BTS428L2ATMA1 vs BTS3035TFATMA1 Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng BTS428L2ATMA1 sa pamamagitan ng Infineon at BTS3035TFATMA1 sa pamamagitan ng Infineon. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Pagsanggunian na paghahambing
| Parametro | BTS428L2ATMA1 | BTS3035TFATMA1 |
|---|---|---|
| Brand | Infineon | Infineon |
| Kategorya | Power MOSFET Drivers | Power MOSFET Drivers |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Product Type | Smart High-Side Power Switch | Low-Side Power Switch |
| Technology | Smart SIPMOS (vertical N-channel MOSFET with charge pump) | N-Channel MOSFET |
| Number of Channels | 1 | 1 |
| Input Type | CMOS-compatible, ground-referenced | CMOS Logic Level |
| On-State Resistance (R_DS(on)) | 50 mOhm (typical) | — |
| Continuous Load Current | 5.8 A | — |
| Supply Voltage na Operasyon | [DATA_NEEDED: nominal and range] | — |
| Standby Current | Very low (per datasheet) | — |
| Overvoltage Protection | Load-dump / overvoltage clamp | — |
| Overtemperature Protection | Yes, with autorestart | — |
| Diagnostic Feedback | Yes (open-load, short-circuit, overtemperature) | — |
| Packhaging | PG-TO252-5-11 (DPAK-5, 4 leads + tab) | PG-TO252-3-313 (DPAK) |
| Uri ng Pagpapasok | Surface Mount | Surface Mount |
| Hanay ng Temperature na Operasyon | [DATA_NEEDED: min/max] | -40C to +150C (junction) |
| RoHS / Pb-Free | Yes (Green product, Pb-free finish, J-STD-020) | — |
| Soldering | Pb-free reflow per IPC/JEDEC J-STD-020 | — |
| Qualification | Automotive-grade (PROFET family) | — |
| Continuous Drain Current | — | 5 A |
| On-Resistance (RDS(on)) | — | 30 mOhm (typical) |
| Drain-Source Voltage (VDS) Max | — | 40 V |
| Operating Voltage Range | — | 12 V nominal (load-dump tolerant to 40 V) |
| Fault Protection | — | Over-current, Short-circuit, Over-temperature, ESD |
| Status Feedback | — | Yes (open-drain diagnostic output) |
| Reverse Battery Protection | — | Integrated |
| Level ng MSL | — | [DATA_NEEDED: MSL moisture sensitivity level] |
| Tindminan RoHS | — | Compliant |
| Automotive Grade | — | AEC-Q100 qualified |