BTS428L2ATMA1 vs BTS3035TFATMA1 So sánh

So sánh chi tiết song song của BTS428L2ATMA1 bằng Infineon và BTS3035TFATMA1 bằng Infineon. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Infineon
BTS428L2ATMA1 BTS428L2ATMA1 - 5.8A Smart High-Side Switch | Infineon

BTS428L2ATMA1 - 5.8A Smart High-Side Switch | Infineon

BTS428L2ATMA1 ✓ Hoạt động
Infineon
BTS3035TFATMA1 BTS3035TFATMA1 - 5A 12V Low-Side Switch | Infineon HITFET

BTS3035TFATMA1 - 5A 12V Low-Side Switch | Infineon HITFET

BTS3035TFATMA1 ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số BTS428L2ATMA1 BTS3035TFATMA1
Thương hiệu Infineon Infineon
Danh mục Power MOSFET Drivers Power MOSFET Drivers
Trạng thái vòng đời Hoạt động Hoạt động
Product Type Smart High-Side Power Switch Low-Side Power Switch
Technology Smart SIPMOS (vertical N-channel MOSFET with charge pump) N-Channel MOSFET
Number of Channels 1 1
Input Type CMOS-compatible, ground-referenced CMOS Logic Level
On-State Resistance (R_DS(on)) 50 mOhm (typical) —
Continuous Load Current 5.8 A —
Điện áp cung cấp hoạt động [DATA_NEEDED: nominal and range] —
Standby Current Very low (per datasheet) —
Overvoltage Protection Load-dump / overvoltage clamp —
Overtemperature Protection Yes, with autorestart —
Diagnostic Feedback Yes (open-load, short-circuit, overtemperature) —
Hộp PG-TO252-5-11 (DPAK-5, 4 leads + tab) PG-TO252-3-313 (DPAK)
Kiểu lắp đặt Surface Mount Surface Mount
Khoảng nhiệt độ hoạt động [DATA_NEEDED: min/max] -40C to +150C (junction)
RoHS / Pb-Free Yes (Green product, Pb-free finish, J-STD-020) —
Soldering Pb-free reflow per IPC/JEDEC J-STD-020 —
Qualification Automotive-grade (PROFET family) —
Continuous Drain Current — 5 A
On-Resistance (RDS(on)) — 30 mOhm (typical)
Drain-Source Voltage (VDS) Max — 40 V
Operating Voltage Range — 12 V nominal (load-dump tolerant to 40 V)
Fault Protection — Over-current, Short-circuit, Over-temperature, ESD
Status Feedback — Yes (open-drain diagnostic output)
Reverse Battery Protection — Integrated
Cấp MSL — [DATA_NEEDED: MSL moisture sensitivity level]
Trạng thái RoHS — Compliant
Automotive Grade — AEC-Q100 qualified

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá