoHS Durumu | — | Compliant |
| Automotive Grade | — | AEC-Q100 qualified |